Life Smart LS-8WIQH-DB, LS-8WIQH-LB Owners Installation And Operating Manual

OOWWNNEERRSS IINNSSTTAALLLLAATTIIOONN AANNDD OOPPEERRAATTIINNGG MMAANNUUAALL

LIFESMART INFRARED HEATER

Model: LS-8WIQH-DB / LS-8WIQH-LB

Please read this entire Installation and Operating Manual BEFORE installing and using
your new Infrared Heater. Failure to fully understand and follow instructions may result in
property damage, bodily injury, or even death.

If the Infrared Heater in not used properly, a house fire may result. For everyone’s safety,
FOLLOW all Installation and Operating Directions.

Save These Instructions

Safety Notice

1

TABLE OF CONTENTS

Topic Page(s)

Customer Service & Support 3
Introduction & Specifications 4
Specifications _______________5
Important Safety Information 6-7
Frequently Asked Questions 8-11
Heater Operation 12
Heater Placement 13
Users Guide 14-15
Air Filter Maintenance 16
Warranty 17-19

*Contents in the box:

1. Infrared heater(1unit)

2. Instruction manual(1pcs)

3. Remote Control (2 AAA batteries not included)(1pcs)

2

Customer Service and Support

To Obtain Warranty Support or Advice, Please Complete These Easy Steps:

Contact LIFESMART PRODUCTS Technical Support

Phone: [phone] or 1-214-614-2509

E-mail: [e-mail]

Visit us: www.lifesmartproducts.com

You will need to provide the unit's model number, serial number (located on the

heater’s front panel, rear panel, or on the box), date of purchase, retailer of purchase,

a daytime phone number, and possibly a copy of your receipt.

Be Patient, Clear, and Concise.
Describe the issue and symptoms you have for, and about the product. A certified

LIFESMART Technical Support agent will give you an evaluation of your issue and your
resolution options. If the answer is not available at that time, you will be referred to the
appropriate channels, or given a call/e-mail back within 72 hours with an answer or
resolution.

If after speaking with LIFESMART Technical Support, it is determined by one of our
agents that your unit may need to be sent in to us to be evaluated/repaired, our
representative will provide you with a reference number and provide you with details
on how to send in your unit for repair.

3

INTRODUCTION

Thank you for choosing one of the best Infrared distribution heaters available on the market
today. Our Infrared Heater is a very safe and effective room heater. It produces safe, clean and
economical heat by utilizing quartz infrared heating elements. The heating process of the
Infrared Heater is similar to the way the sun warms the earth. The infrared elements warm the
heat chamber and the whisper quiet fan distributes the accumulated warmth. This process is
unique among heaters in that it minimizes wasteful heat collection at the ceiling height of rooms
and targets it toward the living space instead. Thank you for being our customer, and enjoy your
heater!

Our Infrared Heaters have been tested and listed for installation in residential and mobile homes
by ETL:

3189533

Conforms to UL STD. UL1278
Certified to CSA STD. C22.2 NO.46

4

WARNING: This heater has a voltage rating of 120

volts. The cord has a plug as shown in A. An adapter as
shown in C is available for connecting three-blade
grounding-type plugs to two-slot receptacles. The
grounding lug extending from the adapter must be
connected to a permanent ground such as a properly
grounded outlet box. The adapter should not be used if
a three-slot grounded receptacle is available.

DO NOT DEFEAT THE SAFETY PURPOSE OF THE
GROUNDED PLUG.

SPECIFICATIONS

Electrical:

Voltage: 120V~60Hz
Power consumption: Up to 1500 Watts
Thermostat range: 50-90 Fahrenheit

Dimensions:
16” x 15” x 18.5”, 31.2lbs

SAFETY FEATURES

Tip-Over Safety Feature

This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will
automatically shut the heater off. Once the heater is restored an upright position, the heater will reset. To
continue operation, turn on the heater using the supplied remote control or the control panel on the heater.

Overheat Safety Feature

This heater is equipped with a overheat safety feature. When the heaters internal components reach a certain
temperature that could cause overheat and possible fire, the heater will automatically shut off.

GROUNDING INSTRUCTIONS

WARNING: It is normal for the power cord to feel warm to the touch; however, the power cord prongs

must be tight and secure to the wall outlet. A loose fit between the outlet and the plug may cause excess

heat or overheating of the plug or cord. If this occurs, try inserting the plug into a different outlet.
Contact a qualified electrician to inspect the original outlet for damage or excessive wear.

5

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL INSTRUCTIONS, SAFETY WARNINGS,

AND FAQ’s BEFORE USING THE HEATER

WARNING!

! POTENTIAL FOR ELECTRICAL HAZARD IF NOT ADHERED TO!

When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electric shock, and injury to persons, including the following:

1. This heater must be plugged into a 120V, 15 amp (or more) circuit of its own. Nothing
else can be plugged into the same circuit. If unsure if your home meets this
specification, consult a certified electrician prior to use. Risk of fire, overheat,

malfunction, property damage, injury, or even death may result if not adhered
to!

2. Connect to a properly grounded, 3-prong outlet only. Do not connect the heater to
extension cords, surge protectors, timers, direct breakers, or an outlet with other
appliances connected to the same outlet. Risk of fire, overheat, malfunction,

property damage, injury, or even death may result if not adhered to!

3. This heater is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. Use handles (certain models) or wheels to move this heater.

4. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and
curtains from the front of the heater and keep them away from the sides and rear of
the heater.

5. Extreme caution is necessary when any heater is used by or near children, invalids,
pets, or when the heater is left operating unattended.

6. Always unplug the heater when not in use.

7. Do not operate any heater with a damaged cord or plug or after the heater
malfunctions, has been dropped, or damaged in any manner. Contact the
manufacturer for resolution options.

8. Do not use outdoors. Exposure to outdoor elements such as rain, snow, sun, wind or
extreme temperatures may cause the heater to become a safety hazard.

6