Lifetime 60013 Owner\'s Manual

OUTDOOR STORAGE

MODEL N° 60013

OWNER’S MANUAL

Keep this Product ID Number and use when contacting Customer Service:

REGISTER YOUR PRODUCT ONLINE AT WWW.LIFETIME.COM

At Lifetime, we are committed to providing innovative and quality products. While registering, you will have the opportunity to give us your feedback. Your input is valuable to us.

• You can also opt in to receive new product notiﬁ cations or promotions.

• In the unlikely event of a product recall or safety modiﬁ cation, your registration provides the information we need to notify you

directly.

• Registration is fast, easy, and completely voluntary.

LIFETIME’S PROMISE TO YOU:

Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that Lifetime will not sell or provide your personal data to other third parties, or allow them to use your personal data for their own purposes.

We invite you to read our privacy policy at www.lifetime.com

REGISTER today!

**U.S. and Canada customers ONLY**

IF ASSISTANCE IS NEEDED,

DO NOT CONTACT THE STORE!

CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865

HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)

**For customers outside the U.S. or Canada, please contact the store for assistance.**

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY

To ensure safety, do not attempt to assemble this product without following the instructions carefully. Check entire box and inside all packing material for parts and/or additional instruction material. Before beginning assembly, read the instructions and identify parts using the hardware identiﬁ er and parts list in this document. Proper and complete assembly, use and supervision are essential to reduce the risk of accident or injury.

**Call, or visit our Web site for Saturday hours**

SAFETY INSTRUCTIONS

DAMAGE AND WILL VOID WARRANTY.

• Do not use or store hot objects such as grills, blowtorches, welding equipment, etc. near the product.

• If using a ladder during assembly, use extreme caution.

• Two capable adults are required for assembly. (It is also recommended that a third adult function as an instruction reader.)

Most injuries are caused by misuse and/or not following instructions. Use caution when using this product.

INSTRUCTION #1051598 C

3/26/2012

2



BEFORE BEGINNING ASSEMBLY

Keep the hardware bags and their contents separate. If any parts are missing, call our Customer Service Department.

TOOLS REQUIRED FOR THIS ASSEMBLY

Phillips Screwdriver Safety Glasses

(1 pair for each

(x1)

person)

3

ASSEMBLY GUIDES

Refer to the following areas throughout the instructions

to assist in the assembly process:

This area is located at the top, left-hand corner of the page and indicates which tools and hardware are needed to complete the assembly steps on a page.

This area is located at the top, right-hand corner of the page and shows an image of the product with shaded parts indicating which section is being assembled.

This area is usually located in the bottom, left-hand corner of a step and indicates that special attention is needed to perform a particular part of a step.

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

#

SEC

Note:

!

These areas are usually located in the bottom, right-hand corner of a step and indicate that damage to the product or serious injury may occur if the caution or warning is not heeded.

Throughout the Parts & Hardware List, Part & Hardware Identiﬁ ers, and instructions are three-letter IDs. These IDs are below the images of the parts and hardware to help you locate and identify the parts and hardware during assembly. These IDs are not necessarily on the parts themselves.

CAUTION

WARNING

ADZ (x10)

1/4” x 5/8” Pan-Head Screw

4

PARTS & HARDWARE LIST

ID Description Quantity

Main Part

AYG Tool Corral 1

AYL Tool Corral Installation Hardware

ADZ 1/4” x 5/8” Phillips Pan-Head Screw 2 ADX #10 x 1/2” Phillips Pan-Head Screw 8

HARDWARE IDENTIFIER

TOOL CORRAL INSTALLATION HARDWARE [AYL]

Hardware shown at actual size

ADZ (x2) 1/4" x 5/8" Phillips Pan-Head Screw

ADX (x8) #10 x 1/2" Phillips Pan-Head Screw

PARTS IDENTIFIER

Part shown at 15% of actual size

AYG (x1)

Tool Corral

Note: Throughout the Parts & Hardware List, Part & Hardware Identiﬁers, and instructions are threeletter IDs. These IDs are below the images of the parts and hardware to help you locate and identify

!

the parts and hardware during assembly. These IDs are not necessarily on the parts themselves.

5

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

10-YEAR LIMITED FACTORY WARRANTY

THE MANUFACTURER RESERVES THE RIGHT TO MAKE SUBSTITUTIONS TO WARRANTY CLAIMS IF PARTS ARE UNAVAILABLE OR OBSOLETE.

1. Lifetime outdoor sheds are warranted to the original purchaser to be free from defects in material or workmanship for a period of ten years from the date of original retail purchase. The word “defects” is deﬁ ned as imperfections that impair the use of the product. Defects resulting from misuse, abuse or negligence will void this warranty. This warranty

does not cover defects due to improper installation, alteration or accident. This warranty does not cover damage caused

by vandalism, rusting, “acts of nature” or any other event beyond the control of the manufacturer.

2. This warranty is nontransferable and is expressly limited to the repair or replacement of defective product. If the product is defective within the terms of this warranty, Lifetime Products, Inc. will repair or replace defective parts at

no cost to the purchaser. Shipping charges to and from the factory or distribution center are not covered and are the responsibility of the purchaser. Labor charges and related expenses for removal, installation or replacement of the shed or its components are not covered under this warranty.

3. This warranty does not cover scratching or scufﬁ ng of the product that may result from normal usage. In addition,

defects resulting from intentional damage, negligence, unreasonable use or hanging from the truss will void this warranty.

4. Liability for incidental or consequential damages is excluded to the extent permitted by law. While every attempt is made to embody the highest degree of safety in all equipment, freedom from injury cannot be guaranteed. The user assumes all risk of injury resulting from the use of this product. All merchandise is sold on this condition, and no

representative of the company may waive or change this policy.

5. This product is not intended for institutional or commercial use; Lifetime Products, Inc. does not assume any liability for such use. Institutional or commercial use will void the warranty.

6. This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of merchantability

or ﬁ tness for use to extent permitted by Federal and state law. Neither Lifetime Products, Inc., nor any representative

assumes any other liability in connection with this product. This warranty gives you speciﬁ c legal rights, and you may also have other rights which vary from state to state.

www.lifetime.com

LIFETIME OUTDOOR SHED EQUIPMENT

PLEASE INCLUDE YOUR DATED SALES RECEIPT AND PHOTOGRAPHS OF DAMAGED PARTS.

REPORT PRODUCT DEFECTS IN WRITING TO: Lifetime Products, Inc., PO Box 160010 Clearﬁ eld, UT 84016-0010 or call 1-800-225-3865 M-F 7 a.m. to 5 p.m. MST.

REGISTER YOUR PRODUCT FOR QUICKER CUSTOMER SERVICE.

Visit www.lifetime.com or call 1-800-225-3865 to register your product today.

FOR INTERNATIONAL WARRANTY CLAIMS:

All warranty claims must be accompanied by a sales receipt. Report all warranty claims in writing to your regional sales

support representative. Please include your dated sales receipt and photographs of damaged parts.

To Identify the representative for your region — Please visit: www.lifetime.com/international

1

SEC

1.1

TOOL CORRAL INSTALLATION

The Tool Corral (AYG) can be placed in either the Left, Front or Right, Rear Corners of the Shed. Locate the screw bosses about one third of the way up the Panel and hold the Tool Corral so the holes in the ends line up with the screw bosses in the Wall Panel.

ADX (x8)

ADZ (x2)

Note: The large screw hole on each end should be on top.

!

SEC

1.2

Attach both ends of the Tool Corral to the Corner Panel using the required hardware.

ADX

ADZ

AYG

ADX

6