Light Emotion LEDBAR18012 User Manual

www.lightemotion.com.au

LEDBAR1812

Outdoor 1m LED Bar 18 x 12W 6-in-1 RGB LEDs

User’s instruction manual

This manual contains important information about the safe installation and use of this product

Please read this instruction manual carefully before installing or operating

Please keep these instructions in a safe place for future reference

V1.00

1

Contents

1. Safety Instructions 2

2. Installation 3

3. Features 3

4. Menu Operation 4

5. DMX Tables 5
5a. 2 Channel Mode 5
5b. 6 Channel Mode 6
5c. 8 Channel Mode 6
5d. 11 Channel Mode 6
5e. 108 Channel Mode 7
5f. 110 Channel Mode 8

6. DMX Connection 9

7. DMX Address Setting 9

8. DMX Terminator 10

9. Cleaning and Maintenance 10

10. Technical Data 10

11. Warranty 11

2

Introduction

Thank you for the purchase of your LEDBAR18012 Outdoor 1m LED bar with 18 x 12w
6-in-1 LEDs by Light Emotion. We are confident you will be satisfied with your purchase and
enjoy many years of use from this Professional Light Emotion product. Please read these
instructions carefully to ensure the product is well look after and used correctly to avoid any
potential problems.

Please note that as part of our ongoing commitment to continuous improvement and product
development, the specifications in this manual are subject to change without notice. Whilst
every care has been taken in the preparation of this manual we reserve the right to change
specifications in the course of product improvement.

What is in the box:

- 1 x LEDBAR1812 Lighting Effect

- 1 x Power Cable

- This user manual and warranty card

1. Safety Instructions:

Please read these instructions carefully. It includes important information about the installation

usage and maintenance of this product.

- Please keep this User Manual for future consultation. If you sell the unit to another user, be

sure that they also receive this instruction booklet.

- Always make sure that you are connecting to the proper voltage and that the line voltage you

are connecting to is not higher than that stated on the sticker of the fixture.

- This is an outdoor water-proof rated unit. In order to ensure the fixture remains water-proof,

do not attempt to disassemble as in doing so the rubber seals and the like that help keep the

product water-proof may be damaged.

- Use only compatible water-proof cables for installation and connection

- Product can be used indoors as well

- Make sure there are no flammable materials close to the unit while operating.

- The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surface. Be sure that no ventilation slots are blocked.

- Always disconnect from power source before servicing.

- Secure fixture to stands, trussing and the like using a safety chain.

- Maximum ambient temperature is 50˚C. Do not operate fixture at temperatures higher than

this.

3

- In the event of serious operating problem, stop using the unit immediately. Never try to repair

the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.

Please contact the nearest authorized technical assistance center.

- Make sure power cord is never crimped or damaged.

- Never disconnect power cord by pulling or tugging on the cord.

- Never carry the fixture directly from the cord. Carry by holding the chassis of the unit.

- Avoid direct eye exposure to the light source while it is on.

2. Installation:

Caution: For safe mounting of this product, please read the following carefully.

- When mounting the product, do not stand directly underneath the product.

- When mounting in fixed installation, use the provided brackets. Please ensure the unit is
being attached securely to any surface – consult a professional for the installation if need be.

- For outdoor installations be sure that proper IP rated cables are used compatible with the
connections that come with the product.

- Always use a safety chain when mounting the product on stands, trussing or bars. Make sure
the breaking strain rating of the chain is at least 10 times the weight of the product.

- Product will work in any orientation.

- Make sure there is adequate ventilation around the product.

- Never look directly into the LED light sources of the product.

- Keep out of reach of children.

3. Features

This product is designed as an outdoor professional LED flood lighting effect and is only
intended to be used as such for entertainment, display and architectural applications. Due to
our ongoing commitment to constantly reviewing and improving products, features and
specifications are subject to change without prior notice.

- LEDs: 18 x 12W RGBWAUV HEX 6-in-1 LEDs with average 50000 hours lifespan

- Beam angle：15º

- Control: DMX or on-board built-in programs

- 6 different DMX modes to suit users’ needs

- DMX Channels: 2/6/8/11/108/110

- Functions: Colour mixing and fading, single colour, patterns, individual pixel control

- Electronic strobe rate: 1-25Hz

- Built in colour macros and programs

- Extruded rugged Aluminium housing

- IP65 rated

- Weight: 10kg / 12kg gross

- Packed Dimensions 1060x130x150mm