Light Emotion FLAT0505R User Instruction Manual

www.lightemotion.com.au

FLAT0505R

Flat 5x5W 4-in-1 RGBW Wash Fixture with IR Remote

User’s instruction manual

This manual contains important information about the safe installation and use of this product

Please read this instruction manual carefully before installing or operating

Please keep these instructions in a safe place for future reference

V1.01

Contents

1. Safety Instructions 2

2. Installation 3

3. Features 3

4. Operation 4

Menu Functions 4
Explanations 5
DMX and DMX Tables 6

5. IR Remote Control 8

6. DMX Connections 9

7. DMX Address Setting 10

8. DMX Terminator 10

9. Cleaning and Maintenance 10

10. Technical Data 11

11. Warranty 11

1

Introduction

Thank you for the purchase of your FLAT0505 5x5W 4-in-1 RGBW Wash Fixture by Light Emotion. We are

confident you will be satisfied with your purchase and enjoy many years of use from this Professional Light

Emotion product. Please read these instructions carefully to ensure the product is well look after and used correctly

to avoid any potential problems.

Please note that as part of our ongoing commitment to continuous improvement and product development, the

specifications in this manual are subject to change without notice. Whilst every care has been taken in the

preparation of this manual we reserve the right to change specifications in the course of product improvement.

What is in the box:

- 1 x FLAT0505 fixture

- Power cable

- IR remote control

- This user manual

1. Safety Instructions:

Please read these instructions carefully. It includes important information about the installation usage and

maintenance of this product.

- Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also

receive this instruction booklet.

- Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to is

not higher than that stated on the sticker of the fixture.

- This product is intended for indoor use only. To prevent risk of fire or shock, do not expose fixture to rain or

moisture.

- Make sure there are no flammable materials close to the unit while operating.

- The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surface. Be sure that

no ventilation slots are blocked.

- Always disconnect from power source before servicing.

- Secure fixture to stands, trussing and the like using a safety chain.

- Maximum ambient temperature is 40˚C. Do not operate fixture at temperatures higher than this.

- In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself.

Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized

technical assistance centre.

- Make sure power cord is never crimped or damaged.

- Never disconnect power cord by pulling or tugging on the cord.

- Never carry the fixture directly from the cord. Carry by holding the unit directly or via the hanging bracket.

- Avoid direct eye exposure to the light source while it is on.

2

2. Installation:

Caution: For safe mounting of this product, please read the following carefully.

- Use a suitable clamp to attach to lighting stand, trussing or bar, together with safety chain.

- When mounting the product, do not stand directly underneath the product

- Always use a safety chain when mounting the product on stands, trussing or bars. Make sure the breaking strain

rating of the chain is at least 10 times the weight of the product.

- Make sure there is adequate ventilation around the product.

- Never look directly into the LED light or laser sources of the product.

- For indoor use only – do not use outdoors.

- To avoid electrical shock, keep away from rain and moisture.

3. Features

This product is designed as entertainment effect lighting fixture and is only intended to be used as an effect for

entertainment and production applications. Due to our ongoing commitment to constantly reviewing and improving

products, features and specifications are subject to change without prior notice.

It features 5 x 5W 4-in-1 LEDs which have red, green, blue and white built into each LED lens. Being 4-in-1, the

user has complete control over colours which emit from the one lens reducing any possibility of colour ghosting that

can occur with fixtures that use individual red, green and blue LEDs, and can also do pure white.

- Power input: AC 90V-240V/50HZ-60HZ

- Wattage: 28W

- LEDs: 5 pcs 5W (RGBW 4 in 1)

- Beam angle of LEDs: 40 degree

- 3-pin female XLR socket and 3-pin male XLR socket

- Built-in microphone

- Four button LED digit display

- Fuse: M205 1A slow blow

- Maximum 12 fixtures can be daisy chained together for power (DMX technically unlimited)

- Weight: 2.8 kg

- Size: 240x110x265mm

3