Light Emotion LEDBALL6 User Instruction Manual

www.lightemotion.com.au

LEDBALL6

LED Rotating Ball with 5 x 15w HEX (6-in-1) LEDs.

User’s instruction manual

This manual contains important information about the safe installation and use of this product

Please read this instruction manual carefully before installing or operating

Please keep these instructions in a safe place for future reference

V1.02

1

Contents

1. Safety Instructions 2

2. Installation 3

3. Features 3

4. Product Overview 4

5. Menu Operation 5

6. DMX Table 5

7. DMX Address Setting 7

8. Error Messages 8

9. Rigging 8

10. Cleaning and Maintenance 8

11. Technical Data 9

12. Warranty 9

2

Introduction

Thank you for the purchase of your LEDBALL6 rotating LED Ball by Light Emotion. We are
confident you will be satisfied with your purchase and enjoy many years of use from this
Professional Light Emotion product. Please read these instructions carefully to ensure the
product is well look after and used correctly to avoid any potential problems.

Please note that as part of our ongoing commitment to continuous improvement and product
development, the specifications in this manual are subject to change without notice. Whilst
every care has been taken in the preparation of this manual we reserve the right to change
specifications in the course of product improvement.

What is in the box:

- 1 x LEDBALL6 Lighting Effect

- 1 x Quick lock handle

- 1 x Power Cable

- This user manual and warranty card

1. Safety Instructions:

Please read these instructions carefully. It includes important information about the installation

usage and maintenance of this product.

- Please keep this User Manual for future consultation. If you sell the unit to another user, be

sure that they also receive this instruction booklet.

- Always make sure that you are connecting to the proper voltage and that the line voltage you

are connecting to is not higher than that stated on the sticker of the fixture.

- This product is intended for indoor use only. To prevent risk of fire or shock, do not expose

fixture to rain or moisture.

- Make sure there are no flammable materials close to the unit while operating.

- The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surface. Be sure that no ventilation slots are blocked.

- Always disconnect from power source before servicing.

- Secure fixture to stands, trussing and the like using a safety chain.

- Maximum ambient temperature is 40˚C. Do not operate fixture at temperatures higher than

this.

- In the event of serious operating problem, stop using the unit immediately. Never try to repair

the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.

Please contact the nearest authorized technical assistance center.

- Make sure power cord is never crimped or damaged.

- Never disconnect power cord by pulling or tugging on the cord.

3

- Never carry the fixture directly from the cord. Carry by holding the base of the unit, and only

move when unit is upright.

- Avoid direct eye exposure to the light source while it is on.

2. Installation:

Caution: For safe mounting of this product, please read the following carefully.

- Use the included rapid lock clamp to attach to lighting stand, trussing or bar, together with
safety chain. See section 9 for detailed instructions regarding rigging.

- When mounting the product, do not stand directly underneath the product

- Always use a safety chain when mounting the product on stands, trussing or bars. Make sure
the breaking strain rating of the chain is at least 10 times the weight of the product.

- Make sure there is adequate ventilation around the product.

- This product is designed to be mounted either upright or upside down. It cannot be used in a
side orientation – for example: the product cannot be used with the base mounted on the wall
in a perpendicular orientation. This will cause severe damage to the motor and drive shaft and
could cause the ball to distort and even fall off.

- Never look directly into the LED light sources of the product.

- For indoor use only – do not use outdoors.

- To avoid electrical shock, keep away from rain and moisture.

- Keep out of reach of children.

3. Features

This product is designed as an LED lighting effect and is only intended to be used as an LED
lighting effect for entertainment and display applications. Due to our ongoing commitment to
constantly reviewing and improving products, features and specifications are subject to change
without prior notice.

- LEDs: 5 x 15W RGBWYUV HEX 6-in-1 LEDs with average 50000 hours lifespan

- Beam angle：1º

- Beam spot angle：1º

- Lenses: 98

- Pan: Infinite (endless rotation)

- Control: DMX, Sound Activation, Stand Alone, Master/Slave

- DMX Channels: 13

- Functions: Continuous rotation, strobing, variable speed rotation, individual colour control

- Electronic strobe rate: 1-25Hz

- Built in colour macros and programs

- IEC input/output, can link 20 units together.

- Weight: 3.65kg

- Packed Dimensions 355x355x485mm