Life Fitness Heavy Duty Multi Rack User Manual

HEAVY DUTY MULTI RACK (HDMR)

WARNING:

Read and follow all directions for each step to insure proper assembly of this product.

CLASS SB (Studio): Professional and / or commercial use (Commercial Use Only)
PART #7671101 B-1
DATE: 2/08

2

HAMMER STRENGTH HEAVY DUTY RACKS

SAFETY & WARRANTY

Purchasers of Hammer Strength products should read the Owner's Manual and all of the warning labels on the products
before using them. Because these products may be used in commercial settings, it is the purchaser's responsibility to
instruct all individuals, whether users, trainers or observers, on the proper usage of the equipment. Contact Hammer
Strength if you do not know how to use this equipment.

Hammer Strength recommends that all commercial fitness equipment be used in a supervised area. Hammer Strength
also recommends that the equipment be located in an access controlled area. The extent of control is at the discretion of
the owner.

SECURING EQUIPMENT: All strength equipment must be secured to the floor to a solid, level surface to stabilize and
eliminate rocking or tipping over. This must be performed by a licensed contractor.

Hammer Strength recommends that all users be informed of the following prior to using Hammer Strength equipment:

PROPER USAGE

1. It is imperative that Hammer Strength equipment be used properly to avoid injury. Do not use any equip­ment for purposes other than those specified by the manufacturer.

2. Keep body parts (hands, feet, hair, etc.) and clothing away from moving parts to avoid injury.

3. Injuries may result if you exercise improperly or excessively. It is recommended that all individuals consult a
physician prior to commencing an exercise program. If at any time during exercise you feel faint, dizzy or
experience pain, stop and consult your physician.

4. When adjusting any seat or range of motion limiter, make certain that the adjusting pin is fully engaged in
the hole to avoid injury.

CHECK FOR DAMAGED PARTS

1. DO NOT use or permit the use of any equipment that is damaged or has worn or broken parts. For all
Hammer Strength equipment, use only replacement parts supplied by Hammer Strength.

2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. Labels contain important
information. If unreadable or missing, contact Hammer Strength for a replacement.

3. MAINT AIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment.
Equipment should be inspected at regular intervals. See the Maintenance section of this manual for recom­mended maintenance intervals.

4. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified
to do so. Hammer Strength will provide service and maintenance training at one of its facilities upon request
or in the field if proper arrangements are made.

SPECIFIC OPERATING WARNINGS

1. UNDERSTANDING THE FULL EXTENT OF EACH AND EVERY WARNING IS IMPORTANT. IF ANY WARN­ING IS UNCLEAR, ASK HAMMER STRENGTH PERSONNEL FOR CLARIFICATION.

2. Keep children away from strength equipment.

3. Use only olympic style weight plates (2.0" Bore) for training weight. Only add weight up to the load limits of
the unit and that can be fully placed on the weight horn. Contact a Hammer Strength representative with any
questions regarding proper weights and loading.

3

WARNING

SERIOUS INJURY CAN OCCUR

ON THIS EQUIPMENT. YOU MUST

FOLLOW THESE PRECAUTIONS

TO AVOID INJURY!

1. Before using, read all the warnings
and obtain instruction on the use of this
machine. Use only for intended exercise.
DO NOT modify the equipment.

2. Obtain a medical exam before
beginning any exercise program.

3. Keep body and clothing free of all
moving objects.

4. Inspect equipment daily. Tighten all
loose connections, and replace worn
parts immediately. DO NOT use if it
appears damaged.

5. Children must not be allowed near this
machine. Supervise teenagers.

6. DO NOT REMOVE THIS LABEL.
REPLACE IF DAMAGED.

This exercise
machine is covered by one or
more of the following U.S.
patents:
5,135,449;
D321,391;
5,100,080;
5,171,198;
5,273,505;
5,181,896;
and other patents pending.

5,044,631;
D321,026;
5,006,004;
D321,390;
5,180,354;
5,273,504;
5,050,873;

D321,027;
5,066,003;
D321,389;
5,135,456;
D321,387;
5,125,881;
6,203,474B1

HAMMER/STRENGTH

MACHINE # MODEL SERIAL #

MACHINE WARRANTY VOID IF TAG REMOVED

MFG. & DESIGN BY

GARY JONES & THE TROOPS

For Service Call Life Fitness 800-351-3737

4

LIMITED WARRANTY

WHAT IS COVERED

This Hammer Strength commercial exercise equipment (Signature Benches and Racks) is warranted to be free of all
defects in material and workmanship to the original purchaser for the specific items and duration listed:

O 10 years on structural frame
O 1 year on grips
O 1 year for rust or corrosion of structural frame. Scratches or scrapes where the subsurface of the unit has been

exposed must have been properly repaired by the customer.

