Light Emitting Designs ILX3525 Series Installation Manual
FEATURES AND APPLICATIONS
• L70 Rating @ Ta 25°C Over 150,000 hour rated life
• Low - Mid Bay applications
• Available in Type II, V Square
• 10-Year Limited Warranty
• IP68 - waterproof rated fixture
• Indoor / outdoor applications
• Low profile industrial grade design
• Easy to install with versatile mounting system
• Food Processing Plants
• Billboards
• Warehouses
• Parking Structures
• Canopy Lighting
• Tunnels
• Mining
• Refineries & Petrochemical Plants
ITEMS INCLUDED FOR INSTALLATION
Made in Taiwan
Designed and Engineered in the USA
• One ILX3525 LED Industrial Light with SSL pre-mount
• One (SSL) Spring Loaded Snap & Slide Surface Mounting Bracket
• Four sets of anchoring kit for concrete surfaces
• One standard wire fitting for junction-box knockout hole
• Installation manual
INSTALLATION GUIDE
SSL - Spring Loaded Snap & Slide Surface Mounting
R HS
o
compliant
IP68
01
ILX3525 Series
LED Industrial Lighting
Made in Taiwan
Designed and Engineered in the USA
External Dimensions
RISK OF ELECTRIC SHOCK
• Installation must be done by a certified electrician
and / or qualified personnel.
• Make sure to Slide OFF the main power from the circuit
breaker or fuse box before installing, servicing or
inspecting this fixture.
• Make sure all grounding wires are connected correctly.
WARNING
RISK OF FIRE
• Ensure that all line voltage wire is intended for specified
product wattage.
• Use UL and/or CE approved wires for all input connections,
minimum size required 18 AWG(0.82mm²)
• Do not use this product in environments where the
temperatures could exceed 60°C (140°F)
* BEFORE YOU INSTALL this fixture please read these instructions carefully and completely
Packaging Information
Case Quantity Dimensions (LxWxH) Weight
1
38.5 x 28.5 x 16.5 cm
15⅛ x 11¼ x 6½ in
5.7 kg
12.5 Ibs
INSTALLATION GUIDE
83mm
3¼"
117mm
4⅝"
13¾"
350mm
9⅞"
250mm
SSL - Spring Loaded Snap & Slide Surface Mounting
R HS
o
compliant
IP68
02
ILX3525 Series
LED Industrial Lighting
R HS
o
compliant
IP68
1.
2.
Made in Taiwan
Designed and Engineered in the USA
• Handle fixture with care while unpacking
the unit from its packaging and carefully
examine the unit for defects before
installing. Report any damage and save
all packing materials if any part is
damaged during transport. We
recommend wearing work gloves when
installing this fixture to prevent dirt and oil
from coming into contact with the fixture.
• Use the SSL mounting bracket as a
template to mark the screw holes location
onto the intended surface.
INSTALLATION GUIDE
SSL - Spring Loaded Snap & Slide Surface Mounting
03
ILX3525 Series
LED Industrial Lighting
Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
3.
4.
• For concrete surfaces use a Ø5/16"
(8.0mm) drill bit and drill holes 1-3/8"
(35mm) deep at the marked locations.
(Make sure that all dimensions are precise)
• Hammer all four concrete anchors into the
four drilled holes until they are flush with
the surface.
• Tighten all four hexagon spacers firmly
into the concrete anchors.
• For wooden surfaces use a Ø1/8"
(5.0mm) drill bit and drill holes 1-3/8"
(35mm) deep at the marked locations.
• Tighten all four hexagon spacers firmly
into the drilled holes.
• Align and tighten the SSL (Spring
Loaded Snap and Slide Surface Mounting
Bracket) onto the hexagon spacers using
the hexagon nuts and washers provided
in the kit.
Concrete Wood
INSTALLATION GUIDE
SSL - Spring Loaded Snap & Slide Surface Mounting
04
ILX3525 Series
LED Industrial Lighting
Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
5.
• Align the 4 spring loaded bolts located on top of the fixture with the 4 larger holes along the
semicircular slotted holes.
• Push the fixture firmly upwards until the springs are compressed and the bolt heads have gone
through the slotted holes of the SSL mounting bracket. Then Slide the complete fixture until the bolt
heads have fallen into the recessed groove of the mounting bracket.
• Check to make sure that the fixture is firmly in place.
• Insert the fixture input AC cable wire through the center hole of the SSL mounting bracket and
pass it through the side exiting hole of the mounting bracket.
I
II
INSTALLATION GUIDE
SSL - Spring Loaded Snap & Slide Surface Mounting
05
ILX3525 Series
LED Industrial Lighting
Loading...