4
You MUST disconnect the power supply and
turn off the air purier before cleaning.
Do NOT wash the collector in the dishwasher.
Do NOT use cleaning products that contain
alcohol solutions, ammonia, or alkaline
substances, as these products may damage
the air purier.
The collector should be cleaned approx.
once every two weeks or when needed. The
collector may require more frequent cleaning if used in highly contaminated environments.
Cleaning the collector:
1. Clean the collector with washing-up liquid,
water, and a soft sponge.
2. Dry the collector with a dish towel.
3. Put the collector back on the ion generator
according to the above instructions.
If you have followed the above instructions
but the collector is still not clean, try the
following:
1. Spray detergent onto the collector and let
it work for 5 minutes.
2. Use a damp sponge and rub any
remaining spots until they disappear.
3. Dry the collector with a dish towel and
place it back on the ion generator
according to the above instructions.
4. Repeat the above procedure if necessary.
ENGLISH
CLEANING AND MAINTENANCE
PRODUCT DESCRIPTION
IonFlow 500, Signature & Evolution:
1 ion generator (above= 3 corona needles, below=outlet and metal hook)
1 particle collector
1 acrylic stand
1 switch
1 transformer
4 decorative lights
1 protective guard (32 slats and 2 assembly rings)
1 corona needle brush