Light Emotion DERBY2 Installation Manual

www.lightemotion.com.au

DERBY2

2-in-1 Laser and Derby Effect.

User’s instruction manual

This manual contains important information about the safe installation and use of this product

Please read this instruction manual carefully before installing or operating

Please keep these instructions in a safe place for future reference

1

Contents

1. Safety Instructions 2

2. Installation 3

3. Features 3

4. Remote Control Operation 4

5. Menu Operation 5

6. DMX Table 5

7. DMX Address Setting 6

8. DMX Terminator 7

9. Rigging 8

10. Cleaning and Maintenance 8

11. Technical Data 8

12. Warranty 9

2

Introduction

Thank you for the purchase of your DERBY2 2-in-1 Laser and Derby effect by Light Emotion.
We are confident you will be satisfied with your purchase and enjoy many years of use from
this Professional Light Emotion product. Please read these instructions carefully to ensure the
product is well look after and used correctly to avoid any potential problems.

Please note that as part of our ongoing commitment to continuous improvement and product
development, the specifications in this manual are subject to change without notice. Whilst
every care has been taken in the preparation of this manual we reserve the right to change
specifications in the course of product improvement.

What is in the box:

- 1 x DERBY2 Lighting Effect

- 1 x Power Cable

- 1 x IR remote control

- 1 set laser key and remote plug

- This user manual

1. Safety Instructions:

Please read these instructions carefully. It includes important information about the installation

usage and maintenance of this product.

- Please keep this User Manual for future consultation. If you sell the unit to another user, be

sure that they also receive this instruction booklet.

- Always make sure that you are connecting to the proper voltage and that the line voltage you

are connecting to is not higher than that stated on the sticker of the fixture.

- This product is intended for indoor use only. To prevent risk of fire or shock, do not expose

fixture to rain or moisture.

- Make sure there are no flammable materials close to the unit while operating.

- The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surface. Be sure that no ventilation slots are blocked.

- Always disconnect from power source before servicing.

- Secure fixture to stands, trussing and the like using a safety chain.

- Maximum ambient temperature is 40˚C. Do not operate fixture at temperatures higher than

this.

- In the event of serious operating problem, stop using the unit immediately. Never try to repair

the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.

Please contact the nearest authorized technical assistance center.

- Make sure power cord is never crimped or damaged.