Light Emotion LE60 User Instruction Manual

www.lightemotion.com.au

LE60

60w LED Moving Head Spot

User’s instruction manual

This manual contains important information about the safe installation and use of this product

Please read this instruction manual carefully before installing or operating

Please keep these instructions in a safe place for future reference

V1.00

1

Contents

1. Safety Instructions 2

2. Installation 3

3. Features 3

4. Menu Operation 4

5. Stand Alone Operation 5

6. Master/Slave Operation 5

7. DMX Table 5

8. DMX Connection 7

9. DMX Address Setting 7

10. DMX Terminator 8

11. Cleaning and Maintenance 8

12. Technical Data 9

13. Warranty 10

2

Introduction

Thank you for the purchase of your LE60 LED Moving Head Spot by Light Emotion. We are
confident you will be satisfied with your purchase and enjoy many years of use from this
Professional Light Emotion product. Please read these instructions carefully to ensure the
product is well look after and used correctly to avoid any potential problems.

Please note that as part of our ongoing commitment to continuous improvement and product
development, the specifications in this manual are subject to change without notice. Whilst
every care has been taken in the preparation of this manual we reserve the right to change
specifications in the course of product improvement.

What is in the box:

- 1 x LE60 Moving Head

- 1 x Power Cable

- 1 x Mounting bracket

- This user manual

1. Safety Instructions:

Please read these instructions carefully. It includes important information about the installation

usage and maintenance of this product.

- Please keep this User Manual for future consultation. If you sell the unit to another user, be

sure that they also receive this instruction booklet.

- Always make sure that you are connecting to the proper voltage and that the line voltage you

are connecting to is not higher than that stated on the sticker of the fixture.

- This fixture is designed for indoor use only and cannot be used for outdoor applications or

exposed to moisture.

- Make sure there are no flammable materials close to the unit while operating.

- The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surface. Be sure that no ventilation slots are blocked.

- Always disconnect from power source before servicing.

- Secure fixture to stands, trussing and the like using a safety chain.

- Due to the fact this is a moving head, be sure that the movement of the head is free from any

obstructions which could damage the unit if come into contact.

- Maximum ambient temperature is 40˚C. Do not operate fixture at temperatures higher than

this.

- In the event of serious operating problem, stop using the unit immediately. Never try to repair

the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.

Please contact the nearest authorized technical assistance centre.

3

- Make sure power cord is never crimped or damaged.

- Never disconnect power cord by pulling or tugging on the cord.

- Never carry the fixture directly from the cord. Carry by holding the chassis of the unit.

- Avoid direct eye exposure to the light source while it is on.

2. Installation:

Caution: For safe mounting of this product, please read the following carefully.

- When mounting the product, do not stand directly underneath the product.

- When mounting in fixed installation, use the provided brackets. Please ensure the unit is
being attached securely to any surface – consult a professional for the installation if need be.

- Always use a safety chain when mounting the product on stands, trussing or bars. Make sure
the breaking strain rating of the chain is at least 10 times the weight of the product.

- Product will work in either upright or upside down orientation. It cannot work in a
perpendicular orientation where the base is on the side as such – for example you cannot
mount the base to a wall with the moving head protruding out from the wall – this will cause
severe damage to the driver motors and ultimate failure.

- Make sure there is adequate ventilation around the product.

- Never look directly into the LED light sources of the product.

- Keep out of reach of children.

3. Features

This product is designed as a professional LED moving head and is only intended to be used as
such for entertainment, display and architectural applications. Due to our ongoing commitment
to constantly reviewing and improving products, features and specifications are subject to
change without prior notice.

- LED: 60w white LED source with average 50000 hours lifespan -

- Beam angle：12º

- Control: DMX, built-in programs, sound activation and Master/slave

- 9 and 11 channel DMX modes

- Pan 540 º Tilt 230 º

- 0-100% linear dimming

- LCD display menu with 4 control buttons

- Colour Wheel: 7 colours + open, rainbow flow effect

- Gobo Wheel: 7 fixed gobos + open, flow effect and gobo shake

- Weight: 3kg

- Product size: 194x151x285mm