Life Fitness ST04090901N1 User manual

SB No. ST04090901N1

Original Date

SEP 09, 2004

Revised Date-Problem Code-Type Code

­Subject: PLLL Retrofit KIt Part No. 7757401.
Serial Number: ALL
Time Required: 15 min 30 min 45 min 1 hr +

Distribute To: Internal Dealer ISO Customer

Note: The circled numbers in the illustrations reference the procedural steps.

1. Remove the E-Clip from the
retaining pin on the stop.

2. Remove the pin and note the
position of the spacers for
proper re-assembly.

3. Remove the stop from the
frame.

4. Remove the rubber bumper
from the stop.

Status

New

Author

J. Morley

5. Remove the bolts attaching the
side plates, and then remove
the side plates.

6. Install the new side plates to the
frame using the same bolts.

7. Install the rubber bumper to the
new stop.

8. Reposition the stop over the
side plates.

9. Replace the pin. Make sure the
spacers are in the same position
and install E-Clips.

Life Fitness Proprietary and Confidential Information - Only for the Use of the Intended Recipient - Do Not Reproduce or Distribute.

1

10. Remove the seat frame from the main frame.

11. Remove the E-Clips, pins, and seat back from the seat frame.

12. Re-attach the seat back and handle linkage using the pins and E-Clips.

13. Re-attach the seat frame to the main frame using the hardware removed.

Life Fitness Proprietary and Confidential Information - Only for the Use of the Intended Recipient - Do Not Reproduce or Distribute.

2