Lifestyler 831283600 Owner’s Manual

USER'S MANUAL
Model No. 831.283600
Model
Number
Decal
F-" x EZ F_ _C. i S E£"
EQUIPMENT
HELPLINE!
SEARS, ROEBUCK AND CO.,
HOFFMAN ESTATES, IL 60179
www.weslo.com
new products, prizes,
fitness tips, and much more!
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS ............................................................. 2
BEFORE YOU BEGIN ................................................................... 3
ASSEMBLY ........................................................................... 4
HOW TO OPERATE THE STEPPER ........................................................ 6
MAINTENANCE AND TROUBLESHOOTING .................................................. 7
CONDITIONING GUIDELINES ............................................................. 8
PART LIST ........................................................................... 10
EXPLODED DRAWING ................................................................. 11
ORDERING REPLACEMENT PARTS ................................................ Back Cover
FULL 90 DAY WARRANTY ....................................................... Back Cover
tions before using the stepper,
1. Read all instructions in th s manual before . do not wear loose c!othing tl_at could become aescrmea in this manual. SROeSlur IUULpfUL_UUII. : ::
2
BEFORE YOU BEGIN
Congratulations for selectingthe new WESLO* ALTA
150 stepper. Stepping isone of the most effective exercises for increasing cardiovascular fitness, building endurance, and toning the body. The ALTA 150 step-
per offers a selection of features designed to let you enjoy this healthful exercise in the convenience and
privacy of your home.
For your benefit, read this manual carefully before you use the stepper, If you have questions after
Misuseoflhispr_uct mayresultm senous
injury.
Readuser'smanual andfollowall warnings
andoperatinginstruc- tionspriorto use.
, Do netallow children onoraroundmachine.
Replacelabelif damaged,illegible,or
removed.
reading the manual, please call our toll-free HELPLiNE at 1-800-736-6879, Monday through
Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays). To help us assist you, please note the prod- uct model number before calling. The model number
is 831.283600.
Before reading further, please familiarize yourself with the parts that are labeled in the drawing below.
Handlebar
Console
Adjustment Knob
FRONT
Frame Knob
Resistance Collar
Resistance Cylinder
Pedal
REAR
RIGHT SIDE
ASSEMBLY
Place all parts ofthe stepper in a cleared area and remove the packing materials, Do not dispose of the packing materials until assembly is completed. Note: Some small parts may have been pre-sttached for shipping. If a part is not in the parts hag, check to see if it has been pre-attached.
Assembly requires only the included allen wrench.
1. Raise the Stabilizer Frame (23) and the Frame (29)
until they meet. Refer to the inset drawing. Set the Stabilizer Frame into the saddle on the Frame. Attach the Stabilizer Frame to the Frame with an M8 Curve
Washer (2} and the Frame Knob (36).
23
36 2 29
2. While holding the Upright (27) near the Frame (29) as shown, connect the Reed Switch Wire (34) to the Upper Wire (37). Attach the Upright to the Frame with
three M8 Curve Washers (2), three M8 Spring Washers (9), and three M8 x 15ram Screws (3).
2
34_
2
4
Loading...
+ 8 hidden pages