Light Emotion COB150RGBW User Instruction Manual

www.lightemotion.com.au

COB150RGBW

150W COB LED 4-in-1 RGBW Wash

User’s instruction manual

This manual contains important information about the safe installation and use of this product

Please read this instruction manual carefully before installing or operating

Please keep these instructions in a safe place for future reference

V1.01

1

Contents

1. Safety Instructions 2

2. Installation 3

3. Features 3

4. Operation 3

Menu Functions 4
Explanations 5

5. DMX Profile Charts 7

5A. Colour Macro Chart 11

6. DMX Connections 12

7. DMX Address Setting 12

8. DMX Terminator 12

9. Cleaning and Maintenance 13

10. Technical Data 13

11. Warranty 13

2

Introduction

Thank you for the purchase of your COB150RGBW COB LED 150W RGBW Wash Fixture by Light Emotion. We

are confident you will be satisfied with your purchase and enjoy many years of use from this Professional Light

Emotion product. Please read these instructions carefully to ensure the product is well look after and used correctly

to avoid any potential problems.

Please note that as part of our ongoing commitment to continuous improvement and product development, the

specifications in this manual are subject to change without notice. Whilst every care has been taken in the

preparation of this manual we reserve the right to change specifications in the course of product improvement.

What is in the box:

- 1 x COB150RGBW fixture

- Power cable

- 40 and 80 degree lens

- This user manual

1. Safety Instructions:

Please read these instructions carefully. It includes important information about the installation usage and

maintenance of this product.

- Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also

receive this instruction booklet.

- Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to is

not higher than that stated on the sticker of the fixture.

- This product is intended for indoor use only. To prevent risk of fire or shock, do not expose fixture to rain or

moisture.

- Make sure there are no flammable materials close to the unit while operating.

- The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surface. Be sure that

no ventilation slots are blocked.

- Always disconnect from power source before servicing.

- Secure fixture to stands, trussing and the like using a safety chain.

- Maximum ambient temperature is 40˚C. Do not operate fixture at temperatures higher than this.

- In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself.

Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized

technical assistance centre.

- Make sure power cord is never crimped or damaged.

- Never disconnect power cord by pulling or tugging on the cord.

- Never carry the fixture directly from the cord. Carry by holding the unit directly or via the hanging bracket.

- Avoid direct eye exposure to the light source while it is on.

3

2. Installation:

Caution: For safe mounting of this product, please read the following carefully.

- Use a suitable clamp to attach to lighting stand, trussing or bar, together with safety chain.

- When mounting the product, do not stand directly underneath the product

- Always use a safety chain when mounting the product on stands, trussing or bars. Make sure the breaking strain

rating of the chain is at least 10 times the weight of the product.

- Make sure there is adequate ventilation around the product.

- Never look directly into the LED light or laser sources of the product.

- For indoor use only – do not use outdoors.

- To avoid electrical shock, keep away from rain and moisture.

3. Features

This product is designed as entertainment effect lighting fixture and is only intended to be used as an effect for

entertainment and production applications. Due to our ongoing commitment to constantly reviewing and improving

products, features and specifications are subject to change without prior notice.

It features 1 150W COB LED RGBW 4-in-1 which is a single LED source designed to be very bright. Being 4-in-1,

the user has complete control over colours which emit from the one lens reducing any possibility of colour ghosting

that can occur with fixtures that use individual red, green, blue and white LEDs.

This unit has built-in protection which will shut off the unit should its internal temperature reach 85 degrees C. This

protects the internal electronics and components from damage caused by over heating.

- Power input: AC 100V-240V/50HZ-60HZ

- Wattage: 132W

- LEDs: 1 pc 150W COB LED (RGBW 4 in 1)

- Beam angle of LEDs: 80 degree, or 40 degree with interchangeable lens included

- 3-pin female XLR socket and 3-pin male XLR socket

- Built-in microphone

- Four button LED digit display

- Fuse: M250 3A slow blow

- Maximum 5 fixtures can be daisy chained together for power (DMX technically unlimited)

- Weight: 4.1 kg

- Size: 415x245x192mm

4. Operation

The COB150RGBW has 7 kinds of operation mode which are as follows:

Manual dimmer colour mode, Sound active mode, Auto-run program mode, Static colour

select mode, Other program select mode, Slave mode, DMX mode

4

The modes of operation are selected using the MODE button. Pressing the MODE button repeatly

will reach positions as per the table below. Then press SET UP followed by UP / Down to access

the attributes of each mode.

When you are using the MODE / SET UP / UP / DOWN LED display, the unit will lock the display

if there is no input over 30 seconds. To unlock, press and hold down MODE button for 3 seconds

before gaining access to the units menu options.

MODE manual SET UP manual UP/DOWN manual Instruction

DMX MODE

Address

~

Sets the DMX starting address

Channels

The unit occupies 3 DMX channels

The unit occupies 4 DMX channels

The unit occupies 5 DMX channels

The unit occupies 6 DMX channels

The unit occupies 9 DMX channels

NO DMX mode

When DMX signal is lost or interrupted,the unit

will default to BLACKOUT option.It will switch all

LED’s off

When DMX signal is lost or interrupted,the unit

will default to HOLD option.It will hold the last

state before signal was lost.

When DMX signal is lost or interrupted,the unit

will default to AUTO option.It will run the internal

programs.

SLAVE MODE Slave mode

Set the unit into slave mode

DIMMER

MODE

Red dimmer

~

Adjust the intensity of the red colour

Green dimmer

~

Adjust the intensity of the green colour

Blue dimmer

~

Adjust the intensity of the blue colour

White dimmer

~

Adjust the intensity of the white colour

Flash

~ Adjust the flash speed, is flash

off, is slowest, is fastest

SOUND MODE

Mode select

~

Select the 16 built-in sound modes

Sensitivity select

~ Adjust the sensitivity of the sound-active,

is the lowest level, is the highest level

AUTO

RUN

MODE

Dreaming mode set

~

Select the 16 built-in dreaming mode

Jumping mode set

~

Select the 16 built-in jumping mode

Auto

Dreaming&Jumping

mode

Set the light in auto dreaming&jumping mode,the

dreaming mode and jumping mode will run in a

continuous cycle

Speed set

~

Adjust the speed of the dreaming/jumping mode

STATIC

COLOUR

SELECT MODE

Colour select

~

Select the 64 static colours

Flash

~ Adjust the flash speed, is flash

off,

is slowest, is fastest