The LIFESMART Infrared Heater works with your in‐home furnace to provide
supplement heat. Carefully and thoroughly read this manual before using the
LIFESMART Infrared Heater for the first time. We recommend keeping this manual
for regular review and future reference. This heater is intended for residential use.
Introduction
IMPORTANT INSTRUCTIONS
LIFESMART Infrared Heaters utilize the latest infrared heat technology. LIFESMART Infrared Heaters
provide a safe, convenient, clean, and economical way to distribute heat throughout your home or
business without producing deadly fumes or monoxide gases. Our heating system produces therapeutic
infrared heat that can potentially relieve symptoms of cardiovascular conditions and inflammatory
diseases. Infrared heat technology, in general, produces rays that are safe and highly beneficial to our
bodies and health professionals have been using infrared technology for decades to treat muscle and
joint pains.
LIFESMART Infrared Heaters are constructed of a wood housing. They are equipped with nylon caster
wheels for easy mobility. And the highly efficient filter can be maintained and cleaned by simply rinsing
with warm water.
Safety
USE CAUTION
Save these instructions because electrical safety is essential to keeping your home safe. When using an
electrical appliance, basic precautions should always be followed to reduce the risk of fire, electric shock,
and injury to persons. Please adhere to the following safety instructions:
The heater must be operated by an adult. Keep heater out of the reach of children.
Only operate the heater when it is on the floor.
Do not operate heater near any water.
Do not plug heater into any other cord connected device such as power strip, surge protector,
multiple outlet adapter, grounding adapter, outlet-type air fresheners or extension cords. Plug the
heater cord directly into a 3-prong 120V 15 amp grounded circuit receptacle.
Never plug heater cord into a loose fitting or broken receptacle.
Never alter the heater’s design or operation. Such actions will void warranty and could result in
injury and/or death.
Do not operate the heater if it has a damaged cord or plug.
Do not operate the heater if there are signs of malfunction. If the heater has been dropped or
damaged, do not operate.
Keep combustible materials such as furniture, pillows and other bedding materials, paper(s),
clothing, and curtains at least three feet away from all sides of the heater during operation.
Always unplug heater when not in use.
Do not use the heater outdoors.
Do not run heater cord under carpet. Do not cover cord with throw rugs, runners, or similar
coverings. Do not route cord under furniture or appliances. Route cord away from traffic areas.
Do not use the heater in bathrooms, laundry rooms, or similar indoor locations.
Turn off heater before unplugging.
Do not insert any foreign object or allow foreign object to enter the ventilation opening or
exhaust opening as this may cause electric shock, fire, and/or injury.
Never block the air intake or exhaust opening in any manner as this could lead to fire.
Do not locate heater, when in use, immediately below a receptacle.
Never operate heater in or around a bathtub, shower, or swimming pool.
Only open heater if instructed by an authorized representative of the manufacturer. There are
limited user-serviceable parts inside.
Use heater only as described in this manual. Any other use is not recommended by the
manufacturer as it may lead to fire, electric shock, and/or series physical injury or death.
Heater Specifications
LIFESMART Heater Model# LS-Stealth-6FP
Carton Size: 23.2in x 17.4 in x 21.7 in Thermostat: Electronic Analog
Heater Size: 20.9in L x 15in W x 18.3in H Fan System: Cross Flow Fan
Net Weight: 45.5 lbs Fan Noise Level: 46 db
Gross Weight: 49.5 lbs BTU: 5600
Cabinet: ¾ ply – Dark Oak Delayed Start Function
Power Cord: 5.8 ft / 16 gauge Remote Control
Heat Chamber with Diathermanous Copper Plate “HI” Function: 1500 watts
Heating Elements: 6 Infrared Quartz Bulbs w/ Nickel-Chrome Filament “LOW” Function: 1000 watts
Power Requirement: 120V 15 amp Washable Filter
Heating Elements Life Expectancy Potential: Rated 20,000 hrs Warranty: Limited 5-Year Parts Only
Heat Type: Therapeutic Quartz Infrared Heat
How It Works
The LIFESMART Infrared Heater works with your in-home furnace to provide supplement heat. In short,
room temperature air circulates from the rear of the LIFESMART Infrared Heater, passes through a
highly efficient filter, enters a chamber that houses the Infrared Quartz Bulbs, and exits as heated air
from the Diathermanous Copper Plate constructed on the front of the unit. The LIFESMART Infrared
Heater ideally heats a room of approximately 1000 unobstructed square feet, but can be used to heat up
a single room size up to 1800 square feet, depending on the ambient temperature. And it does all this
with a noise level below 46db. The LIFESMART Infrared Heater is not for use as the primary/sole
heating system.
Components and Functions
A. The LIFESMART Infrared Heater is constructed with Infrared Quartz Bulbs. Each Infrared Quartz
Bulb is rated at 250W. These bulbs produce therapeutic infrared rays that warm the air which
passes through the inner chamber. The Infrared Quartz Bulbs are constructed with a thermal
conducting housing. The incorporated twisted style on each bulb increases the efficiency of the
unit.
B. An AC Cross Flow Fan pushes air over these Infrared Quartz Bulbs. Cross Flow Fans create a
wide flow of air using a cylindrical-shaped impeller. Air is drawn inside the LIFESMART Infrared
Heater, flows along the circumference of the chamber and over the Infrared Quartz Bulbs, and is
blown out laterally creating a uniform flow of warm air.
C. The LIFESMART Infrared Heater has a Delay Start Function which controls the AC Cross Flow
Fan. The purpose of the Delay Start Function is to allow the Infrared Quartz Bulbs to heat up
before the fan begins to circulate the air flow. In addition, the AC Cross Flow Fan will continue to
circulate the airflow after the power is turned off to circulate the warm air from the LIFESMART
Infrared Heater cooling the unit down.
D. The LED Digital Display is a convenient, stylish, and modern way to display the set temperature
and time. This attractive addition compliments the LIFESMART Infrared Heater, in that, it
simplifies and makes controlling the unit easy. Operating the heater is logical and can be done
on the unit itself or by remote.
E. The LED Digital Display is a convenient, stylish, and modern way to display the set temperature
and time. This attractive addition compliments the LIFESMART Infrared Heater, in that, it
simplifies and makes controlling the unit easy. Operating the heater is logical and can be done
on the unit itself or by remote.
F. The sleek, yet beautiful fireplace display is an added visual bonus with adjustable lighting that
adds ambience to any occasion.
Unpacking the LIFESMART Infrared Heater
1. First, check the carton to make sure there are no obvious damages that may have occurred
during shipment.
2. Open the LIFESMART Infrared Heater packaging and remove the heater by sliding it from the box.
You may want to gently and cautiously turn the entire box upside down letting the heater slowly
slide out.
3. Remove all the protective materials from the heater. It may be a good idea to keep the protective
materials and packaging for storage during the off-season.
Operating Instructions
Visually inspect the LIFESMART Infrared Heater for any damages before operation. Do not
operate the heater if any damages are detected. Contact your dealer immediately.
NOTE: “UP” and “DOWN” arrow buttons on the control panel and remote control have
dual function capabilities.
Adjust TIME / TEMP with up arrow or adjust HI / LOW settings.
Adjust TIME / TEMP with down arrow or adjust 0C/0F settings.
Loading...
+ 8 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.