HAMMER STRENGTH EQUIPMENT
ILBP-V ISO-Lateral Bench Press w/Vertical Handles
Optional Counterbalance
Top Cross Member
Movement Arm
Pads
Exploded
Assembly
Front
Cross
Member
Side Frame Left
Back Cross Member
Seat Assembly
1 of 9
HAMMER STRENGTH EQUIPMENT
ILBP-V Exploded Assembly
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 ILBP-CFX-0 ASSM FRONT CROSSMEMBER
2 1 ILBP-CST-0 ASSM SEAT FRAME
3 18 WASH.5STAR 1/2" Internal Lock Washer
4 3 NUT.5 JAMFINE 1/2" Jam Nut Fine
5 2 HHB.5X2.5 1/2 X 2 1/2 Bolt
6 1 U16-11 Standard 16" Pad
7 2 HHB.37 5X2.5 3/8 X 2 1/2 Bolt
8 8 WASH.375SAE 3/8" SAE Flat Washer
9 6 HHB.37 5X1.5 3/8 X 1 1/2 Bolt
10 1 U33-19 Standard 33" Pad
ITEM NO.QTY.PART NO. DESCRIPTION
11 1 ILBP-CB X-0 ASSM BA C K CRO S S ME MBER
12 13 HHB.5X3 1/2 X 3 Bolt
13 1 ILBP-CSFR-0 ASSM RIGHT SIDE FRAME
14 12 NUT.5LOCK 1/2" Thick Lock Nut
15 12 H-BACK-WASH Backing Washer
16 1 ILBP-CSFL-0 ASSM LEFT SIDE FRAME
17 1 ILBP-CTX-0 ASSM TOP CROSSFRAME
18 1 ILBP-CMARV-0 ASSM RIGHT MOVEMENT ARM
19 1 ILBP-CMALV-0 ASSM MOVEMENT ARM LEFT
2 of 9
HAMMER STRENGTH EQUIPMENT
ILBP-V Movement Arm Left
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 ILBP-MALV-0 MOVEMENT ARM LEFT
2 1 H-BUMP-MED MM2 Medium
3 2 WASH.5SAE 1/2" SAE Flat Washer
4 2 NUT.5LOCK 1/2" Thick Lock Nut
5 2 WASH.5STAR 1/2" Internal Lock Washer
6 2 HHB.5X4.5 1/2 X 4 1/2 Bolt
7 2 H-BENDCAP Bullet Cap
8 1 H-RUBR NG MM5 Ring
9 1 SELECTOR PIN-4 SELECTOR PIN 4 INCH
10 2 ACCORDIAN Shaft Guard
11 1 WARNING LARGE-V Large Warning Vert.
12 1 STAY CLEAR Stay Clear Decal
13 1 H-GRIP(ILBP-V-D00) HandGrip
14 4 H-HPLUG(REG) Hole Plug
15 3 H-PEND3 1 1/2 X 3 End Cap
3 of 9
HAMMER STRENGTH EQUIPMENT
ILBP-V Front Cross-Member
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 ILBP-FX-0 FRONT CROSSMEMBER
2 2 H-NONSKID2 1 3/4 X 9 Nonskid
4 of 9
HAMMER STRENGTH EQUIPMENT
ILBP-V Back Cross-Member
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 ILBP-B X-0 BACK CROSS MEMBER
2 1 WARNING SMALL-H Small Warning Hor.
5 of 9
HAMMER STRENGTH EQUIPMENT
ILBP-V Counterbalance
ITEM NO.QTY.PART NO. DESCRIPTION
2 1 H-BENDCAPBullet Cap
3 1 H-RUBRNG MM5 Ring
4 4 WASH.5STAR1/2" Internal Lock Washer
5 2 NUT.5LOCK 1/2" Thick Lock Nut
6 2 HHB.5X4.5 1/2 X 4 1/2 Bolt
7 1 ILBP-ETC-0 C ounter Balance
6 of 9
HAMMER STRENGTH EQUIPMENT
ILBP-V Side Frame Left
ITEM NO.QTY.P ART NO. DESCRIPTION
1 1 ILBP -S FL - 0 LEFT SIDE FRAM E
2 12 H-HPLUG(REG)Hole Plu g
3 1 STAY CLEAR Stay Clear Decal
4 1 H-NAMEPLATE Name Plate
5 1 H-NONSKID1 1 1/ 4 X 9 Nonsk i d
6 2 H-PEND3 1 1/2 X 3 End Ca p
7 of 9
HAMMER STRENGTH EQUIPMENT
ILBP-V Seat Frame
ITEM NO.QTY.PART NO.
1 1 ILBP-ST-0
2 1 H-SEATRCKS
3 1 H-SEATRCKS-RIB
4 1 SEAT NUMBER
52HHB.5X2.5
62NUT.5JAMFINE
71STD-ST2
81STshft
92H-LCOLLAR75
10 2 H-PEND3
11 2 WASH.375SAE
12 1 NUT.375LOCK
13 1 HHB.375X4.5
14 1 SERIAL NUMBER
8 of 9
DESCRIPTION
SEAT FRAME
Seatrack Fron t
Seatrack Back
Seat Adj. Number
1/2 X 2 1/2 Bolt
1/2" Jam Nut Fine
Standard Seat #2
Seat Shaft
3/4" Lock Coll ar
1 1/2 X 3 End Cap
3/8" SAE Flat Washer
3/8" Thick L oc k Nut
3/8 X 4.5 Bol t
Serial Number
HAMMER STRENGTH EQUIPMENT
ILBP-V Top Cross Member
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 ILBP-TX-0 TOP CROSSMEMBER
2 4 H-BEAR-SML Small Bearing
3 8 H-BACK-WASH Backing Washer
4 8 HHB.5X3 1/2 X 3 Bolt
5 8 NUT.5LOCK 1/2" Thick Lock Nu t
6 2 STAY CLEAR Stay Cle ar Decal
7 2 H-HPLUG(REG)Hole Plug
8 6 H-PEND3 1 1/2 X 3 End Cap
9 of 9
Loading...