Life Fitness Lifepulse Digital Heart Rate Sensors User Manual

How To...REMOVE AND REPLACE THE DIGITAL HEART RATE PC BOARD

Tools Required: Phillips screwdriver, pliers

Step 1

Remove the four SCREWS securing the DISPLAY CONSOLE to the DISPLAY CONSOLE BRACKET.

Step 2

Unplug the 16-PIN CONNECTOR and the 3-PIN CONNECTOR from the back of the DISPLAY CONSOLE.

Step 3

Remove the 9-Volt BATTERY from the back of the DISPLAY CONSOLE.

Step 4

Remove the SCREWS securing the back of the DISPLAY CONSOLE to the OVERLAY FACEPLATE. Set the
OVERLAY face down on a non-abrasive, flat surface.

Step 5

Ground yourself to the machine by attaching one end of a DISPOSABLE ANTI-STATIC GROUNDING STRAP to
your wrist and the other to a suitable grounding point on the exercise bike (eg: the metal part of the pedal crank
shaft).

Display Console model
shown for reference only.

Step 6

Use the pliers to squeeze the tips of the five SPACERS, one at a time, to allow removal of the HEART RATE PC
BOARD. Before lifting the HEART RATE PC BOARD from position, be aware that an 8-PIN CONNECTOR is

also securing the back of the board in place.

Step 7

Replace any damaged SPACERS with those included in the kit.

Step 8

Reverse Steps 1 through 6 to replace all parts in their proper positions.

M051-00K46-A026