Lifan lf200 III Owner's Manual
PREFACE
The manual describes the basic operation and maintenance for the motorcycle,which should be read carefully before driving. Correctly use, service and
maintenance can keep on a safe driving so as to minimize troubles of the
usage . our service station can
The data in the manual is the latest .we reserve the right to amend the data, instructions and specifications without advice.If this handbook is different
from the actual motorcycle status ,please do as practical.
Thank you for your purchasing our motorcycle. May you enjoy the driving all the time.
IMPORTANT BULLETIN
Driver and passenger
The motorcycle can carry drivers and one passenger ,whose max loading is 150kg. the rear luggage carrier forbidden to overload 5kg. please read carefully
the handbook.
DRIVING ROAD SURFACE
This motorcycle only apply to drive on the road.
CUSTOMERS MUST CAREFULLY READ THIS HANDBOOK
Especially take note of quoting contents as follows:
DANGER: if anybody does not obey this instruction ,it will cause serious casualty accidents
WARNING: if anybody does not obey this instruction, it will lead to casualty injury and device damages
REMARKS:OFFERING HELPFUL INFORMATION
This manual forms a integral part of the motorcyclye,transferring with the manual attached
motorcycle and keep it at an optimal performance, which can extend the period of
provide technical inquiry and after-sale service.
CONTENTS
SAFE DRIVING OF THE MOTORCYCLE .................................................. 2
SAFE DRIVING RULES ............................................................................... 2
PROTECTIVE DEVICE ................................................................................ 2
CHANGING APPEARANCE OF THE VEHICLE ........................................ 2
LOADING OF THE GOODS ......................................................................... 2
PARTS ............................................................................................................ 3
USING INSTRUCTIONS .............................................................................. 3
POSITION OF PARTS ................................................................................... 3
VIN OF THE MOTORCYCLE ...................................................................... 4
FUNCTION OF THE PARTS ........................................................................ 4
LOCK OF THE HEAD OF THE MOTORCYCLE ....................................... 4
SWITCH OF LEFT HANDLEBAR ............................................................... 4
SWITCH OF RIGHT HANDLEBAR ............................................................ 4
SWITCH OF THE FUEL TANK AND THE COVER
OF THE FUEL TANK AND THE FUEL ..................................................... 5
OPTION OF THE FUEL AND LUBRICATION ........................................... 5
TYRES ........................................................................................................... 6
OPERATION GUIDELINES ........................................................................ 6
INSPECTING ITEMS BEFORE DRIVING .................................................. 6
STARTING OF THE ENGINE ....................................................................... 7
BREAK-IN OF THE ENGINE ....................................................................... 7
DRIVING OF THE ENGINE ......................................................................... 7
BRAKE AND STOPPING OF THE MOTORCYCLE .................................. 8
MAINTENANCE AND PROTECTION ........................................................ 8
INSPECTING AND CHANGING OF LUBRICATION ................................ 8
CLEARANCE OF ACCUMULATED CARBON .......................................... 9
OPTION AND CHANGING OF SPARK PLUG ............................................ 9
WASHING AND ASSEMBLING OF AIR FILTER ....................................... 9
WASHING AND ASSEMBLING
OF FUEL SWITCH FILERING NET ............................................................ 10
INSPECTING OF LEAKAGE OF GAS PASSAGE ...................................... 10
OPERATION AND INSPECTION AND
ADJUSTING OF THE THROTTLE .............................................................. 10
IDLE SPEED OF CARBURETOR OF ADJUSTING ................................... 10
CLUTCH ADJUSTING ................................................................................. 10
INSPECTING AND ADJUSTING AND
LUBRICATING OF THE DRIVING CHAIN .............................................. 11
INSPECTING OF FRONT SHOCK ABSORBER ........................................ 11
INSPECTING OF REAR SHOCK ABSORBER .......................................... 11
INSPECTING AND ADJUSTING OF FRONT BRAKE ............................... 11
INSPECTING AND ADJUSTING OF REAR BRAKE ................................. 12
ADJUSTING OF THE SWITCH OF THE BRAKE LIGHT .......................... 12
MAINTENANCE AND CHANGING OF THE SILENCER ......................... 12
WORKING PRINCIPLE OF THREE ELEMENTS CALALYST
TRANSMISSION (OPTION LOADING PRODUCTS ) .............................. 12
PROTECTION OF BATTERY ...................................................................... 13
USING INSTRUCTION OF FUSE OVERFLOWING PROTECTOR .......... 13
TOOL KITS ................................................................................................... 13
INSTRUCTION OF THE BUMPER
(OPTION LOADING PRODUCTS ) ............................................................. 14
FAILURE CHECKING /REPAIRING ........................................................... 14
WASHING AND KEEPING .......................................................................... 14
USING AFTER KEEPING ............................................................................ 15
MAINTENANCE SCHEDULE ..................................................................... 15
ELECTRIC DIAGRAM ................................................................................. 16
SPECIFICATIONS ........................................................................................ 17
1
WARNING:
To prevent casualty and device damages, driving the motorcycle while mus t take
note of the traffic security.
