Lifestyler 142288000 Owner’s Manual

SEARS

Lif__gl_r ® 2000

Bicycle Exerciser Model No. 142.288000

Serial No. write number in space above for future reference.

QUESTIONS? Call Sears Exercise

Equipment Helpline

1-800-736-6879

CAUTION: Before using this Bicycle Exerciser,

read this manual and follow all its Safety Rules and Operating

Instructions.

Sears, Roebuck and Co., Hoffman Estates. IL 60179 U.S.A. Vist our Sears Website:www.sears. corn

• Safety

• Installation

• Operation

• Maintenance

• Parts

SAFETY PRECAUTIONS

To avoid accidents or personal injury, be sure to read these safety precautions.

• Do not allow children to play on or around your air bike.

• Do not place head, arms or legs between handlebars when in use.

• Always wear rubber soled shoes such as tennis shoes when using your unit.

• Do not wear loose, baggy clothing that could become entangled, in moving

parts.

• Use your unit only on a level surface.

• Before using the Lifestyler 2000, make sure that it is properly assembled and

tightened following the assembling instructions contained in this manual.

• The Lifestyler 2000 should not be used by persons weighing over 250 pounds.

• Always check to see that the seat is securely fastened before use.

• Do not ride the Lifestyler 2000 standing up.

• Do not position your Lifestyler 2000 on loose rugs or uneven surfaces.

• Follow your doctor's recommendations in developing your personal fitness program.

Always choose the workout which best fits your physical strength and flexibility level.

Know your limits and train within them.Always use common sense when exercising.

Exploded Diagram

_22

8 1312

[213

ASSEMBLY / INSTALLATION INSTRUCTION

IMPORTANT

• Please read instructions carefully before assembling.

• Make sure all parts are removed from carton and identified

before starting assembly.

• Check part size, quantity and the their relation to the assembly.

• Tighten screw and bolts as directed.

Step 1. Place front foot (2) into saddle bracket at the front of main

frame(l).

Align the holes in the front foot(2) with the holes in the bracket and put 2carriage bolts(16)through the holes.

Place 2flat washers(17)on bolts and screw on 2capnuts(18) and tighten.

FIGURE 1.

+ 8 hidden pages