Life Smart LS2003FRP13, LS2003FRP13D Owners Installation And Operating Manual

Infrared Fireplace Heater

OWNERS INSTALLATION AND OPERATING MANUAL

Model: LS2003FRP13 / LS2003FRP13D

Safety Notice

Please read this entire Installation and Operating Manual BEFORE installing and using your new
Infrared Fireplace Heater. Failure to fully understand and follow instructions may result in property
damage, bodily injury, or even death.
If your Infrared fireplace heater is not used properly, a house fire may result. For everyone’s safety,
FOLLOW all Installation and Operating Directions. Infrared fireplace heaters have been designed for
use in the US and are suitable for mobile homes.

Save These Instructions

1

TABLE OF CONTENTS

Topic Page(s)

Customer Service & Support 3
Introduction & Specifications 4
Safety Information 5-6
Fireplace Placement 7
Fireplace Operation 8
Troubleshooting & Fireplace Maintenance 9
Warranty 10-11

*Contents in the box:

1. Infrared Fireplace heater(1unit)

2. Instruction manual(1pcs)

3. Remote control (2 AAA batteries not included)(2pcs)

2

Customer Service and Support

To Obtain Warranty Support or Advice, Please Complete These Easy Steps:

Contact LIFESMART PRODUCTS Technical Support

Phone: [phone] or 1-214-614-2509

E-mail: [e-mail]

Visit us: www.lifesmartproducts.com

You will need to provide the unit's model number, serial number (located on the

heater’s front panel, rear panel, or on the box), date of purchase, retailer of

purchase, a daytime phone number, and possibly a copy of your receipt.

Be Patient, Clear, and Concise.
Describe the issue and symptoms you have for, and about the product. A certified

LIFESMART Technical Support agent will give you an evaluation of your issue and your
resolution options. If the answer is not available at that time, you will be referred to the
appropriate channels, or given a call/e-mail back within 72 hours with an answer or
resolution.

If after speaking with LIFESMART Technical Support, it is determined by one of our
agents that your unit may need to be sent in to us to be evaluated/repaired, our
representative will provide you with a reference number and provide you with details
on how to send in your unit for repair.

3

INTRODUCTION

Thank you for choosing one of the best Infrared absorption fireplace heaters available in the
market today. By using this infrared fireplace heater you can efficiently heat up to 1800 square
feet! You can even turn down the main thermostat in your home and let this heater carry some
of the home heating duty. This fireplace heater is NOT intended to replace your homes furnace;
rather it is designed to be a supplement to it. It is not an instant heater – it can take up to 24
hours for a room to reach the desired temperature. Our Infrared fireplace heaters have been
tested and listed for installation in residential and mobile homes by ETL:

3189533

Conforms to UL STD. UL1278
Certified to CSA STD. C22.2 NO.46

SPECIFICATIONS:

Electrical:

Voltage: 120V~60Hz
Power consumption: 1000-1500 Watts
Thermostat range: 50-90 Fahrenheit

Coverage:
Up to 1,500 square feet

Dimensions:

31.1”Wide x 11.2”Deep x 25.4”Tall, 60 lbs

Safety Features:
Overheat shut off

Features:

Remote control
Vivid Log/ Flame Effect
Eco Friendly Wood

4