Can not drive until the motorcycle check carefully
SAFE DRIVING RULES
1.before starting, mus t check the vehicle. Tak e no te of checkin g all kin ds of fasteners,
connecting parts and adjusting part s whethe r b e fit so th at c an prev ent against
accidents and avoiding device damages.
2.motorcycle drivers must pas t traffi c administratio n examinatio n an d gain driving
license till can drive it. forbiddin g t o borro w th e motorcyc le to ha ve no license
personnel driving.
3.to avoid causing casualty accidents t o yo u an d oth er people,special ly ke ep an eye
on several points given below:
(1).wearing bright clothes
(2).keep a certain distance with other vehicles, correctl y us e th e ligh ts an d ho rn of
the vehicle etc signal devices.
(3).no pulling ahead
(4) strictly obey traffic regulations all over the country.
(5)forbidding to over-speed driving. spee d nev er exce ed t he limitati on scope.
(6)when turning and diversion, correctly us e winke r s o as to bri ng to oth er drivers
attention.
(7)taking special care of driving on the entry and exi t o f th e crossroa d an d parking
and on the road.
(8)when driving ,driver s grap a t th e steeringba r an d tre ad w ith f eet on the footrest
comp.
(9)in the rainy weather driving must be remember: brake distance i s tw o time s o f the
cloudy weather. when driving, tak especia l car eo f dam p roa d surface wi th ho le and
oil spot. when no understanding traffic status, shoul d slow down .
PROTECTIVE DEVICE
to guarantee your security driving, you should put on a helmet, dus t hoo d an d face
shield and gloves etc.protective tools.
the silencer of the motorcycle is the part of the higher temperature , to avoid con-
tacting burn,when driving, mus t wea rboot so r th e dres s o f coverin g leg. no wear-
ing loose clothes which may be easily hooked by the operation handlebar, kick rod,
footrest comp and wheel.
CHANGING APPEARANCE OF THE VEHICLE
WARNING:freely alter motorcycles or change original devices, which can
not guarantee motorcycles driving security, is illegal, use r mus t obey traffic
administration regulations to use vehicles.
If you have a good suggestion,can send away from us.don t a pproval o f i t u ntil
you can alter this vehicle, otherwise you hav e brough t a ll consequences o n
yourself.
GOODS LOADING
REMARKS:the itemizing of the loading quality has certain demands: good s loading
will not affect the performance and stability of the vehicle
the gravitational core of goods should lie low-place alongside close to the core of
the vehicle.loading weight is split in two sides which tries to keep balance. whe n the
gravitational core is farther away, th e gravitationa l cor e o f th e vehicle,whic h will
have an effect on the vehicle operation.
in the light of the circumstances of loading weight and driving,and then properly
adjust the air pressure of tyres and front shock absorber and rear shock absorber
all goods must fix stoutly on the vehicle for guaranteeing the operation stability.
no attaching bulk and over-weight items on the steering-bar and front fork and
fenders, otherwise wil l cause driving unevenly o r steerin g n o sensitivity
no over-loading (max loading 150kg)
2
ACCESSORIES :
our producing accessories went through special designing and passed testing on the motorcycle. being it is impossible for us to test all other factories products ,and so if no
selecting our components ,resettling and using that you will allow for yourself .please you comply with safe driving regulations and o bey t he f ollowings everalp oints:
carefully check components, no hindering sight, lessening clearance ground and side leaning angle,limiting suspension and steering structure shifting ,limiting and
controlling operation
no resettling the cooling device of the generator
no adding electrical equipment,if do so , which will make your motorcycle electric volume over-loading so that could lead to circuit turning off ,flashing system cut off or
engine stalling .
