LifeSpan C2, R2 Owner's Manual

Owners Manual

Version 1.0

page

Welcome to LifeSpan . . . . . . . . . . . . . . . . . . . . . . . . .1

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Limited Home Use Warranty . . . . . . . . . . . . . . . . . . . .4

Important Safety Precautions . . . . . . . . . . . . . . . . . . .5

Getting Fit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . .8

Stationary Cycle Operations . . . . . . . . . . . . . . . . . . .18

Congratulations on the purchase of your new LifeSpan
stationary cycle. To ensure safe and trouble free operation,
we suggest that you read this Owners Manual and follow
its recommendations.

We all know that exercise is a key component to achieving the level of Health and Wellness that all

of us desire. Regular activity prevents the development of numerous diseases, helps to reduce

stress, leads to an improved self image, weight loss and increased energy levels.

We also know that in our modern society of fast food, automation and convenience, as a society we

are becoming increasingly sedentary and overweight. At LifeSpan we are working to promote

regular activity. Whether this activity is through physical education in our school systems, sports,

outdoor recreation, or exercising indoors, we believe that increased activity will greatly improve the

health of the average individual in our society.

We designed the LifeSpan product line specifically for people who want to make exercise a part of

their lifestyle. To do this we know that you need a product that is easy to use, comfortable and

built to last.

Easy to Use - means an intuitive easy to read display console, simple adjustments to obtain

proper positioning for each workout, and convenient locations for resistance adjustments, water

bottle holders and storage trays.

Comfortable - includes oversized seats with thick cushioning and built in lumbar support, counter

balanced pedals with a large surface area so they are easy on the feet, and ergonomically correct

positioning that’s easy on the knees, hips and back.

Durability - at the center of any stationary exercise cycle is the drive system - the flywheel, pulleys,

belt, cranks and pedals. The quality and durability of the drive system is only as good as the

weakest component in this system.

The drive system on the C2 and R2 starts with a flywheel that is a full 12” in diameter,

weighs approximately 19 pounds, and places the conductive ring on the outer circumference

of the flywheel. These factors are all critical to obtain a smooth pedal stroke even with high

levels of resistance. The flywheel is complemented by a 5 grove poly V belt, belt tension pulley

that can be adjusted from the outside of the bike, sealed bearings, 3 piece crank set and

counterbalanced pedals. All of these components together ensure a smooth and durable

drive system.

1

You can be assured that there is no better value on the market when it comes to Ease of Use,

Comfort and Durability.

Before assembly and operation, please read this Owners Manual. It includes basic information on

starting an exercise program, and safety tips that will assist you in reaching your goals for a

healthy lifestyle.

To keep your stationary cycle in optimal condition, please pay attention to the Operations section of

this manual and remember that some kinds of service should only be performed by a qualified

service technician. If service is required, please contact your authorized LifeSpan Retailer. If a

question or problem arises that cannot be answered by your retailer, contact us:

PCE Health and Fitness

PO Box 981316

Park City, Utah 84098 –1316

Phone: [phone]

Fax: [phone]

www.pcefitness.com

Neither PCE Health and Fitness nor its representatives can accept responsibility for any damage

or injury incurred as a result of information presented in the manual except under the terms of

the product warranty.

2

console

resistance adjustment knob

transport wheels

levelers

oversized seat with lumbar support

fore and aft adjustment

Console: Oversized LCD Display Console with Storage Tray.

Readouts include Time, Heart Rate, Calories, Speed, and Distance.

Heart Rate: Contact

Dimensions: R2: 68 L * 27 W * 45 H

C2: 42 L * 24 W * 53 H

Product Weight: R2: 133 pounds

C2: 101 pounds

Flywheel Size: 12” Diameter/19 lbs. Balanced

Resistance: Circumference ECB Permanent Magnets with Manual Adjustment

Tension Control: Indexed Knob with 15 Levels

Belt: 5 Grove Poly V

Pedals: Self-Balancing with Easy Adjust Straps

Power: 2 AA Batteries

Frame: Heavy Gauge Steel

Seat: R2: Spine smart design with Integrated Lumbar Support and

Multi-Position Seat Assembly.

C2: Oversized Seat with level adjustment

Maximum User Weight: 300 LBS

3

The LifeSpan R2 and C2 come with the following limited warranty, which applies only to the use of

these cycles in the home, for residential, non-commercial purposes:

• Frame: Lifetime

• Parts: 3 years

• Labor: 1 year

PCE Health and Fitness warrants that the equipment it manufacturers is free from defects in

material and workmanship under normal use and service. The periods above are based on the

date of purchase. During these periods, PCE Health and Fitness will repair or replace any

defective part. Free labor is included for the first year.

