
NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at www.lifespanonline.com.au
Product may vary slightly from the item pictured due to model upgrades
Read all instructions carefully before using this product. Retain this owner’s manual for
future reference.

1. Fix the weight frame (07) to the rear
post (03).
2. Fix the rear post (03) and the middle
post (02) to the T-frame (09).
3. Fix the top beam (01) to the rear post
(03) and the middle post (02).
4. Fix the back cushion (05) onto the
middle post (02).

1. Fix the fly frame (17) to the U-frame
2. Fix the pad (16) to the fly frame (17)
3. Fix the cross tube (08) to the middle
post (02).
4. Fix the cross tube (22) to the top
beam (01)

1. Fix the main tube (21) to the low
frame (13)
2. Fix the loading bar (12) and the
handle bar (18) to the glide part (19).
3. Fix these two parts with the L-frame
(04).
4. Fix these part to the cross tube (08)

Slide the Weight Bars (11) onto the frame.

1. Fix the safe frame (14) to the rear
2. Fix the hook (15) to the main tube (21)
3. Fix the weight bar (11) to the L-frame
(04).
4. Fix the weight bar (06) to the handle
bar (18).

CABLE ATTACHMENT DIAGRAM
Cable A: 340cm
Cable B: 210cm

2. WARRANTY
AUSTRALIAN CONSUMER LAW
Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with
guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. Full details of your consumer rights may be found at
www.consumerlaw.gov.au
Please visit our website to view our full warranty terms and conditions:
http://www.lifespanonline.com.au/Warranty-Policy