LOCATION OF THE PARTS (FIG.1-3)
(1)rear wheel (2)silencer (3)rear footrest right(4)front footrest right
(5)rear brake pull rod(6)rear ring board right (7)right down guide hood
(8)front wheel (9)front disc brake (10)front shock absorber right
(11)front fender (12)front sheering light right (13)kick rod
3
(1)headlight (2)headlight hood (3)left down guide hood (4)front guide hood (5)meter
(6)rear view mirror (7)fuel tank (8)seat cushion (9)left rear ring board (10)rear handlebar
(11)tail light guard plate (12)rear mudguard (13)front left sheering light
(14)front left shock absorber (15)flexiable shaft of the speedometer
(16)gearshift pedal (17)side stand (18) main stand (19)front footrest left
(20)rear footrest left (21)chain box (22)chain (23)rear fork (24)rear light
FIG.1
11
12
13
14 15 16
17
18 19 20 21 22 23 24
FIG.2
11
12
13
(1)left handlebar
(2)left handlebar switch
(3)meter
(4)ignition switch
(5)right handlebar switch
(6)right handlebar
VIN OF THE MOTORCYCLE (FIG.4-6)
motorcycle vin engine number frame body nameplate
Engine code:
Please fill in vehicle vin and engine number in the offering blank place ,which will
help you order spareparts to us or when vehicle stolen , which will be used to inquiry
(THE LOCATION OF VIN)
1) vehicle vin printed on the right side of steering pipe of the frame body (FIG4)
2) engine number printed on the left down side of the camshaft box of the engine(FIG5)
3) the nameplate of the framebody fixed on the left side of the frame body steering pipe (FIG6)
FUNCTION OF THE PARTS
METER AND INDICATOR (FIG7)
(1) speedometer
(2) tachometer
(3) fuel meter
IGNITION SWITCH (FIG8)
ignition switch resettled on the connecting plate .ignition switch key has two posi-
tions and
off: when th e k ey is off circuit is of f ,
engine can t s tart ,the k ey c an t ake o ut
on: when t he k ey i s on , circuit is o n ,
engine can start , the key can not take out
LOCK OF THE HEAD OF THE MOTORCYCLE (FIG9)
If need lock the head of the vehicle ,make handlebar turn left
to the limitation patch of the lock core of the vehicle head
and stand of the frame body overlapped .insert the key into
lock core ,according to counterclockwise rotating the key ,
make sure the head of the vehicle locked ,and then take out
the key.
If need let the lock loose , according to the opposite sequence going on the above
procedures.
SWITCH OF THE LEFT HANDLEBAR(FIG10-1)
SWITCH OF THE CHANGING ILLUMINATION
position : switcho f t he c hanging i llumination i s t he
position ,far-light of the headlight comp is on .
position: switch o f th e c hangingil lumination is th e
position, near-light of the headlight comp is on.
SWITCH OF THE SHEERING FLARE
position :when turn left ,move the switch to the
position ,left sheering flare is shine
position : whent urn r ight ,move t he s witch t o t he
position, right sheering flare is shine
position: after n ormal d riving o r t urning ,keep t he p o-
sition of the switch, left and right sheering light are off.
HORN SWITCH
press the switch horn b laring .
RIGHT HANDLEBAR SWITCH (FIG10-2)
LIGHT CONTROLLING SWITCH
Fig.3
Fig.3
Fig.4 Fig.5 Fig.6
VIN:
Fig.7
Fig.10-1
Horn switch
Turn signal switch
Emergency switch
Starter button Light switch
Fig.10-2
Fig.9 Steering lock
Headlight dimmer
Ignition switch
Fig.8
4
Loading...