LightHeaded 20289, 20281, 20285, 20217, 20273 Assembly Instructions Manual

...
“Canterbury” LightHeadedBed
Assembly Instructions
www.LightHeadedBeds.com
Model #20289 Full size, Chestnut Model #20281 Full size, Black Model #20285 Full size, White
9/17/2015
Before you begin:
Consider enlisting a family member or friend to help; it will make assembly easier,
faster, and more fun.
Layout all of the parts listed below.
Save all packing materials until assembly is complete to avoid accidentally
discarding smaller parts or hardware.
You will need a Phillips head screw driver (not included)
Page 1
Parts List
Part Description Quantity
Blister Pack
EPX
Contains the hardware required to assemble your new Lightheaded Bed
1
EPJ
Metal Washer
8
EPK
Metal Lock Washer
8
EPL
Machine Screw
11
EPM
Wood Screw
24
CWT
Allen Wrench
1
EPN
LightHeaded™ Headboardships with LightHeaded™ lighting component kit already installed
1
EQB
Caprail
1
EPO
Right Headboard Leg
1
EPP
Left Headboard Leg
1
EPQ
Footboard
1
EPR
Right Side Rail
1
EPS
Left Side Rail
1
EPT
Roll-Out Slats (12 pieces of wood connected with nylon straps)
1
EPV
Center Support Rail for Slats
1
EPW
Support Legs (Short and Long) for Center Support Rail
6
EPU
LightHeaded™ TechBox contains your remote control, power cord, LightHeaded™ Lighting Instructions (for use and LightHeaded™ Image changing),
and most importantly your $20 LightHeaded™ Image gift coupon
1
“Canterbury” LightHeadedBed
Assembly Instructions
www.LightHeadedBeds.com
Model #20289 Full size, Chestnut Model #20281 Full size, Black Model #20285 Full size, White
9/17/2015
Step 1
1. Orient the caprail (EQB) as shown, and insert the two dowels on each wood block into the holes at the top of the headboard (EPN). The wood blocks should be flush with the
back surface of the headboard. The center hole of each set of three holes is reserved for Step 2.
Wood blocks
Step 2
1. Insert one machine screw (EPL) into each wood block to secure the caprail to the headboard.
Wood block
EPL
EPL
EPL
EPN
EQB
Page 2
Loading...
+ 4 hidden pages