Lightcomm Technology SPBTBRICK2 Users Manual
BTD16-E 快速指南卡,英文,355.6*139.7mm(折叠后尺寸44.45x139.7mm),材质:80g书纸，17LHZ064-QSG-EN-V1.1)
V2
FINAL
FOR PRINT
NS-SPBTBRICK2_17-0903_QSG_V2_EN.ai 1 2/1/2018 10:19:01 AM
QUICK SETUP GUIDE
Portable Speaker
with Power Bank
PACKAGE CONTENTS
• Bluetooth speaker • USB cable • Quick Setup Guide
FEATURES
• Stereo speakers
• Wirelessly stream from any Bluetooth device
• Rechargeable battery lasts up to 40 hours
• Integrated power bank charges your mobile devices
• Water-resistant body
Back view
Power button
Call button
Charging and
battery
power LED
Before using your new product, please read these instructions to prevent any damage.
Bluetooth
LED
Volume +/buttons
Power
bank
button
Micro USB
port
DC OUT
AUX in jack
IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this speaker near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers,
• Unplug this speaker during lightning storms or when unused for long
periods of time.
when the speaker has been damaged in any way, such as if the
speaker is dropped, exposed to liquids, or does not operate normally.
injury.
• Do not store the product in an extremely cold or warm environment.
• Never dismantle the product.
• Never let children play with the product.
• Do not expose the product to dampness or moisture.
• The product should not be exposed to dripping or splashing.
• Pay attention to the environmental aspects of battery disposal.
• Do not expose the speaker’s battery to excessive heat such as
• CAUTION: Danger of explosion if the battery is incorrectly placed. Do
not try to replace the battery.
Flat size (W×H): 14 × 5.5 in. (355.6 × 139.7 mm)
Final folded size: 1.75 × 5.5 in. (44.45 × 139.7 mm)
CHARGING YOUR SPEAKER
1 Open the port cover on the back of your speaker.
2 Connect the small end of the charging cable to the micro USB port on
the back of your speaker.
3 Connect the other end to a USB port on a USB wall charger or your
computer.
4 To check the battery level, press the (Power bank button).
Note
CHARGING LED
Blinks white
Solid white
DESCRIPTION
Charging
Fully charged
CHARGING AN EXTERNAL DEVICE
1 Open the port cover on the back of your speaker.
2 Plug one end of a USB cable into your external device and the other
end into the DC OUT port on your speaker.
3 Press and hold the (Power bank button). Your external device
charges.
CONNECTING AN AUDIO DEVICE
Bluetooth
1 Press and hold (power) to turn on your speaker. The Bluetooth LED
indicator blinks blue quickly and your speaker automatically enters
pairing mode.
2 Make sure that your Bluetooth device is within 33 ft. (10 m) of your
speaker.
3 Turn on your Bluetooth device, turn on Bluetooth, then enter pairing
mode. For more information, see the documentation that came with
your Bluetooth
device.
4 On your Bluetooth device, select NS-SPBTBRICK2. Your speaker
pairs with your Bluetooth device and the Bluetooth LED indicator
lights solid blue.
5 To disconnect, un-pair your Bluetooth device from your speaker.
OR
Press and hold (call) for three seconds on your speaker. Your
Bluetooth device loses connection automatically.
BLUETOOTH LED
Blinks blue
Solid blue
Blinks blue slowly
Audio cable
• Connect a 3.5 mm audio cable (not included) from your speaker’s
AUX jack to your audio device’s headphone/audio out jack.
DESCRIPTION
Speaker is in pairing mode
Speaker is connected to Bluetooth device
Speaker is connected to an AUX device
RECONNECTING TO A PAIRED DEVICE
When your speaker is not paired to a device, the LED blinks blue.
Your speaker loses the
Bluetooth connection if you...
Move the Bluetooth device out
of range.
Bluetooth device.
Connect your Bluetooth device
to another Bluetooth device.
Note: The Bluetooth range (33 ft./10 m) may be reduced if the wireless signal
has to pass through walls or othe
To reconnect...
Turn on your speaker. Your speaker searches
for the last connected Bluetooth device and
reconnects.
Make sure that your Bluetooth device is
within 33 feet of your speaker.
Turn on your Bluetooth device, then make
sure that Bluetooth is on.
Turn on Bluetooth on your Bluetooth device.
Disconnect your Bluetooth device from the
other Bluetooth device, then set your device
to pairing mode. Select NS-SPBTBRICK2 on
your Bluetooth device.
r obstructions.