If within the time frames specified above, any part of the LifeSpan exercise cycle fails to operate

properly contact your authorized LifeSpan retailer to report the problem. All labor shall be supplied

by the authorized retailer that sold your product and the product must be located within

that retailer’s service area. If you are unable to reach the dealer that you purchased the product

from, contact PCE Health and Fitness at our web site, www.pcefitness.com or at [phone].

PCE Health and Fitness reserves the right to make changes and improvements in our products

without incurring any obligations to similarly alter any product purchased. In order to insure our

product warranty and to ensure the safe and efficient operation of your cycle, only authorized

parts can be used. The warranty is void if any parts other than those provided by PCE Health and

Fitness are used.

Exclusions and Limitations

• This warranty does not apply to any defects caused by negligence, misuse, improper

assembly or maintenance, accident, or an "act of god".

• This warranty does not apply to discoloration of paint or plastics

• PCE Health and Fitness shall not be responsible for incidental or consequential damages.

• This warranty is nontransferable from the original owner.

Registration

You must register your LifeSpan product before a warranty claim can be processed.

To complete your registration card online, go to www.pcefitness.com and fill out

the registration card online or fill out the warranty card provided with your cycle

and mail it today. Registration Cards must be completed and sent to PCE Fitness

within 30 days of purchase to activate the Product Warranty on your LifeSpan equipment.

Product Warranties are not valid unless properly completed and sent to PCE Fitness

within this 30 day period.

4

When using equipment, basic precautions should always be followed, including:

• Never drop or insert any object into any opening.

• Never operate your Stationary Cycle if it has been damaged or even partially submersed in water.

• Do not use outdoors, near swimming pools or in areas of high humidity.

• Keep the stationary cycle on a solid, level surface.

• Use this exercise product for its intended use as described in this Owners Manual.

• Do not use attachments that are not recommended by PCE Health and Fitness.

• Were shoes with rubber or high traction soles.

Do not use shoes with heels, leather soles, cleats or spikes.

• Keep hands and feet away from all moving parts.

Children and Pets

• Keep children off your stationary cycle at all times.

• When in use, young children and pets should be kept at least 10 feet away.

Other Safety Tips

• Always consult a physician before beginning this or any exercise program.

• If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising

immediately and consult your physician before continuing.

Note: Read ALL instructions before using your LifeSpan stationary cycle.

Save These Instructions

5

Cardiovascular endurance is the most important component of physical fitness. There are two

types of cardiovascular endurance, these are interval training and steady state training.

Interval training varies the amount of effort required during the workout. On the LifeSpan

R2 and C2 this means that you adjust the resistance level during your workout to manually

control the effort required. You may choose to vary the resistance based upon your perceived

effort level or based upon your heart rate.

Steady state training keeps the resistance the same during the course of the workout.

Regardless of your personal fitness goals and the program that you pursue, warming up

and cooling down before and after you workout will help reduce the risk of injury and

improve the effectiveness of your workout.

Warming up is important to bring your body from its normal level of activity to a state where

it is ready to exercise by increasing the flow of blood to the muscle to raise the muscle

temperature. This will increase the muscle elasticity and protect the joints. The warm up

period also helps to mentally prepare you for your workout.

Warmups should be done at a low intensity level and last for at least five minutes.

Cooling down after your workout is required to gradually bring your cardiovascular system

down to its normal level.

Follow your workout with at least 10 minutes of stretching. Focus on the major muscle

groups of the lower extremity. When stretching, stretch the muscle until you feel gentle

tension, hold it and wait for the tension to relax while the muscle elongates, stretch the

muscle again until you feel gentle tension.

Do not bounce when you stretch, bouncing is not an effective approach to stretching and can

lead to injury.

The three components of a successful cardiovascular exercise program are:

• Frequency

• Intensity

• Time

6

In terms of frequency, you should try and exercise at least three times per week and no more

than five times per week. Preferably you should try to exercise every other day to give your

body a days rest in-between workouts.

