Lifebreath 195ECM User Manual

Date: ___________________________________________

Tag: _____________________Qty:___________________

Project: _________________________________________

Engineer: _______________________________________

Contractor: ______________________________________

Supplier: ________________________________________

Quote#: _________________________________________

Submitted by: ____________________________________

ENGINEERING DAT A

THERMALLY CONDUCTIVE,PATENTED ALUMINUM CORE

The cross-flow heat recovery core transfers heat between the two airstreams. The two cores are arranged for highly efficient counter current airflow.

MOTORS AND BLOWERS

Each air stream has one centrifugal blower driven by a common ECM motor. 5 speed fan operation. 120 VAC, 1.4 Amps.

FILTERS

Washable air filters in exhaust and supply air streams.

MOUNTING THE HRV

Four threaded inserts at corners of case designed to accept four reinforced polyester straps that are supplied with the unit.

DEFROST

Damper defrost system.

DEHUMIDISTAT

Adjustable Internal Dehumidistat.

CASE

Twenty gauge prepainted galvanized steel (G60) for superior corrosion resistance. Insulated to prevent exterior condensation. Drain connections 2 - 1/2" (12 mm) OD.

CONTROLS

ControlAir 15 - Standby/ON mode, 20 ON/ 40 OFF mode (each mode has 5 speeds). Control pad can be removed from HRV and remotely mounted.

Weight 106 lbs. (48 kg) Shipping Weight 108 lbs. (49 kg)

All units conform to CSA and UL standards.

Model 195ECM

DIMENSIONS 195ECM inches (mm)

*Sensible Efficiency – thermal **Latent Efficiency – moisture

Note: Effectiveness - based on temp. differential between the 2 airstreams Efficiency – takes into account all power inputs

Performance

Net supply air flow in cfm (L/s) against external static pressure

E.S.P

(external static pressure) [cfm (L/s)]

@ 0.1" (25 Pa) 171 (81)

@ 0.2" (50 Pa) 164 (77)

@ 0.3" (75 Pa) 156 (74)

@ 0.4" (100 Pa) 143 (67)

@ 0.5" (125 Pa) 134 (63)

@ 0.6" (150 Pa) 126 (59)

@ 0.7" (175 Pa) 119 (56)

Max. Temperature Recovery 88%

Sensible Effectiveness @ 114 cfm (54 L/s) 32°F (0°C) 88%

*Sensible Efficiency @ 114 cfm (54 L/s) 32°F (0°C) 81%

*Sensible Efficiency @ 119 cfm (56 L/s) -13°F (-25°C) 77%

VAC @ 60HZ 120

WATTS / Low speed 34

WATTS / High speed 95

Amp rating 1.4

OPTIONAL MAIN CONTROLS 99-350 Lifestyle Ventilation Control 7/24 programmable ventilation, (3 wire) 20

gauge wire (min.) 100’ length

99-109 Air Sentry Air Quality Monitor designed to accept remotely mounted

Control Pad, (3 wire) 20 gauge wire (min.) 100’ length

99-250 Ventilation Dehumidistat designed to accept remotely mounted Control

Pad, (4 wire) 20 gauge wire (min.) 100’ length

OPTIONAL TIMERS 99-104 Digital Electronic Timer - initiates high speed ventilation for 20, 40 or 60

minutes, (3 wire) 20 gauge wire (min.) 100’ length

99-101 Crank Timer - Initiates high speed ventilation for up to 60 minutes, (2 wire)

20 gauge wire (min.) 100’ length

OPTIONAL ACCESSORIES 99-163 Duct Heater w/ Electronic SCR Thermostat, 1 Kw, 6” (150 mm)

99-164 Duct Heater w/ Electronic SCR Thermostat, 2 Kw, 6” (150 mm) 99-185 Weatherhoods, Two - 6” (150 mm) c/w 1/4” (6 mm) mesh screen WARRANTY

Units carry a LIFETIME warranty on the heat recovery core anda5yearreplacement parts warranty.

TI-195ECM

STALE AIR

TO OUTSIDE

METAL CLASPS

FILTER

MOTOR

STALE AIR

FROM INSIDE

220

200

180

160

140

120

100

Air Flow (cfm)

0 0.1 0.2 0.3 0.4 0.5 0.6 0 .7 0.8

Static Pressure (in w.g.)

Por ts

6" (150 mm)

FILTER

FRESH AIR

FROM OUTSIDE

DEFROST

DAMPER

DEFROST AIR FROM INSIDE

CONDENSATE

DRAINS

49 "

(1245)

Por ts

7" (178 mm)

BLOWERS

FRESH AIR

TO INSIDE

*NOTE: Front clearance of 25 inches (635 mm) is recommended for servicing unit.

ATTENTION

19"

(483)

14 3/4"

(375)

The ECM motor produces a tone that some may find objectionable. We recommend the installation of the optional 99-SILENCER6 on the ‘Stale Air from Inside’ and ‘Fresh Air to Inside’ ducts.