NS-SPBTBRICK2_17-0903_QSG_V2_EN.ai 2 2/1/2018 10:19:06 AMNS-SPBTBRICK2_17-0903_QSG_V2_EN.ai 2 2/1/2018 10:19:06 AM
Notes:
• If a device does not automatically reconnect, you may need to reselect
NS-SPBTBRICK2 on your Bluetooth device.
• If you move your device out of range, it will lose Bluetooth connection until
you come back within range.
USING YOUR SPEAKER
1 Connect to your speaker with Bluetooth or an audio cable.
2 Play audio on your connected device.
3 Press + or - to adjust your speaker’s volume.
Note: Make sure that your connected device’s volume is set to at least 50%.
4 Use the controls on your connected device to control playback.
TAKING A PHONE CALL
The following functions are available when paired to a phone with
Bluetooth:
• Reject an incoming call: Press and hold (call).
• Answer an incoming call: Press (call).
• Switch audio between your speaker and phone during a call:
Press and hold (call).
• End the current call: Press (call).
• Redial the last dialed number: Press (call) twice.
RESETTING YOUR SPEAKER
• If you want to clear the list of paired devices or have trouble pairing,
press and hold (power) for eight seconds. Your speaker resets.
SPECIFICATIONS
• Dimensions (H × W × D):
7.48 × 3.1 × 2.8 in. (19 × 7.9 × 7.15 cm)
• Battery size: 4,400 mAh
• Wattage: 3W
• Power cord length: 11.8 in. (30 cm)
• Range: 33 ft. (10 m)
• Run time: 40 hours
• Charge time: 4.5 hours
• Weight: 1.08 lbs. (0.49 kg)
TROUBLESHOOTING LEGAL NOTICES
PROBLEM
No power
No sound or low volume
Cannot establish
Bluetooth connection
My Bluetooth device
keeps unpairing
“NS-SPBTBRICK2” does
not appear on my
Bluetooth device
Base speaker rattles
Poor sound quality
SOLUTION
• Make sure that your speaker’s battery is charged.
• Make sure that your speaker is turned on.
• Make sure that your Bluetooth device is turned on, Bluetooth is turned on,
and NS-SPBTBRICK2 is selected.
• Turn up the volume on your speaker and Bluetooth device. Make sure that
your Bluetooth device is not muted.
• Make sure that your speaker is not paired to another Bluetooth device.
• Make sure that your Bluetooth device is not paired to another Bluetooth
device.
• Shorten the distance between your speaker and your Bluetooth device.
• Make sure that your speaker is in pairing mode. Press and hold the
(call) button to re-enter pairing mode.
• Shorten the distance between your speaker and your Bluetooth device.
• Turn your devices o, then on. Re-pair your speaker and your Bluetooth
device.
• Make sure that your speaker is not paired to another Bluetooth device.
• Make sure that your speaker and Bluetooth device are both in pairing mode.
• Make sure that your Bluetooth device supports Bluetooth v4.0.
• Make sure that your Bluetooth device is not connected to any other device.
• Make sure that you have selected NS-SPBTBRICK2 on your Bluetooth
device.
• Make sure that AUX external device is not connected. Disconnect any audio
cables connected to your speaker’s AUX jack.
• Try resetting your speaker.
• Shorten the distance between your speaker and your Bluetooth device.
• If the battery on your Bluetooth device is low, recharge the battery.
• If the battery on your speaker is low, recharge the battery.
• Shorten the distance between your speaker and your Bluetooth device.
• Put your speaker into pairing mode, then refresh your list of Bluetooth
devices. For more information, see the documentation that came with your
Bluetooth device.
• Check your output device to see if you have a setting that adds bass.
• Move your speaker and Bluetooth device closer together.
• Try a dierent music source.
• Pair your speaker to a dierent device.
• Try changing the volume on your music source.
FCC
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
encouraged to try correct the interference by one or more of the
following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modications not expressly
approved by the party responsible for compliance could void your
authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modications to this equipment. Such modications could void
the user’s authority to operate the equipment.
RSS
IC Statement
This device complies with Industry Canada licence exempt RSS
standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicable s aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suiv antes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accept er
tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en comprom ettre le fonctionnement.
IFETEL Statement
La operación de este equipo está sujeta a las siguientes dos
condiciones: 1. es posible que este equipo o dispositivo no cause
interferencia perjudicial y 2. este equipo debe aceptar cualquier
interferencia, incluyendo la que pueda causar su propia operación no
deseada.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
1-877-467-4289 (U.S. and Canada)
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2018 Best Buy. All rights reserved.
Made in China
V2 ENGLISH 17-0903
Loading...