Life 'n soul LnS-MT101, LnS-MT102 User Manual

Bluetooth Earphone with Adapter

LnS-MT101

Thank you for purchasing the LnS-MT101, we hope you will be
delighted with its operation. Please read this user guide to get
started and make the best use of the MT101’s many features.

Bluetooth Wireless Technology

Bluetooth wireless technology propels you into a new
dimension in connectivity. Your Bluetooth adaptor can
communicate with other Bluetooth devices within a range of 10
meters (30 feet).

How to use your wireless earphone?

Your wireless earphone equipped with Bluetooth technology
allows you to connect with other similarly equipped devices.
* Handle incoming and outgoing calls with the adaptor call
handling button.
* Use voice dialing to make calls.

Product Features:

STEREO Bluetooth Adapter Constituent Part:

1. The indicator light 2. Power Button 3. Charger cable

Means of Charging:

1.Travel Charger DC5V 300mA 2.USB Charger USB +5V

Battery Standard:

1. High-capability Rechargeable Lithium Polymer Battery

2. Battery Voltage:3.7V
Additional Functions to Protect Battery

Product Standard:

1. Class 2 Operation 2. Talk Time: 5 hours

3. Playing music time: 4.5 hrs.

4. Standby Time: 120 hours .
NOTED: *Standby time and talking time may be dierent
subject to network situation*

Turning on/o the Bluetooth Adapter

Power on: Press and hold MFB button for 5~7 seconds until blue
and red LED ashes.
Power o: Press and hold MFB button for 5-6 seconds until red
LED o.
Remark: In order to save power, the headset will turn o
automatically if no devices can be connected after 5 minutes.

Pairing the Bluetooth Adapter with Bluetooth devices

(phone or music device)
Ensure the adapter is turned o, otherwise turn it o rst
and then press and hold MFB button for 5~7 seconds until
LED ashes alternate red and blue, then the headset will turn
on. The device then enters pairing mode when the blue LED
ashes.
Place the headset and Bluetooth device (phone or music
device) where they are easily viewable by no more than 1 meter
apart.
Activate the Bluetooth function on your Bluetooth device
(phone or music device) for Bluetooth devices (see the user
guide of your Bluetooth device (phone or music device) for
instructions).

MFB

Voice Control

LED

Select the handset ‘LnS-MT101’ from the found devices list on
your Bluetooth device (phone or music device).
If necessary, enter the password ‘0000’ to conrm the pairing
of your Bluetooth stereo headset with the Bluetooth device
(phone or music device)

1)After successful connection, blue LED ashes twice or three
time every 10 seconds.
You should now be able to make and receive a call using the
headset.

Answering a Call

When you hear the ring tone, press the Multifunction Button
once or press the button on your phone's keypad, but you may
then need to transfer the call to your headset by pressing and
releasing the Multifunction Button once (depending on your
phone).

Ending a Call

Press and release the Multifunction Button once or end call
from phone keypad.

Answering or Rejecting a Call when Listening to Music:

If there is ring tone of incoming call when you are listening to
music, in your phone or PC or other Bluetooth enabled devices,
press either "Power ON / OFF / Answer a call" button for 2
seconds to reject the call or press the Multifunction Button to
answer the call.

Multimedia Feature:

If the pairing is successful with the phone which supports 1.2 ,
A2DP prole, it allows you to enjoy the real stereo sound music
from your phone. When there is an incoming call, the headset
will automatically switch to phone mode and resume to music
mode when the call ends. This feature works same with PC.

Redialing the Previous Call:

Press the Multifunctional Button for 2 seconds, and then it will
make a call to the previous number you called.

Playing Music:

When you are listening to the music from PC (Music format
recommended: Windows Media Player), you can press Play,
Pause, Previous Song, Next Song (refer to the"Button's Feature")
to select your optimal performance.

Volume Control:

Volume will be up when you press the Volume Control
(+)3seconds, and will be down when you press the volume
Control (-)3seconds.
lmportant:Please kindly note that the functions or operations
stated in this User Manual are only applicable to mobile phones
which support Bluetooth. Please carefully read your phone's
instruction guide because the operation might be dierent.

Important and Noted:

1. Before charging, please check the charger suit for Bluetooth
adaptor.

2. Please use the original charger. If you use another charger
and charging, you might damage the adaptor. That is
DANGEROUS and you have violated the plan regulation.

3. Bluetooth adaptor’s battery is Li-ion battery. Don’t take it out.
Protect the goods against spoilage.

4. Keep your adaptor o when you don't use it. You need to
charge it each month, if you don’t use it.

5. Don’t throw it into re

Safety Instructions

1. Keep the unit away from heat sources, direct sunlight,

humidity, water and any other liquids.

2. Do not operate the unit if it has been exposed to water,
moisture or any other liquids to prevent against electric shock,
explosion and/or injury to yourself and damage to the unit.

3. Do not use the unit if it has been dropped or damaged in any
way.

4. Repairs to electrical equipment should only be performed by
a qualied electrician. Improper repairs may place the user at
serious risk.

