Lifestyler 499297700 Owner’s Manual

Model No. 499.297700

. Warranty , Assembly

° Operation and Adjustments ° Maintenance and Storage

LIFESTYLER

7.0

• Conditioning Guidelines ° Part Ordering Information

f,l,i

Owner's Manual

CAUTION Read all instructions car÷_ully before using this product. Retain this o_,,- er's

manual for future reference.

k_...P.ah No. 98_1:73-T 5/92 SOLD BY SEARS; ROEBUCK _ND CO., CHICAGO, IL 60684

L, TA LE OF CONTENTS

Safety Ins'lructions ..........................................................................................._.. ........ ..............3

Grounding instructions ................................................................................................................... 3

Introduction ........................................................................................... :...................................................4

Assembly Ir_structions .........................................................................................................................5

Electronic Monitor Instructions .................................................................................................. 6-7

Use Instructions ............................................................................................................................. 8

Adjustments ................................................................................................................................. 9-10

Trouble Shooting Chart ....................................................................................................................11

Maintenar .,,ce ..................................................................................................................................... 12

Parts Ust ............................................................................................................................................ 13

Exploded Parts Drawing ........................................................................................................ 14-15

Service and Repair Parts ............................................................................................................. 16

FULL 90 DAY WARRANTY ON PARTS

For 90 days from the date of purchase, when proper assembly and maintenance i:xocedures detailed in the Owneds Manual are lollowed, Sears will, free of charge, repair or replace and install a replacement part tor any defective part, when the Lifestyler 70 Treadmill is used in a normal manner

This warranty does not apply when the Lifestyler 7 0 T_eadmill is used for commercial or rental purposes,

SERVICE IS AVAILABLE BY SIMPLY CONTACTING YOUR NEAREST SEARS SERVICE CENTER/

DEPARTMENT tN THE UNITED STATES.

This warTanty gives you specific legal dghts, and you may also have other rights which vary from slate to slate

Flat Washer

SEARS, ROEBUCK AND CO., DEPT. 731CR*W, CHICAGO, IL 60684

HARDWARE ILLUSTRATION

_ .... lflflflflIflltlilil

Lock Washer

_!_1,

I. 1

2" 3" 4"

1........ I t-F......

Hex Head Bolt

Hardware Length Scale

3/16"

Hardware Diameter Scale

!/4" 5116"

IMPORTANT.SAFETY INSTRUCTUONS

WHEN USING AN ELECTRICAL APPLIANCE BASIC-PRECAUTION SHOULD ALWAYS BE

:_FOLLOWED INCLUDING _TILEFOLLOW_ING;

READ ALL INSTRUCTIONS CAREFULLY BEFORE'USING THE TREADMILL

DANGER: Toreducethe risk of electric shock:

always unplug the Treadmill from the electrical outlet immediately after using and before cleaning or servicing.

WARNING: To red,Jce the risk of bums, fire, electric

shock or injury to person:

1, Connect the Treadmill to a property grounded

outlet only See Grounding Instructions.,

2. The Treadmill should never be left unattended when plugged in.. Unplug from the outletwhen rot in use,

and before putting on or taking off parts.

3 Children, invalids or disabled persons should not

use the Treadmill without a qualified person in attendance=

4. Use the Treadmili only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.

SAVE THESE INSTRUCTIONS

Never operate the Treadmill if it has a (iamaged cord or plug. ffif is not working properly, or if it

has been dropped or damaged, return the appliance to a service center for examination

and repair

Keep the cord away from heated surlaces

Never operate the Treadmill with the air openings

blocked. Keep the air openings free from any foreign objects.

Never drop or insert any object into any opening

9,,

Do not use outdoors.

Do not operate where aerosol (spray) products are

being used or where oxygen is being administered..

To disconnect, turn all controls to the off position, then remove plug from outlet.

GROUNDING INSTRUCTIONS

This product mustbe grounded° IfIt should malfunction or breakdown, grounding provides a path of least resistance for electric shock., Thls product Is equipped with a cord

having an equipment-grounding conductor and a ground-

ing plug. The plug must be. PlUgged In{b an appropriate outlet that ts propedy in-.stali_l andgmunded inaccordance with al! Ioqal codes andordinances.

