lifeSMART LS-6BPIQH-X Owners Installation And Operating Manual

OOWWNNEERRSS IINNSSTTAALLLLAATTIIOONN AANNDD OOPPEERRAATTIINNGG MMAANNUUAALL

LIFESMART INFRARED HEATER

Model: LS-6BPIQH-X

Please read this entire Installation and Operating Manual BEFORE installing and using
your new Infrared Heater. Failure to fully understand and follow instructions may result in
property damage, bodily injury, or even death.

If the Infrared Heater in not used properly, a house fire may result. For everyone’s safety,
FOLLOW all Installation and Operating Directions.

Save These Instructions

Safety Notice

1

TABLE OF CONTENTS

Topic Page(s)

Customer Service & Support 3
Introduction & Specifications 4
Important Safety Information 5-7
Frequently Asked Questions 8-11
Heater Operation 12
Heater Placement 13
Users Guide 14-15
Air Filter Maintenance 16
Warranty 17-19

*Contents in the box:

1. Infrared heater (1unit)

2. Instruction manual (1pcs)

3. Remote Control (2 AAA batteries not included) (1pcs)

2

Customer Service and Support

To Obtain Warranty Support or Advice, Please Complete These Easy Steps:

Contact LIFESMART PRODUCTS Technical Support

Phone: [phone] or 1-214-614-2509

E-mail: [e-mail]

Visit us: www.lifesmartproducts.com

You will need to provide the unit's model number, serial number (located on the

heater’s front panel, rear panel, or on the box), date of purchase, retailer of

purchase, a daytime phone number, and possibly a copy of your receipt.

Be Patient, Clear, and Concise.
Describe the issue and symptoms you have for, and about the product. A certified

LIFESMART Technical Support agent will give you an evaluation of your issue and your
resolution options. If the answer is not available at that time, you will be referred to the
appropriate channels, or given a call/e-mail back within 72 hours with an answer or
resolution.

If after speaking with LIFESMART Technical Support, it is determined by one of our
agents that your unit may need to be sent in to us to be evaluated/repaired, our
representative will provide you with a reference number and provide you with details
on how to send in your unit for repair.

3

INTRODUCTION

Thank you for choosing one of the best Infrared distribution heaters available on the market
today. Our Infrared Heater is a very safe and effective room heater. It produces safe, clean and
economical heat by utilizing quartz infrared heating elements. The heating process of the
Infrared Heater is similar to the way the sun warms the earth. The infrared elements warm the
heat chamber and the whisper quiet fan distributes the accumulated warmth. This process is
unique among heaters in that it minimizes wasteful heat collection at the ceiling height of rooms
and targets it toward the living space instead. Thank you for being our customer, and enjoy your
heater!

Our Infrared Heaters have been tested and listed for installation in residential and mobile homes
by ETL:

3189533

Conforms to UL STD. UL1278
Certified to CSA STD. C22.2 NO.46

SPECIFICATIONS:

Electrical:

Voltage: 120V~60Hz
Power consumption: Low 1000 Watts/High 1500 Watts
Thermostat range: 50-90 Fahrenheit

Coverage:
Up to 1500 square feet of unobstructed area

Dimensions:

16.5” x 13.2” x 16.9”, 18.7 lbs
Safety Features:

Advanced Safety Overheat Shut Off
Tip Over Shut Off

Features:

Remote Control
High/Low/Eco Heat Settings
Air filtration system
Lifetime Washable Filter
On/Off Timer
Injection Molded Plastic Cabinet

4

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL INSTRUCTIONS, SAFETY WARNINGS,

AND FAQ’s BEFORE USING THE HEATER

WARNING!

! POTENTIAL FOR ELECTRICAL HAZARD IF NOT ADHERED TO!

When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electric shock, and injury to persons, including the following:

1. This heater must be plugged into a 120V, 15 amp (or more) circuit of its own. Nothing
else can be plugged into the same circuit. If unsure if your home meets this
specification, consult a certified electrician prior to use. Risk of fire, overheat,

malfunction, property damage, injury, or even death may result if not adhered
to!

2. Connect to a properly grounded, 3-prong outlet only. Do not connect the heater to
extension cords, surge protectors, timers, direct breakers, or an outlet with other
appliances connected to the same outlet. Risk of fire, overheat, malfunction,

property damage, injury, or even death may result if not adhered to!

3. This heater is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. Use handles (certain models) or wheels to move this heater.

4. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and
curtains from the front of the heater and keep them away from the sides and rear of
the heater.

5. Extreme caution is necessary when any heater is used by or near children, invalids,
pets, or when the heater is left operating unattended.

6. Always unplug the heater when not in use.

7. Do not operate any heater with a damaged cord or plug or after the heater
malfunctions, has been dropped, or damaged in any manner. Contact the
manufacturer for resolution options.

8. Do not use outdoors. Exposure to outdoor elements such as rain, snow, sun, wind or
extreme temperatures may cause the heater to become a safety hazard.

9. This heater is not intended for use in bathrooms, laundry areas and similar indoor
locations, nor any locations that use GFCI outlets.

5

10. Never place heater where it may fall into a bathtub or other water receptacles.

11. Do not run cord under carpet. Do not cover cord with throw rugs, runners, or similar
coverings. Arrange cord away from traffic area and where it will not be tripped over.

12. The heater must be plugged into a wall outlet that is a DEDICATED CIRCUIT, with a
minimum 15 amp rating on that individual circuit.

13. To disconnect the heater: FIRST, turn the power button to the “off” position, then
remove plug from the wall outlet.

14. Do not allow foreign objects to enter or block any ventilation or exhaust opening as
this may cause an electric shock or fire, or damage the heater.

15. Allow at least 3 feet of unobstructed space to the front and rear of the heater to allow
for maximum heat, air, and ventilation flow.

16. A heater has hot and arcing or sparking parts inside. Do not use it in areas where
gasoline, paint, or flammable liquids are used or stored, nor use flammable solvents to
clean the heater. Also, make sure to keep heater dry at all times.

17. Use this heater only as described in this manual. Any other use not recommended by
the manufacturer may cause fire, electric shock, or injury to persons.

18. Do not use abrasive solvents to clean the heater as it may cause damage to the finish
or casing.

PLEASE REVIEW FREQUENTLY ASKED QUESTIONS ON THE NEXT
FEW PAGES PRIOR TO USING YOUR HEATER.

6