LifeSafety Power ADC-ACC1-17-PSE Quick Manual

QUICK GUIDE ADC-ACC1-17-PSE

101317_rev1



Description



The ADC-ACC1-17-PSE is a single door access control unit
featuring dual voltage power, an ADC-ACC1-17 controller,
and a preinstalled adapter plate for an ADC-ACX1 single
door reader board, housed in a 12”x14”x4.5” metal enclo­sure with battery space.



Equipment List



1. Power Supply 24VDC / 3A (model: FPV4)

2. Secondary 12V supply (model: B100)

3. ADC-ACC1-17 controller

4. Mounted ADC-ACX1 expansion back plate

5. ADC-ACX1 mounting hardware

6. AC power cord

Bracket for

ADC-ACX1 or

ADC-ACC1-17

Accessories included

• AC power cord

• Battery harness

• Bracket mounting hardware

System Operation

The FPV4 power supply converts AC primary power to 24VDC for charging the battery set and powering the B100, locking
device(s), and 24V auxiliary devices. The B100 is powered from the FPV4 Auxiliary terminals and steps the 24V down to
12V to power the ADC-ACC1-17 controller, reader(s), and any 12V auxiliary devices.

The battery set is charged by the red/black harness on the bottom edge of the FPV4. The battery set MUST be two 12V
batteries in series for a 24V battery set. Observe polarity or damage to the system will occur.

Positive lock power is prewired to the ADC-ACC1-17 lock relay terminal 1C. The lock positive should be wired to the NC
(Fail Safe) or NO (Fail Secure) terminal as appropriate. The lock negative should be wired directly to the FPV4 DC OUT (-)
terminal to minimize noise and surges in the system.

Terminal Output Ratings

**Max currents listed are for individual terminals - total current at 12V and 24V not to exceed max rating of supply

Board Terminal Voltage Max Current** Notes

FPV4

B100

ADC-ACC1-17

October 2017 1/2 www.lifesafetypower.com

DC OUT

AUX OUT

DC OUT

J2 (DC OUT)

J5 (DC OUT)

J1 (DC IN)

J4 (DC IN)

VO

1-C (NO or NC)

24V 1.5A

24V 0.75A

12V 1.5A

12V 1.5A

12V 1.5A

24V 0.75A

24V 0.75A

12V 0.65A

24V 1.5A

Output can be switched by FAI Input on FPV4

Max Current includes current drawn by B100

For additional 12V devices

For additional 12V devices

For additional 12V devices

For additional 24V devices

For additional 24V devices

Max Current includes reader current draw

Switched Lock Output - Ground at FPV4 DC OUT (-) Terminal

ADC-ACC1-17-PSE QUICK GUIDE 2

Wiring Diagram

Power Budget

CURRENT DRAW

Attach AC Line cord to

FPV4 AC Input Terminals

From Terminal Typical Maximum

FPV4 - 24V MAIN OUT

FPV4 - 24V AUX OUT

B100 - 12VDC OUT

0.5A 1.5A

0.25A 0.75A

0.5A 1.5A

24VDC

AUXILIARY

AC ON

L L

FAI INPUT

V- I- I+ V+

SYS FLT

NC NC

NO NOC C

AC FLT

AUX

_

+

RED/BLK

L N

Power Supply voltage

factory pre-set for 24V

DO NOT CHANGE!

24V

FAI

FPV4

24V PS/Charger

BATTERY

+

i

24VDC

MAIN

-

+

DC

BLUE

24VDC

VIO/BLK

CAT5

TB5

24VDC

DC IN

DC OUT

BR

B100

DC IN

24 to 12V converter

FAULT

ADC-ACC1-17

TB5

TB4

GND

2-C

NO

NC

1-CNC

NO

GND

VIN

VO

TB3

DAT

CLK

Reference ADC-ACC1-17 Manual
for Reader and Input Information

DC IN

DC OUT

BR

–

+

12VDC

TB2

CLK

GND

BZR

LED

DAT

DC OUT

LED

VO

BZR

12VDC

J7

TB1

IN1

IN2

TB1

ORN/BLK

B100 Screw Terminals

May be used for

12V Aux Power

Cabinet
Tamper

Switch

Locking

Device

- +

12V

Battery

-

+

- +

12V

Battery

LifeSafety Power Inc.

750 Tower Road, Unit B
Mundelein, IL 60060 USA

www.lifesafetypower.com

Tel [phone]
[e-mail]

October 2017

DC OUT Terminals

may be used for

24V Aux Power

of lock and system requirements

Vo Terminal may be

used for 12V Aux Power

(650mA Max w/ Reader)

Connect Lock to either

NO or NC based on type

Important: All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate
the suitability of each product for their particular application. LifeSafety Power makes no warranties as to the accuracy or
completeness of the information, and disclaims any liability regarding its use. LifeSafety Power’s only obligations are those
in the LifeSafety Power Standard Terms and Conditions of Sale for this product, and in no case will LifeSafety Power or its
distributors be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of
the product. Specifications are subject to change without notice. In addition, LifeSafety Power reserves the right to make
changes—without notification to Buyer—to processing or materials that do not affect compliance with any applicable specification.

2/2 www.lifesafetypower.com