04/21/2008
Copy
®
VISIT THE LIFETIME WEB SITE:
WWW.LIFETIME.COM
** Do Not Contact the Store **
For Assistance, including missing or broken parts,
Call Customer Service at:
1 (800) 225-3865
30” Shed Extension Kit 11’ Sheds
MODEL #0125
ASSEMBLY
INSTRUCTIONS AND
OWNER’S MANUAL
Save this instruction in the event you must contact the manufacturer for replacement parts.
INSTRUCTION #1036820
**A MINIMUM OF TWO ADULTS ARE REQUIRED FOR ASSEMBLY**
BEFORE BEGINNING ASSEMBLY
Identify and inventory all parts using the checklist boxes on the Parts List. Keep the
hardware bags and their contents separate. If any parts are missing, call our Customer
Service Department.
SAFETY INSTRUCTIONS
Failure to follow these safety instructions may result in serious injury or property damage. Proper and complete
assembly, use and supervision is essential for proper operation and to reduce the risk of accident or injury. A high probability
of serious injury exists if this display is not installed, maintained, or operated properly. • If using a ladder during assembly,
use extreme caution. Follow all warnings and cautions on the ladder carefully. • 2 people are required for assembly. •
Misuse could result in system failure. • If technical assistance is required, contact the manufacturer.
Most injuries are caused by misuse and/or failure to follow instructions.
PARTS LIST
AA 1028035 Center Roof Cap (1021070)* 1
AB 1019503 Gutter Channel 2
AC 1007977 Wall Support Channel 2
AD 1007988 Truss Channel 1
AE 1007996 Inner Roof Panel (1000496)* 2
AF 1007997 Wall Panel (1000272)* 2
AJ 1008000 Inner Floor Panel (1000463)* 2
AK 1008001 Roof Support Strip 4
AM 1020423 Truss Support Strip 2
Shed Parts Box [1019238]
GA 1010271 1/2” Foam Cube 4
Skylight Hardware Bag [1011616] 1
LA BW01200 #10-1” Fender Washer 7
LB 1010132 #10 x 5/8” Pan Head Screw 7
Truss Extension Hardware Bag [1016014] 1
FA 1009117 Floor Bracket 2
FB 300072 1/4” x 1 1/2” Hex Bolt 11
FC BN00300 1/4” Cap Nut 11
FD 1012933 Center Gutter Connector 1
Shed Screw Hardware Bag [1011615] 1
SS BS07500 1/4” x 5/8” Screw 60
FA
LA
FB
FC
LB
SS
* The number in Parentheses
indicates the number molded into the
plastic part.
FD
GA
Tools and Materials Required for
Assembly
(Not Included)
1. 7/16” Wrenches (2)
2. 3/8” Wrenches (2)
3. #2 Phillips screwdriver or
Electric drill with phillips head
HARDWARE IS NOT ACTUAL SIZE
(unless otherwise indicated)
AA
AJ
AE
AF
AK
AM
AB
AC
AD
Site Selection
a. This extension kit adds another 30” to the length of your shed. Before beginning expansion of your shed be
sure that your site can accommodate the new size.
If you are Extending an Existing Shed
1. See “Option 2” instructions on page 11. If you have not yet assembled your shed, use the
“Option 1” instructions on the next page.
3
Option 1: Add Extension Kit During Shed Assembly
1. Check contents of boxes and compare to parts listed on the Parts List.
2. Follow instructions that came with your shed, but when you come to the following sections of
your Owner’s Manual assemble the additional fl oor, wall, window and truss parts that are included
in this kit.
Site Selection
Opt. 1.1: Add 30” to the length of your site’s wooden platform (shown) or cement platform; the width will remain
the same. This may require the use of additional lumber or other materials.
Note: Floor studs are all 16” on center with one at 14” on center. Refer to Site Selection & Platform Instructions
in Owner’s Manual.
16”
14”
4
Assemble Floor
Note: Refer to the corresponding section in your Owner’s Manual for more specifi c instructions.
Opt. 1.2: Fit together the two Inner Floor Panel extensions (AJ).
AJ
AJ
Opt. 1.3: Connect the Inner Floor Panel extensions (AJ) to the other Inner Floor Panels and fi nish off by
connecting the last two Outer Floor Panels that came with your shed.
5
Assemble Wall (Right or Left)
Note: Refer to the corresponding section in your Owner’s Manual for more specifi c instructions.
Opt. 1.4: Add the two Wall Panel (AF) extensions as you attach the other Wall Panels around the shed.
Assemble Truss Frames
Note: Refer to the corresponding section in your Owner’s Manual for more specifi c instructions.
Opt. 1.5: Fit two Truss Support Strips (AM) together. Bolt Truss Support Strips, Center Gutter Connector
(FD) and two Gutter Channels (AB). Refer to the Owner’s Manual that came with your shed when assembling
other truss frames.
AM
AM
FB
FD
AB
Finger Tighten Hardware
FC
WARNING
AB
AM
Do not overtighten the Cap Nut. If the end of
the Bolt breaks through the plastic cap, call our
Customer Service Department.
6
Loading...