User & Integration Manual
LifeFitness NFC Card Reader
1.1
13.56 MHz Multi Standard – NFC Reader/Writer Module
User & Integration Manual
Life Fitness NFC Card Reader Module
(C) 2017 Life Fitness Corporation Page 2 of 9
Content
1. Short description ................................................................................................................................. 3
2. Module installation ............................................................................................................................. 4
2.1 Physical dimensions ............................................................................................................................ 4
2.2 NFC Antenna location on PCB .............................................................................................................. 4
3. FCC and RSS compliance statements ................................................................................................... 5
4. FCC and IC information label location.................................................................................................. 6
5. End device labeling instructions .......................................................................................................... 7
6. Revision history ................................................................................................................................... 9
User & Integration Manual
Life Fitness NFC Card Reader Module
(C) 2017 Life Fitness Corporation Page 3 of 9
1. Short description
Power supply
Via host flat-band cable connection 5V (+- 5%)
Operating temperature: 0°C to 60°C
Storage temperature: 0°C to 60°C
Supported 13,56MHz RF standards
▪ ISO/IEC 14443 – ASK modulation
▪ ISO/IEC 15693 – ASK modulation (support depends on used RF frontend derivative)
Host communication (via I2C)
Antenna connection: embedded PCB antenna
Short functional description:
▪ After power-up of the module the NCI NFC controller chip is ready to receive commands via
its I2C application controller (host) interface and performs the related NFC tag interactions
according to the implemented NFC Forum NCI specification
▪ The 13,56Mhz RF field is switched on depending on the commands received.