LifeSafer L 250 User Manual

LifeSafer

®

L 250 Ignition Interlock User’s Guide

(With or without camera)

Also available in Spanish & French

To schedule your service appointment

or for 24-hour emergency service.

Call 1-800-634-3077

www.LifeSafer.com

Overview ............................................................................................................................................... 1

What does the device look like? ...................................................................................................2

How does the device work - Handset? ......................................................................................3

How does the device work - Camera? ........................................................................................4

Taking a test .........................................................................................................................................5

Engine Stall Protect ........................................................................................................................... 9

Menu Options ..................................................................................................................................... 9

Troubleshooting ...............................................................................................................................11

Service/Monitoring Appointments ........................................................................................ .13

Proper Care and Use ...................................................................................................................... .16

Terms and Conditions ....................................................................................................................18

TABLE OF CONTENTS

© 2015 LifeSafer, LLC. All rights reserved.

OVERVIEW WHAT DOES THE DEVICE LOOK LIKE?

!

This manual contains operating instructions for the use of the
LifeSafer L 250 Ignition Interlock Device (IID) with or without a camera.
Not all jurisdictions require the addition of a camera. If you are not required
to have a camera please disregard any instructions on camera usage.

The purpose of an IID is to prevent vehicle start-up until the user has
passed an alcohol test. The IID is not an indicator of your level of impairment
or your ability to safely operate a vehicle. You must rely on your own
judgment. If you have been drinking alcoholic beverages, please nd
an alternative form of transportation.

This handbook explains the use of the LifeSafer L 250 IID, including
operation, reporting and care of the unit. Please take the time to
read this handbook while you are waiting for the IID to be installed
in your vehicle, so any questions you may have can be answered
before you leave.

Today, you will be trained on the proper use of the LifeSafer L 250 IID.
Your service provider will also conrm the date of your rst service
appointment. This date will also be programmed into the device.
At each service appointment the device’s event log will be
downloaded and reported to your Monitoring Authority.

MOUTHPIECE

RECEPTACLE

(Located under

mouthpiece)

DISPLAY

LEFT BUTTON

RIGHT BUTTON

COIL CORD

CONNECTOR

DOWN BUTTON

UP BUTTON

MOUTHPIECE

WARNING:

It is your responsibility to keep your IID in good
working order. You will be responsible for any
lost or damaged parts of the unit.
Please call 1-800-634-3077 for details on our
Loss Protection Plan.

HANDSET

CAMERA

*

* See page 17 for FCC compliance information.

1 2

HOW DOES THE DEVICE WORK? - HANDSET

The following screens will appear, in order, once you have powered up
the device. You will have 60 seconds to take a test before the device will
automatically power down. To manually power down the device, press
and hold the Up or Down button for 3 seconds.

State Camera Requirement

Some States require the addition of a camera so that the person
taking the test can be identied and submitted to a monitoring
authority as part of the reporting process.

POWER ON WELCOME WARNING

HOW DOES THE DEVICE WORK? - CAMERA

The camera will be installed and aligned as part of the device installation
process. Your service provider will make sure that the focus, eld of view
and operation of the camera is working correctly before you leave.
Therefore, there will be no need for you to touch the camera during
testing or any other time.

Wide Range Of View

Due to the camera’s wide range of view, you will not need to look
directly at the camera while blowing into the device during any
test you need to take while in your vehicle.

Powering Up
the Device:

To turn on the
device turn the
vehicle ignition
switch on.

3 4