The intensity of each workout refers to how hard you feel your working and can be measured by

your heart rate. Depending on your fitness goals, exercise between 55% and 90% of your

maximum heart rate. A simple way of estimating your maximum heart rate is by subtracting

your age from 220. As a general rule of thumb, if your fitness objective is to Lose Weight, you

will want to keep your heart rate between 60% and 75% of your maximum heart rate. If your

objective is improved aerobic performance keep your heart rate between 75% and 85% of

your maximum heart rate.

To achieve benefits from your workout, your workout time should be at least 20 minutes per

session. If you are trying to lose weight focus on longer (more than 30 minutes) less intense

workouts, to improve your aerobic performance focus on shorter more intense workouts.

As a rule of thumb when your exercising, if your having trouble completing a sentence, you are

working too hard. When exercising, you should be able to speak freely without gasping for air.

7

60%

75%

85%

100%

Increased Performance Range

Aerobic Training Range

Weight Loss Training Range

Low Intensity

20 25 30 35 40 45 50 55 60 65

AGE

200200

170170

150150

120120

195195

166166

146146

117117

190190

162162

143143

114114

185185

157157

139139

111111

180180

153153

135135

108108

175175

149149

131131

105105

170170

145145

128128

102102

165165

140140

124124

9999

160160

136136

120120

9696

155155

132132

116116

9393

TARGET HEART RATE CHART

Since your stationary cycle is a heavy piece of equipment, we recommend that you use 2 people
to complete the assembly, as some of the parts need to be held in place while the electrical
connectors are pushed together.

Prior to starting the assembly process take all of the parts out of the box, cut zip ties, remove all
plastic bags, and lay them out on the floor to become familiar with the components.

R2 RECUMBENT ASSEMBLY

Step 1: Front Base Assembly

Parts Required

Main Frame
Front Base

Hardware Required

Part # Size Description Quantity

A-1 M10 * 90 Dome Head Allen Screw 2

C-1 M10 Curved Washer 2

1. Locate the hardware bag for Step 1.

2. Place the front base over the frame aligning the holes in the base with the threaded holes
in the frame.

3. Insert the two 6 mm dome head screws with bent washers into the holes in the front base
and tighten screws

8

Step 2: Rear Base Assembly

Parts Required

Rear Base
Base Frame

Hardware Required

Part # Size Description Quantity

A-1 M10 * 90 Dome Head Allen Screw 2

C-1 M10 Curved Washer 2

1. Locate the hardware bag for Step 2.

2. Place the rear base over the frame aligning the holes in the base with the threaded holes in
the frame.

3. Insert the two 6 mm dome head screws with bent washers into the holes in the front base
and tighten screws.

9

Step 3: Handlebar Post Assembly

Parts Required

Handlebar Post
Rubber Boot

Hardware Required

Part # Size Description Quantity

A-2 M10 * 135 Dome Head Allen Screw 1

A-3 M10 * 75 Dome Head Allen Screw 2

B-1 M10 Lock Nut 3

C-2 M10 Flat Washer 6

1. Locate the hardware bag for Step 3 .

2. Slide the rubber boot over the top of the handlebar post as shown in the diagram.

3. Remove the wire tie holding the wiring harnesses in place and connect the two
wiring harnesses.

4. Insert the handlebar post into the frame making sure that the wiring harnesses are not pinched.

5. Install Bolts
a. Insert the long 6 mm dome head bolt with washer through the hole in the front of the

post. Place another washer and 17 mm lock nut on the end and hand tighten.

b. Insert the shorter 6 mm dome head bolts with washer through the side holes in the

handlebar post. Place a second washer and lock nut on the end and hand tighten.

6. Once all the screws are in place, securely tighten using the 17 mm open end wrench
and 6 mm Allen Wrench supplied.

10

Step 4. Frame Assembly

Parts Required

Seat Rail
Base Frame

Hardware Required

Part # Size Description Quantity

A-4 M8 * 16 Dome Head Allen Screw 4

A-5 M10 * 16 Dome Head Allen Screw 8

B-2 3/8 Hex Nut 1

C-2 M10 Flat Washer 8

C-3 M8 Spring Washer 4

D-1 Round Plastic Plug 2

Base Frame

1. Locate the hardware bag for Step 4.

2. Tip the cycle on its nose so that it balances on the front base and nose. Slide the bottom
of the frame over the front base.

3. Using the short 6 mm screws and flat washers hand tighten each of the 4 outside screws
with large washers.

4. Install the leveling foot in the center hole on the base joint. Make sure the 3/8 hex nut is
installed on the foot and screw the foot all the way into the center base hole.

