Life 'n soul LnS-B106 User Manual
SPORTY BLUETOOTH EARPHONE LnS-B106
music & call
DESCRIPTION
Talk time: 7 hours Music time: 7 hours
Standby time: 300 hours
Bluetooth version: 4.0
Bluetooth proles: A2DP/HFP/HSP/
AVRCP
Solution: CSR
Noise reduction: 2-MIC CVC noise
reduction
Wireless range: 10m
1. Ear cap
2. Multifunction button
3. Charge jack
4. Ear Hoop
5. Status indicator
6. Noise reduction mic
7. Track Back Volume -
8. Track forward Volume +
9. Talking mic
10. Line
Basic operation
1. Volume control: Press and hold the "+" or "-" button for a short time during calls
or music playing, the volume will change level by level with a "beep" for each level
change. If you press the "+" or "-" button after the maximum volume or minimum
volume is reached, the volume will not change. The "beep" at this moment means
that the volume has been adjusted to the maximum or minimum.
2. Multifunction button: this button is used to turn on/o the headset, connect
and reset headset, etc.
3. LED indicator and voice prompts: When you turn on the headset, the blue LED
will ash three times and a voice prompt "power on" will appear. When you turn
o the headset, the red LED will ash three times and a voice prompt "power o"
will appear. When your headset is in turning on mode or in standby mode, the
blue LED will ash once every 5 seconds. During an incoming call, the blue LED
will ash continuously. If the call is nished, the blue LED will ash once every 5
seconds. If your headset is being charged, the red LED will light. If your headset is
fully charged, the red LED will turn o and the blue LED will turn on.
Pair & connect
1. With the headset power o, press and hold the Multifunction Button for about
6 seconds. You will hear the voice prompts "power on" and "pairing" and see the
blue LED and red LED ash alternately.
2. Turn on the Bluetooth feature on your mobile phone or
other devices, then use menus to "add", "search" or
"scan" new Bluetooth devices.
3. Choose "LnS-B106" from the Bluetooth device list of your mobile phone or
other devices and connect (if you are required to enter the password, enter 0000).
When connected, you will hear the voice prompt "connection successful". Now
you can use the call function or listen to the audio on your mobile phone or other
devices.
4. Once paired with the rst device, B106 will automatically search for a second
device for 30 seconds. If no second device is found, music will resume play with
rst device as usual. If second device is found, pairing will occur immediately.
Auto power-off
When the distance between the earpiece and the mobile phone is beyond
eective range, a voice prompt "connection lost" and earpiece disconnects with
the mobile phone, the earpiece will power o automatically for 30 minutes.
LnS-B106
OPERATING INSTRUCTION
Multipoint connection
1. With the headset powered o, press and hold the multifunction button for 6
seconds to turn the Bluetooth feature on and enter pairing mode.
2. Turn on the Bluetooth feature on the rst mobile phone to pair with the
headset. Turn o the headset after they are connected.
3. Turn on the Bluetooth feature on the second mobile phone to pair with the
headset.
4. Restart the "B106", the headset will connect to the two paired mobile phones
automatically.
Calls
1. Answer a call: Press volume button (+ or -) to answer an incoming call.
2. End a call: Press and hold the volume button (+ or -) for about 2 seconds to end
a call.
3. Redial last call: Press the volume button "-" twice. The mobile phone will redial
the last number.
4. Automatic switch between music and calls: During a phone call, your music will
pause. When the call ends, music will resume playing.
Music
Operation (compatibility with the player is required)
1. Go to previous song: Press and hold " " for about 2 seconds when playing
music, and the previous song
will be played.
2. Go to next song: Press and hold " " for about 2 seconds when playing music,
and the next song will be played.
3. Pause/Play: When playing music, press "-" and "+" together for a short time to
pause/play music.
4. Automatic switch between music and calls: During a phone call, your music will
pause. When the call ends, music will resume playing.
Charge
Your headset has enough power to complete the pairing and a few calls. When
battery is low, you will hear the voice prompt "battery low". It takes 1.5 hours to
fully charge the headset. The red LED turns on during charging. The red LED will
turn o and the blue LED will turn on after being fully charged.
Battery Indicator
When the headset is connected to a device
with iOS system, a battery indicator will
appear at the upper right of the system,
indicating battery status of the headset.
Connection standby
After successful pairing and connection, you will hear the voice prompt
"connection successful". The headset will be in turning on mode or standby mode
automatically and the blue LED will ash once every 5 seconds, when the headset
disconnects from the phone, you will hear the voice prompt "connection lost".
Automatic connection after powering on
In turning o mode, press and hold the multifunction button for about 2 seconds
and release. The headset will search valid devices paired before and connect with
them automatically, with the voice prompt "connection successful".
Power off
In turning on mode, press and hold the multifunction button for about 4 seconds.
The red LED will ash three times rapidly before turning o. A voice prompt
"power o" will appear, indicating the headset has been turned o.
Hard reset
In turning on mode, press and hold the multifunction button with the charger
plugged to reset the headset. Once reset, the red LED will light (you can release
the multifunction button 2 seconds after mounting the charger).
www.lifensoul.com
Loading...