Liftaway LA-SDO1 Instruction Manual

1

Instruction Manual

LA-SDO1 Sectional garage door opener

INSTALLATION INSTRUCTIONS | OWNERS COPY

2

WARNING: It is vital for the safety of persons to follow all
instructions. Failure to comply with the installation instructions
and the safety warnings may result in serious personal injury
and/or property and opener damage. Please save these
instructions for future reference.

Sales Net Group Pty Ltd to the extent that such may be lawfully excluded hereby expressly disclaims all conditions or warranties,
statutory or otherwise which may be implied by laws as conditions or warranties of purchase of an LiftAway Pty Ltd LA-RDO1
Roller Door Opener. Sales Net Group Pty Ltd hereby further expressly excludes all or any liability for any injury, damage, cost,
expense or claim whatsoever suffered by any person as a result whether directly or indirectly from failure to install the LiftAway Pty
Ltd LA-RDO1 Roller Door Opener in accordance with these installation instructions.

3

TABLE OF CONTENTS

Safety Warnings................……………………………………………………………………….. 4

Basic function introduction……………………………………………………………………….. 6
Installation …………….………………………………………….…………………………….…. 7-12
Installation recommendations……………………………………………………………………13
Basic function setting and applying……………………………………………………………. 14-15
Photo beam connection……………………………………….…………………………….….. 16
Manual disengagement…………………………………………………………………………. 17
Packing List……………………………………………………………………………………… 18
Technical specifications…………………………………………………………………………. 18-19
Final notes….………………………………………..…………………………………………… 20
Important information for the user……………………………………………………………… 20
Warranty information …………….……………………………………………………………… 20

4

SAFETY WARNINGS

1. PLEASE READ CAREFULLY AND ADHERE TO ALL SAFETY AND INSTALLATION

RECOMMENDATIONS.

2. The opener is designed and manufactured to meet local regulations. The installer must be familiar with
local regulations required in respect of the installation of the opener.

3. Unqualified personnel or those persons, who do not know the occupational health and safety standards
being applicable to automatic gates and other doors, must in no circumstances carry out installations or
implement systems.

4. Persons who install or service the equipment without observing all the applicable safety standards will
be responsible for any damage, injury, cost and expense or claim whatsoever any person suffered as a
result of failure to install the system correctly and in accordance with the relevant safety standards and
installation manual whether directly or indirectly.

5. For additional safety we strongly recommend the inclusion of Photo Beam. Although the opener
incorporates a pressure sensitive Safety Obstruction Force system the addition of Photo Beam will
greatly enhance the operating safety of an automatic garage door and provide additional peace of mind.

6. Make sure that the garage door is fully open & stationary before driving in or out of the garage.

7. Make sure the garage door is fully closed & stationary before leaving.

8. Keep hands and loose clothing off the opener and garage door all the time.

9. The Safety Obstruction System is designed to work on STATIONARY objects only. Serious personal
injury, death and / or property damage may occur if the garage door comes into contact with a moving
object

10. This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the appliance.

11. Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authority or retailer for recycling advice.

12. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.

- WARNING: Important safety instructions. It is important for the safety of persons to follow all
instructions. Save these instructions.

5

- Do not allow children to play with door controls. Keep remote controls away from children.

- Watch the moving door and keep people away until the door is completely opened or closed.

- Take care when operating the manual release since an open door may fall rapidly due to weak or

broken springs, or being out of balance.

- Frequently examine the installation, in particular check cables, springs and mountings for signs
of wear, damage or imbalance. Do not use if repair or adjustment is needed since a fault in the
installation or an incorrectly balanced door may cause injury.

- Each month check that the drive reverses when the door contacts a 50 mm high object placed on
the floor. Adjust if necessary and recheck since an incorrect adjustment may present a hazard,
for drives incorporating an entrapment protection system depending on contact with the bottom
edge of the door.

- Disconnect the supply when cleaning or carrying out other maintenance.

- The installation instructions shall include details for the installation of the drive and its

associated components.

6

Basic Function Introduction

1. Soft start, soft stop

2. Minimize start-up load on garage door opener and garage door

3. Opening & closing force self-learning

4. Overloading force detecting, the door will reverse more than 15 cm automatically when it is

overloaded when closing and will stop when it is overloaded when opening.

5. Safety resistance adjustable, with a wide range, sensitive and reliable.

6. Low-voltage protection, the process will not perform any action of opening and closing when voltage

is too low, door panel and controller won’t be damaged.

7. Rolling code frequency

8. Auto -closing feature.

a. NOTE: It is compulsory to install a photo electric beam if auto close ode is

selected, otherwise the door may cause personal injury or damage to
property. Auto close time is adjustable.

9. Metal chassis

10. Backup battery interface available, in case of power failure.

11. Wall switch interface available.

12. O/S/C button B, make adjustments, maintenance and emergency opening or closing easier.