Life Fitness GS2 User Manual

LEG PRESS ADAPTER KIT
FOR GS1/GS2 GYM SYSTEM

WARNING:

Read and follow all directions
for each step to insure proper
assembly of this product.

CLASS H
PAR T # 7358101
REV. A

USER’S GUIDE

1

Version: GS1-LP5A-101
Revision: 11/01/02

j

TABLE OF CONTENTS

Safety Statement.............2

General Notes..................3

Tools Required................3

Parts list..........................4

Assembly Instructions.....4-13

Insert-Registration Card

IMPORTANT SAFETY INFORMATION

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions
on the use of this machine. Use only for intended
exercise. DO NOT modify the machine.

2. Obtain a medical exam before beginning any
exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use. DO NOT use it if it
appears damaged. DO NOT attempt to fix a broken or

ammed machine. Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.

6. Never pin the weights or prop plate into an elevated
position. DO NOT use the machine if found in this
condition. DO NOT attempt to fix. Notify your
authorized ParaBody dealer.

7. Inspect cables and their connections before using
machine. Pay particular attention to the cable ends.
DO NOT attempt to fix. Notify your authorized
ParaBody dealer before use and have repairs made by
an authorized service technician.

8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.

5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer. If
unsure, call your authorized ParaBody dealer.

9. Children must not be allowed near this machine.
Supervise teenagers.

.

NOTE: In a continual effort to improve our products, specifications are subject to change
2002 Life Fitness, a division of Brunswick Corporation. All rights reserved.

©

ParaBody is a trademark of Brunswick Corporation

www.parabody.com

2

IMPORTANT NOTES

Please note:

* Thank you for purchasing the ParaBody GS1/ GS2 Leg Press Adapter Kit. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.

* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.

Tools Required for Assembly

* 9/16” wrench
* Ratchet with 9/16” socket
* Adjustable wrench
* T ape measure

Bolt Length Ruler

NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT .

BOLT LENGTH

BOLT LENGTH RULER:

1/2 1/2 1/2 1/2 1/2 1/2

0

1

2

345

3

6

PARTS LIST

KEY

1
2
3
4
5
6
7

NOTE: The LEG PRESS ATTACHMENT (LP5) must be assembled before connecting it to the PARABODY GS1/GS2 GYM

PART #

ACU04-1450
ACU13-0140
ACU06-0024

ACU06-0362
ACUDC1250100020B
ACUDB2E03811000B

ACUDA1E03813416NB

SYSTEMS

DESCRIPTION

FRONT LEG

LEG PRESS CABLE

3-1/2” PULLEY

2” COVER CAP

3/8” W ASHER

3/8” LOCKNUT

3/8 X 1-3/4” BOL T

QTY

1
1
7
1
9

14

3

KEY

8

9
10
11
12
13
14

PART #

ACUDA1E03823416NB
ACUDA1E03840016NB
ACUDA1E03843416NB

ACU08-0085
ACU08-0076
ACU08-0079
ACU02-0055

DESCRIPTION

3/8 X 2-3/4” BOL T

3/8 X 4” BOL T

3/8 X 4-3/4” BOL T

STEP SP ACER 19/32” LG
STEP SP ACER 1-19/32” LG
STEP SP ACER 1-11/16” LG

CABLE L CLIP

QTY

4
2
5
4
4
2
1

FIGURE 1

DISCARD!
CABLE

STEP 1:

• Remove the bolts attaching the FRAME BRACE and CABLE to the BASE as shown in figure 1

• Remove and discard the LEG CABLE by removing the bolts shown in FIGURE 1.

4