Note: After the frame is completely assembled and the cycle is located to begin your work
outs, adjust the foot so that it just touches the floor

11

Step 4. Frame Assembly cont...

Seat Rail

1. Place the cycle back on its feet and position the seat rail in front of the main frame.
Push together the connectors coming from the main frame with the connector coming
from the seat rail and slide the seat rail over the main frame.

Note: If you have trouble sliding the rail under the plastic cover loosen the phillips screw on
the cover.

2. Using the remaining four short 6 mm Dome Head Screws and four large washers hand
tighten two screws on the bottom of the seat rail and two screws on the side of the seat
rail through the holes in the plastic cover.

3. Using the four 5 mm Dome Head Screws and lock washers hand tighten the four screws
on the bottom of the seat rail in the back where the seat rail and frame meet.

4. Securely tighten all frame screws.

5. Install the round plugs into the side holes on the cup holder covers.

12

Step 5: Handlebar Assembly

Parts Required

Handlebar

Hardware Required

Part # Size Description Quantity

A-4 M8*16 Dome Head Allen Screw 4

C-4 M8 Flat Washer 4

1. Place the handlebars over the frame and connect the wiring harness for the contact
heart rate.

2. Tuck excess wiring and connectors into the handlebars.

3. Place the handlebars over the seat assembly and hand tighten the four short 5 mm Dome
Head Screws with washer.

4. Using the 5 mm Allen Wrench tighten all four screws.

13

Step 6: Seat/Display Console/Pedals

Parts Required

Seat Bottom
Seat Back
Pedals
Display Console

Hardware Required

Part # Size Description Quantity

E-1 5/16 * 2 1/4 Hex Head Bolt 8

E-2 5/6 Lock Washer 8

E-3 M4 * 15 Phillips Head Screw 4

Seat Bottom

Note: The seat bottom comes with 2 sets of holes.
You may need to try both sets of holes to determine
which is more comfortable.

1. Locate the hardware bag for Step 6.

2. Place the seat bottom over the seat assembly
aligning the holes in the assembly with the
4 holes in the bottom of the seat.

3. Using four 12 mm hexagonal bolts and lock
washers secure the seat bottom to the
seat assembly.

Seat Back

1. Place the seat back over the seat assembly aligning the holes in the assembly with the
4 holes in the back of the seat back.

2. Using four 12 mm hexagonal bolts and lock washers secure the seat back to the
seat assembly.

Display Assembly

1. Remove the wire tie from the display bracket and attach the connectors at the back of
the display.

2. Tighten the four Phillips head screws at the back of the display.

Install Pedals

1. Pay attention to make sure the Pedal with an “R” goes on the
right side. This pedal is screwed in clockwise. The Pedal
labeled “L” screws in counter clockwise.

2. Install the pedal straps.

14

C2 UPRIGHT ASSEMBLY

Step 1: Front Base Assembly

Parts Required

Main Frame
Front Base

Hardware Required

Part # Size Description Quantity

A-1 M10 * 90 Dome Head Allen Screw 2

C-1 M10 Curved Washer 2

1. Locate the hardware bag for Step 1.

2. Place the front base over the frame aligning
the holes in the base with the threaded holes
in the frame.

3. Insert the two 6 mm dome head screws with
bent washers into the holes in the front base
and tighten screws.

Step 2: Rear Base / Seat Assembly

Parts Required

Rear Base
Seat

Hardware Required

Part # Size Description Quantity

A-1 M10 * 90 Dome Head Allen Screw 2

C-1 M10 Curved Washer 2

Rear Base

1. Locate the hardware bag for Step 2.

2. Place the rear base over the frame aligning the
holes in the base with the threaded holes in
the frame.

3. Insert the two 6 mm dome head screws with
bent washers into the holes in the front base
and tighten screws.

Seat

1. Push the seat down all the way onto the seat post spindle.

2. Making sure that the seat points straight forward and is level to the ground, tighten
the two 14 mm nuts on each side of the seat clamp.

15

Step 3: Handlebar Post

Parts Required

Handlebar Post
Rubber Boot

Hardware Required

Part # Size Description Quantity

A-2 M10 * 135 Dome Head Allen Screw 1

A-3 M10 * 75 Dome Head Allen Screw 2

B-1 M10 Lock Nut 3

A-4 Phillips Screw 2

C-2 M10 Flat Washer 6

C-4 Flat Washer 2

Main Frame

1. Locate the hardware bag for Step 3.

2. Cut the zip tie holding the post in place next to
the frame.

3. Insert the handlebar post into the frame making
sure that the wiring harnesses are not pinched.

4. Insert the long 6 mm dome head bolt with
washer through the hole in the front of the
post. Place another washer and 17mm lock
nut on the end and hand tighten.

