Light Emotion LEDBAR1803 User Instruction Manual

www.lightemotion.com.au

LEDBAR1803

Outdoor 1m LED Bar 18 x 3W 3-in-1 RGB LEDs

User’s instruction manual

This manual contains important information about the safe installation and use of this product

Please read this instruction manual carefully before installing or operating

Please keep these instructions in a safe place for future reference

V1.00

1

Contents

1. Safety Instructions 2

2. Installation 3

3. Features 3

4. Menu Operation 4

5. DMX Tables 5
5a. 2 Channel Mode 5
5b. 3 Channel Mode 5
5c. 4 Channel Mode 6
5d. 6 Channel Mode 6
5e. 7 Channel Mode 6
5f. 9 Channel Mode 7
5g. 18 Channel Mode 7
5h. 54 Channel Mode 8
5i. 56 Channel Mode 10

6. DMX Connection 12

7. DMX Address Setting 12

8. DMX Terminator 13

9. Cleaning and Maintenance 13

10. Technical Data 13

11. Warranty 14

2

Introduction

Thank you for the purchase of your LEDBAR1803 Outdoor 1m LED bar with 18 x 3w 3-in-1
LEDs by Light Emotion. We are confident you will be satisfied with your purchase and enjoy
many years of use from this Professional Light Emotion product. Please read these instructions
carefully to ensure the product is well look after and used correctly to avoid any potential
problems.

Please note that as part of our ongoing commitment to continuous improvement and product
development, the specifications in this manual are subject to change without notice. Whilst
every care has been taken in the preparation of this manual we reserve the right to change
specifications in the course of product improvement.

What is in the box:

- 1 x LEDBAR1803 Lighting Effect

- 1 x Power Cable

- This user manual and warranty card

1. Safety Instructions:

Please read these instructions carefully. It includes important information about the installation

usage and maintenance of this product.

- Please keep this User Manual for future consultation. If you sell the unit to another user, be

sure that they also receive this instruction booklet.

- Always make sure that you are connecting to the proper voltage and that the line voltage you

are connecting to is not higher than that stated on the sticker of the fixture.

- This is an outdoor water-proof rated unit. In order to ensure the fixture remains water-proof,

do not attempt to disassemble as in doing so the rubber seals and the like that help keep the

product water-proof may be damaged.

- Use only compatible water-proof cables for installation and connection

- Product can be used indoors as well

- Make sure there are no flammable materials close to the unit while operating.

- The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surface. Be sure that no ventilation slots are blocked.

- Always disconnect from power source before servicing.

- Secure fixture to stands, trussing and the like using a safety chain.

- Maximum ambient temperature is 50˚C. Do not operate fixture at temperatures higher than

this.

3

- In the event of serious operating problem, stop using the unit immediately. Never try to repair

the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.

Please contact the nearest authorized technical assistance center.

- Make sure power cord is never crimped or damaged.

- Never disconnect power cord by pulling or tugging on the cord.

- Never carry the fixture directly from the cord. Carry by holding the chassis of the unit.

- Avoid direct eye exposure to the light source while it is on.

2. Installation:

Caution: For safe mounting of this product, please read the following carefully.

- When mounting the product, do not stand directly underneath the product.

- When mounting in fixed installation, use the provided brackets. Please ensure the unit is
being attached securely to any surface – consult a professional for the installation if need be.

- For outdoor installations be sure that proper IP rated cables are used compatible with the
connections that come with the product.

- Always use a safety chain when mounting the product on stands, trussing or bars. Make sure
the breaking strain rating of the chain is at least 10 times the weight of the product.

- Product will work in any orientation.

- Make sure there is adequate ventilation around the product.

- Never look directly into the LED light sources of the product.

- Keep out of reach of children.

3. Features

This product is designed as an outdoor professional LED flood lighting effect and is only
intended to be used as such for entertainment, display and architectural applications. Due to
our ongoing commitment to constantly reviewing and improving products, features and
specifications are subject to change without prior notice.

- LEDs: 18 x 3W RGB TRI 3-in-1 LEDs with average 50000 hours lifespan

- Beam angle：15º

- Control: DMX or on-board built-in programs

- 10 different DMX modes to suit users’ needs

- DMX Channels: 2/3/4/6/7/9/18/54/56

- Functions: Colour mixing and fading, single colour, patterns, individual pixel control

- Electronic strobe rate: 1-25Hz

- Built in colour macros and programs

- Extruded rugged Aluminium housing

- IP65 rated

- Weight: 7kg

- Packed Dimensions 1060x110x170mm

4

4. Menu Operation

Used for setting up or operating the product without DMX control

Menu: Press each time to access features – see

table below.

UP: Increase setting

DOWN: Decrease setting

Enter: Confirm and save setting.

Menu Table:

No. Show Value Function

1 d001 001- 512

DMX512 starting address

2 R255 000 - 255

Red Dimming 0-100%

3 G255 000 - 255

Green Dimming 0-100%

4 B255 000 - 255

Blue Dimming 0-100%

5 FF99 00 - 99

RGB Strobe, speed from slow to fast

6 1JP0 0 - 9

Jump effect 01,Speed from slow to fast

7 2JP0 0 - 9

Jump effect 02,Speed from slow to fast

8 3JP0 0 - 9

Jump effect 03,Speed from slow to fast

9 4JP0 0 - 9

Jump effect 04,Speed from slow to fast

10 5JP0 0 - 9

Jump effect 05,Speed from slow to fast

11 6JP0 0 - 9

Jump effect 06,Speed from slow to fast

12 7JP0 0 - 9

Jump effect 07,Speed from slow to fast

13 8JP0 0 - 9

Jump effect 08,Speed from slow to fast

14 9JP0 0 - 9

Loops jump effect 01 to 08

15 1dE0 0 - 9

Red shade effect, Speed from slow to fast

16 2dE0 0 - 9

Green shade effect, Speed from slow to fast

17 3dE0 0 - 9

Blue shade effect, Speed from slow to fast

18 4dE0 0 - 9

Pink shade effect, Speed from slow to fast

19 5dE0 0 - 9

Yellow shade effect, Speed from slow to fast

20 6dE0 0 - 9

Loops red to yellow shade effect ,Speed from slow to fast

21 Sud0 0 - 9

Sound active, Speed from slow to fast

22 CH02

02/03/04/06/07/09/18/5

4/56

DMX channel mode / profile set