DANGER: Improper connection ol the equipment

grounding conductor can result in a risk of electric shock, Chock with a qualified electrician or serviceman if you ai'e in doubt as towhether the product Is properly grounded° Do rot modify the plug provided with the product, If it will not fit the outlet, have a proper outlet installed by a qualified

electrician.

T_s product is for use on a nominal 120-volt 15 amp

minimum circuitand has agrounding plug that looks like the

plug illustrated below. Make sure that the product is connected to an ouUet having the same configuration as

the plug. No adapter should be used With this product.

!NTFIO

Thank you for purchasing a SEARS LIFESTYLER Treadmill, which allowsyou to exercise inthe convenience and privacy of

your home. This ma_al ts designed to assist you in the assembly and operation ofthis treadm!W.

Please read this manual completely before Initial us_ of the treadmill.

UCTION

The model number and the serial number ofyour Treadmill can be found on the front of the Treadmill frame as seen in

Figure 1. Please refer to this modefand serial number in all communications regarding this pm,x_ct. To assist you in

PART identification, please review ttm exploded view draw- ing and the PARTS LIST in this _anual before calling.

MODEL NO. SERIAL NO

To help familiarize yourself with the PARTS and descdptton-.sin this mar_al please review the

identification drawing in Figure 2.

MONITOR

SIDE HANDRAIL

END CAPS

WALKING BELT

' MOTOR coVER

WALKING BOARD

ASSEMBLY INSTRUG IONS

Remove tl'ie _i_a_d, mill from carton and place in a clear area_i_;_-_._.}_or with the help of a second persor

................... packing matenals unttl t_e_,:Tr.e._dmtli has been fullv assembled an,Do not discard_.t_:_ton or-_i'ny 6f the " " " "" '__ "_......' ' '

tested.

Locate the HARDWARE BAG containing:

-1 Hex Wrencn ¥!a" (72) 3 Hex Head Boll s/,_. 18 x 3 "(40) 4 Hex Head Bolt ¼ -20 x 2" (70) 3 Flatw_sher'SA8"(34)

4 ¼ "Lockwasher (21) 2 Nylock Nut 6A_- 18 (22) 1 5As=Lockwasher (29) 1 Spacer (53)

STEP "J

° With the upright ddWrl, insert the plastic spacer

into the end ofthe 2" x 4=upright assembly (See figure 3). Lining,!he spacer up with the hole,

insert the %6 - )8 x 3 " hex head bolt, %_ "

lockwasher and %6 " flatwasher through the

upright hole loosely. Carefully raise the upright assembly to the vertical position and tighten the bolt into the factory pre_assembled nut,

Figure 3 I

STEP 2

, Position the right handrail as shown in Figure 4.

1- The handrail bolts to the bottom of the console

plate. Using the 2nd and 4th holes, bolt to the console plate using two _ - 20 x 2" hex

head bolts and two ¼" Iockwashers.

. Align the hole in the lower end of tl-_ehandrailwith

the hole on the side of the frame and insert a %_

- 18 x 3 "hex head bolt through the parts and tighten using a %e - 1,8 nylock nut and %6 "

flatwasher.

= Tighten the upper handrail bolts that were

previously assembled. " "

o Repeat the Step 2 for the left side handrail

assembly.

= NOTE" ffhandrailassemblyisdifficult, insertthe

lower hardware first, and then insert the upper hardware.

,=STEP3

. Carefultymrr_vetheprotectivebackingfromthe _e"

decal and install on the front of th,e_motorcover as shown in Figure 4.

• '_/_6-18x3" :.i :,\

o o o o ] HexHeadBott

• 4321

¼" Lockwasher

_,_-20 x 2"

HexHead Bolt

,::Flatwasher

Spacer 0

Handfaia l Figure 4 J

%6- 1B

Nut

_/_(_-18 x 3"

Head Bolt _/)_F.ta_"

+ 11 hidden pages