5. Insert the shorter 6 mm dome head bolts with washer through the side holes in the handlebar
post. Place a second washer and lock nut on the end and hand tighten.

6. Once all the screws are in place, securely tighten using the 17 mm open end wrench
and 6 mm Allen Wrench supplied.

7. Locate the Phillips Head Screws and Washers and install the Water Bottle Holder.

16

Step 4: Handlebars/Display/Pedals

Parts Required

Pedals
Handlebars
Display Console

Hardware Required

Part # Size Description Quantity

A5 M10 * 16 Dome Head Screw 4

A-6 Phillips Head Screw 4

Install Pedals

1. Pay attention to make sure the Pedal with
an “R” goes on the right side. This pedal is
screwed in clockwise. The Pedal labeled “L”
screws in counter clockwise.

2.Install the pedal straps.

Handlebars

Note: The handlebars come with two different
installation positions. Tall users and users who
prefer to lean further forward when they ride
should use the more forward position. Users who
prefer to ride in a more relaxed position should
ride with the handlebar further back.

1. Place the handlebars over the top of the handlebar bracket and insert the wiring
harness from the handlebar post through the hole in the handlebar bracket.

2. Align the four holes on the side of the bracket with the four holes in the post bracket.
Install the 6 mm Screws and tighten securely.

Display Console

1. Attach the connectors for the three wiring harnesses to the back of the display.

2. Tighten the four Phillips head screws at the back of the display.

3. Install the batteries by removing the door located on the top of the display console
directly above the storage tray.

17

Where to locate your Exercise Bike

Locate your Exercise Bike in a pleasant area that gives you something to look at while your working
out, such as a window or television. Maintaining an exercise program in a poorly lit area is more
difficult than when located in a pleasant and active location.

Allow a distance of 4 feet between the bike and other objects or surfaces on either side.

Stabilizing Your Exercise Bike

After you have placed the bike where you will be using it, check the unit‘s stability by rocking it
back and forth in all directions. Any movement indicates that the bike needs to be leveled. First
determine which foot is not resting on the floor. Loosen the jam on that foot and adjust the foot
down until it touches the floor, then tighten the jam to keep the foot in place. Repeat as necessary
until the bike is completely stable.

On the R2 recumbent, once the unit is stable, you will also need to lower the center foot until it
touches the floor and tighten the hex nut to keep it in place.

Batteries

There are two AA Batteries included with your exercise bike. They are located inside the battery
cover located on top of the display console. To begin operations you will need to install the batteries
in the display console.

Seat Adjustment

Before working out, make sure that the seat is properly adjusted. Do this by sitting on the seat
and placing the balls of your feet on the pedals. Your knee should be slightly bent when the pedal
is at its furthest point of rotation relative to your body. You should be able to pedal without locking
your knee or shifting in the seat.

Upright Adjustment
Loosen the locking pin on the seat post by turning knob counter clockwise. Pull out on the
knob to allow the seat post to move up and down. Adjust the seat to the proper position and
then tighten the knob by turning it clockwise.

Recumbent
Pull up on the seat adjustment lever located on the right back corner of the seat. Slide the
seat forward and backward as required to give you knee a slight bend when the pedal is
furthest away from your body. Push down on the lever to lock it in place.

18

Leveling Feet

Pedal Strap Adjustments

The straps should be tight enough to keep the ball of your foot on the pedals throughout the com­plete pedal rotation.

Before working out, test each strap and adjust if required.

Each strap comes with a spring loaded clip on the outside of the pedals that keeps the straps in
place. To tighten the strap simply pull down on the loose end of the strap until the strap is properly
tensioned. To loosen the strap, press down on the top of the clip and pull the strap up. Release
the clip and lock the strap in place.

Resistance Adjustment

Belt Tension Adjustment

If during normal operations you feel the belt slipping, you can adjust the tension by tightening the
tension adjustment nut located on the bottom of the exercise bike between the pedals and the front
base. Tighten the nut only until the belt stops slipping. Over tightening can cause damage to the
drive system.

19

Resistance

Adjustment

801-973-9993

www.pcefitness.com

P.O. Box 981316

Park City, Utah 84098-1316