LifeOX AIR- OZZY Instructions For Use Manual

MAINTENANCE AND TROUBLESHOOTING

If malfunction occurs, do not repair device on your own. Contact your seller.

Malfunction

How to solve it

Ozone generator doesn´t

work

Check all cable connections and car battery charge.

Ozone generator is noisy

Disconnect ozone generator
from socket, remove filter,
clean it with hoover and
place it back.

TECHNICAL DETAILS:

CONTENTS OF PACKAGING:

Voltage

12V DC/230V AC

Item

Amount

Power

max. 10 W

Ozone generator LifeOX®-AIR OZZY

1 pc

Model

aluminium, plastic

Adapter 230V /12V

1 pc

Weight

500 g

Instructions for use

1 pc

Dimensions

70x70x185 mm

Guarantee certificate

1 pc

Protection

IP 20

Sticker (Certificate of purity)

… pc

Fuse protecting car battery
from discharge

Supply CL conductor

1 pc

DO NOT THROW USED DEVICE INTO UNSORTED WASTE, BECAUS E IT CONTAINS

SUBSTANCES DANGEROUS FOR ENVIRONMENT. DEVIC E MUST BE PUT TO

APPROPRIATE RECYCLING CENTER AND RECYCLED SUBSEQ UENTLY.

Produced by:

LIFETECH s.r.o., Sumavska 15, 602 00 Brno, Tel. + 420 541 592 253, www.lifeox.com

INSTRUCTIONS FOR USE - LIFEOX

®

AIR- OZZY

USE: SMELL, BACTERIA AND MOULDS REMOVAL FROM INDOOR SPACES, CARS
(INCL. AIR-CONDITIONING SYSTEMS), HOUSEHOLDS, OFFICES, ETC.

CAUTION! READ THIS MANUAL CAREFULLY BEFORE USING DEVICE!

START-UP IN 4 STEPS:

Place device on a solid
base

Plug device into a
socket

Set time

Ventilate the space after
end of the process

CAUTION – INSTRUCTIONS

If you need to enter treated space before end of cleaning process, open

windows, doors, turn device off and ventilate the space.

Remove plants and prevent people from entering space during

ozonation!

Long-term inhalation of ozone can cause eye and respiratory system

irritation!

Keep device in dry environment! Avoid high temperatures!
Do not use in dusty and oily environment!
Do not use near explosives and flammable substances!
Do not cover holes for air inlet and outlet of ozone generator!
Do not use device with damaged cable or fan not running!
Do not use device without inlet filter! Sucked particles can damage the

device.

Device does not damage clothes, shoes, upholstery, etc.
If you bring device from low temperature space to one of higher

temperature, wait a few minutes for device to warm up.

In case the voltage of car battery falls under 10V, ozone generator turns

off automatically.

START-UP (DETAILS):

For car use follow steps 1 - 8. For other spaces steps 1-3, 7, 8.

1. Remove sources of smell from treated space (including air fresheners, food, etc.).

2. Level the ozone generator to horizontal position (for example on passanger front

seat). If smell is concentrated on one spot, point ozone outflow at it (Note: outflow
side is the one without a filter).

3. For short treatment plug the device in 12V (front panel of the car) or 230V socket

for longer treatment (use adapter, put extension cord through narrow gap in
window). Device contains fuse against battery depletion, so you don´t need to be
afraid you will not start the car engine. In trucks with 24V socket use 12V to 24V
adapter for using device.

4. Turn radio and lights off.

5. If you want to disinfect air conditioning and ventilation system, turn inside (closed)

cirulation on (on lowest level), flow through front panel and temperature on lowest
level. If its too hot outside, set the air-conditioning approximately to 20°C.

6. Make sure that you closed all windows (except gap in case of extension cord) and

secured doors against entrance.

7. Turn the device on, set time and leave treated space. (If you are willing to change

time setting, turn the device off and set time anew.)

8. Ventilate the space after treatment for 10-15 minutes or wait 1 hour for ozone to

decompose. If you still feel bad smell after treatment, it is necessary to repeat
ozonation process. After second treatment the disinfection process is usually
finished.

EXAMPLE TIME SETTING ACCORDING TO SPACE VOLUME