O 90 days on upholstery and any items not specified (including labor).

Hammer Strength will ship to you at our expense, any repair parts covered by the warranty as stated. If the Product is
deemed not repairable by Hammer Strength authorized personnel, we reserve the right to replace any part or the entire
Product at our option within the stated warranty period.

WHAT IS NOT COVERED

Any failures or damage caused by unauthorized service, misuse, accident, negligence, improper assembly or installation,
debris resulting from construction activities in the vicinity of the Product, any alterations or modifications made to the
Product without written authorization by Hammer Strength, or by failure on your part to use, operate, and maintain the
Product as set out in your Operation Manual. All terms of this warranty are void if this product is moved beyond the conti­nental borders of North America (excluding Hawaii) and are then subject to the terms provided by that country's autho­rized Hammer Strength Representative.

TRANSPORTATION & INSURANCE FOR SERVICE

If the Product or any covered part must be returned to a service facility for repairs, Hammer Strength will pay all trans­portation and insurance charges for the first year. You are responsible for transportation and insurance charges for year
2 and beyond.

HOW TO GET PARTS & SERVICE

Simply call Customer Support Services at [phone] or [phone], Monday through Friday from 8:00 a.m. to
6:00 p.m. Central Standard Time, and tell them your name, address and the serial number of your Product. They will tell
you how to get a replacement part, or, if necessary, arrange for service where your Product is located or advise you on
how and where to ship the Product for service. Before shipping:

1. Obtain a Return Authorization Number (RA#) from Customer Support Services

2. Securely pack your Product (use the original shipping carton, if possible)

3. Write the RA# on the outside of the carton

4. Insure the Product, and

5. Include a letter explaining the defect or problem and a copy of your proof of purchase if you believe the service

is covered by warranty

Life Fitness World Headquarters
Attn: CSS Help Desk

5100 N. River Rd.
Schiller Park, IL. 60176

5

LIMITED WARRANTY

EXCLUSIVE WARRANTY

THIS LIMITED WARRANTY IS IN LIEU OF ALLOTHER WARRANTIES OF ANY KIND EITHER EXPRESSED OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR APARTICULAR PURPOSE, AND ALLOTHER OBLIGATIONS OR LIABILITIES ON OUR PART. We neither
assume nor authorize any person to assume for us any other obligation or liability concerning the sale of this Product.
Under no circumstances shall we be liable under this warranty, or otherwise, for any damage to any person or property,
including any lost profits or lost savings, for any special, indirect, secondary, incidental or consequential damages of any
nature arising out of the use of or inability to use this Product. Some states do not allow the exclusion or limitation of
implied warranties or of liability for incidental or consequential damages, so the above limitations or exclusions may not
apply to you.

CHANGES IN WARRANTY NOT AUTHORIZED

No one is authorized to change, modify or extend the terms of this limited warranty.

EFFECT OF STATE LAWS

This warranty gives you specific legal rights and you may have other rights, which vary, from state to state.

OUR PLEDGE TO YOU

Our Products are designed and manufactured to the highest standards.
We want you completely satisfied with our Products and will do everything possible under the terms of this warranty to

keep you secure in knowing you have bought the best!

1. Frame Construction: Frame is constructed of mechanical quality steel purchased in mill run quantities. Frame is pri-
marily 3" x 3" square shaped tubing and 3” x 2” shaped tubing with 7 gauge and 11 gauge wall thickness.

2. Frame Finish: The frames are coated with an electrostatic epoxy powder coat finish.

3. Bolts: Most hardware is English and has a corrosion resistant finish. Grade 5 or greater in strength.

4. Equipment Anchoring: All machines have holes in the feet, these allow easy anchoring to the floor. Life Fitness rec-

ommends that all machines be anchored to the floor to minimize the possibility of tipping.

5. Liability Insurance: Certificate of insurance available upon request.

HEAVY DUTY MULTI RACK Product #-HDMR8
Machine Weight: 620 lbs. (281 kgs.)
Size: 76.5” L (193 cm) x 66” W (168 cm) x 97” H (246 cm)
Live Area: 76.5” L (193 cm) x 120” W (305 cm) x 105” H (267 cm)
Max Training Weight: 855 lbs. (388 kgs.)

HEAVY DUTY MULTI RACK Product #-HDMR9
Machine Weight: 632 lbs. (286 kgs.)
Size: 76.5” L (193 cm) x 66” W (168 cm) x 109” H (277 cm)
Live Area: 76.5” L (193 cm) x 120” W (305 cm) x 117” H (297 cm)
Max Training Weight: 855 lbs. (388 kgs.)