220 GYM SYSTEM ADDENDUM INSTRUCTIONS
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901
PLEASE FOLLOW THESE INSTRUCTIONS T O ASSEMBLE
THE PRESS ARM PIVOT SPACER TO THE PRESS HANDLE.
1
PART #
7258801
KEY
!! IMPOR T ANT !!
P ARTS LIST
DESCRIPTION
PRESS ARM PIVOT SPACER
PRESS ARM
QTY
2
1/2” FLANGE
BEARINGS
1
ROLL
PIN
3/8” LOCK NUT
PRESS HANDLE
FIGURE 1
STEP 1:
• CARELFULLY remove the LEFT PRESS HANDLE, two 1/2” FLANGE BEARINGS, one 3/8” WASHER, and one 3/8” LOCK NUT
from the PRESS ARM (8) as shown in FIGURE 1.
• Slide one PRESS ARM PIVOT SPACER (1) over the ROLL PIN on LEFT PRESS HANDLE as shown in FIGURE 1.
• Assemble the LEFT PRESS HANDLE, two 1/2” FLANGE BEARINGS, one 3/8” WASHER and one 3/8” LOCK NUT to the PRESS
ARM as shown in FIGURE 1. (IMPORTANT! Do not overtighten! PRESS HANDLE should rotate freely .)
• Repeat STEP 1 to assemble the PRESS ARM PIVOT SPACER (1) to the RIGHT PRESS HANDLE.
Part #7282301
1
Revision: 4/25/02
Rev A.