5. Do not use the unit with wet hands.

6. Do not put objects into any of the openings.

7. Keep the unit free from dust, lint etc.

8. Do not use this unit for anything other than its intended use.

9. Keep the unit out of reach of children.

10. This appliance is not a toy.

11. Do not use the handset at excessive levels as damage to
hearing may occur.

12. Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat place, such as sunshine, re or the
like.

Multipoint function:

Step 1:
Pair the rst mobile phone with the Bluetooth adapter
A: In the power o status, press the power button 3-10 seconds,
in which the light will ash red and green.
B: Open the Bluetooth mobile phone, searching the
corresponding Bluetooth adapter, pairing.
Step 2:
Pair the rst mobile phone with the Bluetooth adapter
C: Press the power button 3-5 seconds, close the Bluetooth
adapter, and keep the status of rst mobile phone.
D: Press the power button for 8-10 seconds, in which the light
will ash red and green.
E: Open the Bluetooth of the second mobile phone, searching
and pairing.
Step3:
The rst mobile phone connect to the Bluetooth adapter
F: In which the rst mobile is currently disconnected with the
Bluetooth adapter
G: Keep the status of Bluetooth adapter; search the Bluetooth
adapter in the rst mobile phone
H: Connect the Bluetooth adapter directly, dual pairing done.

www.lifensoul.com

Écouteur Bluetooth avec adaptateur

LnS-MT101

Vous venez d’acquérir le LnS-MT101, et nous espérons que
vous en serez pleinement satisfait. Merci de lire ce manuel
d’utilisation an de commencer à exploiter les nombreuses
fonctions du MT 101.

Technologie Bluetooth sans l

La technologie Bluetooth sans l vous propulse dans une
toute nouvelle dimension de connectivité. Votre adaptateur
Bluetooth communique avec d’autres dispositifs Bluetooth
dans une portée de 10 mètres (30 pieds).

Comment utiliser votre écouteur sans l?

Votre écouteur sans l équipé de la technologie Bluetooth vous
permet de vous connecter à d’autres appareils similaires.
* Gérer tous vos appels à l’aide de la touche de gestion des
appels de l’adaptateur.
* Utilisez la numérotation vocale pour passer des appels.

Sont inclus:

Composante de l’adaptateur Bluetooth STÉRÉO:

1.Voyant lumineux 2.Touche Power 3.Cordon du chargeur

Moyens de chargement:

1.Chargeur portatif DC5V 300mA

2.Chargeur USB, USB +5V

Normes de la batterie:

1.Batterie lithium-polymère rechargeable Haute performance

2.Tension de la batterie: 3.7V

Fonctions supplémentaires pour protéger la batterie du
produit:

1.Fonction de Classe 2

2.Durée de conversation: 5 heures

3.Durée de lecture musicale: 4 heures 30 minutes

4.Mode veille: 120 heures
REMARQUE: *Les durées de veille et de conversation peuvent
varier selon le réseau utilisé*

Allumer/Éteindre l’adaptateur Bluetooth

Allumer: Appuyer et maintenir la touche MFB pendant 5-7
secondes jusqu’à ce que le voyant LED bleu et rouge clignote.
Éteindre: Appuyer et maintenir la touche MFB pendant 5-6
secondes jusqu’à ce que la LED rouge s’éteigne.
Remarque: An d’économiser la batterie, les écouteurs

s’éteindront automatiquement si aucun appareil ne se connecte
après un délai de 5 minutes.

Jumeler l’adaptateur Bluetooth avec des périphériques
Bluetooth (téléphone ou périphérique musical)

Assurez-vous que l’adaptateur est éteint. Dans le cas contraire,
éteignez-le puis appuyez et maintenez enfoncé la touche MFB
pendant 5 à 7 secondes jusqu’à ce que la LED clignote et alterne
entre la couleur rouge et bleu. Les écouteurs s’allument alors.
L’appareil entre alors en mode de jumelage lorsque la LED bleu
clignote.

MFB

Contrôle du volume

LED

Placer les écouteurs et le périphérique Bluetooth (téléphone
ou périphérique musical) à moins d’1 mètre de distance l’un de
l’autre;
Activer la fonction Bluetooth sur votre appareil Bluetooth
(téléphone ou périphérique musical) pour les périphériques
Bluetooth (voir le manuel d’utilisation de votre appareil
Bluetooth (téléphone ou périphérique musical) pour les
instructions).
Sélectionner l’appareil « LnS-MT101» depuis la liste des
périphériques trouvés sur votre appareil Bluetooth (téléphone
ou périphérique musical).
Si nécessaire, tapez le mot de passe “0000” an de conrmer
le jumelage de vos écouteurs STÉRÉO Bluetooth à un autre
appareil Bluetooth (téléphone ou périphérique musical)

1)Une fois la connexion établie, la LED bleu clignote deux ou
trois fois toutes les 10 secondes.
Vous pouvez désormais passer et recevoir des appels grâce aux
écouteurs.