HAMMER STRENGTH EQUIPMENT
Pads
ILDCP - ISO Lateral Decline Press Rev. C
Movement Arm
Top Frame
Exploded
Assembly
Seat
Frame
Side Frame
1 of 6
HAMMER STRENGTH EQUIPMENT
PART NO.
DESCRIPTION
1/2" Internal Lock Washer
ILDCP - Exploded Assembly
ITEM NO.QTY. PART NO. DESCRIPTION
1 1 ILDCP-FX-0 Front Frame
2 1 ILDCP-CST-0 Seat Frame Assembly
3 1 ILDCP-BX-0 Back Frame
4 1 ILDCP-CSFR-0 Left Side Frame
5 1 ILDCP-CSFL-0 SFL Assembly
6 1 ILDCP-CTX-0 Top Frame Assembly
7 2 H-NONSKID1 1 1/4 X 9 Nonskid
8 1 U16-11 Standard 16" Pad
9 1 U33-19 Standard 33" Pad
10 1 ISO DECLINE PRESS Product Decal
11 1 WARNING SMALL-H Small Warning
ITEM NO. QTY.
12 24 WASH.5STAR
13 12 NUT.5LOCK 1/2" Thick Lock Nut
14 8 H-BACK-WASH Backing Washer
15 10 HHB.5X3 1/2 X 3 Bolt
16 4 NUT.5JAMLOCK 1/2" Thin Lock Nut
17 2 HHB.5X2.5 1/2 X 2 1/2 Bolt
18 8 WASH.375SAE 3/8" SAE Flat Washer
19 6 HHB.375X1.5 3/8 X 1 1/2 Bolt
20 2 HHB.375X2.5 3/8 X 2 1/2 Bolt
21 4 HHB.5X4.5 1/2 X 4 1/2 Bolt
2 of 6
HAMMER STRENGTH EQUIPMENT
PART NO.
DESCRIPTION
ILDCP-MAL-0
1 1/2 X 3 End Cap
H-GRIP(GBTLR2-A00)
ILDCP - Movement Arm
ITEM NO. QTY.
1 1 ILDCP-MAR-0 Right Marm
1 1
2 3 H-PEND3
3 2 ACCORDIAN Shaft Cover
4 2 H-BENDCAP Bullet Cap
5 1 H-RUBRNG MM5 Ring
6 1 SELECTORPIN-4 Selector Pin
8 1 STAY CLEAR Stay Clear Decal
9 1
3 of 6
Left Marm
HandGrip
HAMMER STRENGTH EQUIPMENT
Backing Washer
ILDCP - Top Frame
ITEM NO. QTY. PART NO. DESCRIPTION
1 1 ILDCP-TX-0 Top frame
2 4 H-BEAR-SML Small Bearing
3 8 H-BACK-WASH
4 8 HHB.5X3 1/2 X 3 Bolt
5 8 NUT.5LOCK 1/2" Thick Lock Nut
6 1 ILDCP-CMAR-0 Right Marm Assembly
7 1 ILDCP-CMAL-0 Right Marm Assembly
8 6 H-PEND3 1 1/2 X 3 End Cap
9 2 H-HPLUG 9/16" Hole Plug
10 2 H-NAMEPLATE Name Plate
11 2 STAY CLEAR Stay Clear Decal
12 1 PATENT Patent Decal
4 of 6
HAMMER STRENGTH EQUIPMENT
Left Side Frame
1/2" SAE Flat Washer
1/2" Internal Lock Washer
11ILDCP-SFR-0
ILDCP - Side Frame
ITEM NO. QTY. PART NO. DESCRIPTION
Right Side Frame
1 1 ILDCP-SFL-0
2 1 H-BUMP-MED MM2 Medium
3 2 WASH.5SAE
4 2 NUT.5JAMLOCK 1/2" Thin Lock Nut
5 2 WASH.5STAR
6 2 HHB.5X4.5 1/2 X 4 1/2 Bolt
7 1 H-PEND3 1 1/2 X 3 End Cap
8 8 H-HPLUG 9/16" Hole Plug
9 1 STAY CLEAR Stay Clear Decal
10 1 H-NONSKID1 1 1/4 X 9 Nonskid
5 of 6
HAMMER STRENGTH EQUIPMENT
ILDCP - Seat Frame
ITEM NO. QTY. PART NO. DESCRIPTION
1 1 ILDCP-ST-0 Seat Frame
2 1 H-SEATRCKS Seatrack Front
3 1 H-SEATRCKS-RIB Seatrack Back
4 1 SEAT NUMBER Seat Adj. Number
5 2 HHB.5X2.5 1/2 X 2 1/2 Bolt
6 2 NUT.5JAMLOCK 1/2" Thin Lock Nut
7 1 STD-ST2
8 1 STshft Seat Shaft
9 2 H-LCOLLAR75 3/4" Lock Collar
10 2 H-PEND3 1 1/2 X 3 End Cap
11 2 WASH.375SAE 3/8" SAE Flat Washer
12 1 NUT.375LOCK 3/8" Thick Lock Nut
13 1 HHB.375X4.5 3/8 X 4.5 Bolt
14 1 SERIAL NUMBER Serial Number
6 of 6
Loading...