Page 1
A Division of:
Light Engineered Displays, Inc.
109 Portwatch Way
Wilmington, N.C. 28412
Phone: (800) 251-2512
Fax: (800) 251-9878
Internet: www.ledinc.com
Email: sales@ledinc.com
General Description
The AMC-5107 offers all of the features
you need for your basic leak and level
detection applications. It works with all
of the standard 5000 series liquid sensors and F4000 vapor sensor.
The AMC-5107 is suitable for large or
small scale tank and piping installations, for secondary containment and
interstitial monitoring, and for fuel oil
storage or bulk water tanks. Wherever
the possibility of leaking petroleum
liquid, vapor or water can occur, and for
level monitoring, trust the AMC-5107 for
worry-free performance.
AMC-5107
LEAK /LEVEL / VAPOR
For liquid substance monitoring:
Petroleum, alkalines, acids, water, etc...
MONITOR
AMC
SERIES
Features
Easy to wire
Can be powered from 12VDC or
10VAC
Level monitoring, leak detection
Multiple sensor input capability
Programmable internal relay
6 liquid zones, Intrinsically Safe
1 vapor zone, non I-S
Two stage self-test
Relay (dry contacts) can be set
normally energized. Rated 5A @
250VAC/30VDC
Specific channels can be tied to relay
Front panel label for sensor locations
Alarm acknowledge
(as on AMC-5100)
Acknowledged audio alarm will
reactivate after a 2 hour delay
Benefits
Affordable, low priced
Reduces insurance coverage
Very effective for small installations
Capable of a wide variety of
applications
No documentation needed to find
sensor location
Will reset on power failure conditions
Only have specific channels trigger
relay for selective alarming ability
(i.e. Shut down on petroleum leak,
not on water).
Page 2
AMC
SERIES
Specifications
AMC-5107
LEAK /LEVEL / VAPOR
MONITOR
AMC-5107 Monitor Unit
Dimensions: 6.125”W x 4.25“H x 2.d”D
(15.5cm W x 13.5cm H x 6.5cm D)
Enclosure Material: PVC
Power Requirements
Main Power: 12 VDC or 10 VAC @ 300 mA max
for an external Class 2 transformer or adapter.
Liquid Section Features
Monitoring Capability: 6 channels / zones.
Protection Circuit: Diode/resistor / fuse IS barrier.
Detectable Liquids: Water, petroleum-based
products, alkalies, some acids, etc. (consult
factory).
Liquid Sensor Types
Normally Open circuit (5000 series, 5008, 5010
series, 5014P, 5015, 5020 and 5025).
Normally Closed circuit (5010 reversed, 5016,
5016P and 5025).
Dual N/O & N/C circuit (5002B, 5007, 5011, 5017)
Note:
The 5020 probe can be used with a reconfigured
5107 monitor, via the water / petroleum select
jumpers.
Warranty
System Components: 1 year, parts and labor
(subject to standard LED terms and conditions).
Vapor Section Features
Monitoring Capability: 1 channel / zone.
Detectable Vapors: Petroleum based products.
Sensor: F4000 with V403 transmitter module.
Indicators and Alarms
Power Indicator: 1 Red LED bar.
Liquid Alarm Indicators: 6 Red LED bars.
Vapor Alarm Indicators: 1 Red LED bar.
Test Indicator: 1 Red LED bar.
System Failure Indicator: 1 Red LED bar.
Alarm Acknowledge Switch: External (front panel).
Audio Alarm Buzzer: Internal
Output
One SPST relay, common to all channels.
Operating Temperature Range
0 to +40 ºC (+32 to +104 ºF)
IMPORTANT: LED products should be used in compliance
with applicable federal, provincial, state and local laws and
regulations. Product selection should be based on physical
specifications and limitations and compatibility with the
environment and materials to be handled. LED MAKES NO
WARRANTY OF FITNESS FOR A PARTICULAR USE. All
information and specifications in the literature are based on
the latest product data available at the time of publication.
LED reserves the right to make changes at any time in price,
materials, specifications and to discontinue models without
notice or obligation.
Loading...