Lifa Air LA352, LA502 User Manual

IB-200-LA3520-02 V1.2

LA352 Smart Air Purifier

Please read the user manual before using the product, and do keep securely for future reference.

Warning: Before first time use, you must take out all HEPA filters and remove the moisture-proof protective bag on the activated carbon plates(4 pieces).

International Limited

Manufactured by Dongguan LIFAair Technology Ltd.
Address: No. 2, East Industry Road, Songshan Lake Science &
Technology Industrial Park, Dongguan, 523808, CHINA
www.lifaair.com Designed in Finland

x4

Air purifier main unit x1
Activated Carbon Plates X4
HEPA filter x1
Smart controller x1
Power cord x1

Packing List

Power adapter (for smart controller)

HEPA filter
(for use inside main unit)

Smart controller

Smart controller charging cable

Power adapter (for air purifier)

Activated carbon plates
(for use inside main unit)

Air purifier main unit

Power cord

Instruction manual /
Certificate

Instruction manual / Certificate x1
Power adapter (for air purifier) x1
Power adapter (for smart controller) x1
Smart controller charging cable x1

English

EN · Preface

Power warning:

y Place the product near the power outlet.
y Before use, make sure that the operating voltage is the same as your local

power supply. Correct operating voltage can be found on the product plate.
y For safety purpose, unplug the product during lightning storms or when
unused for extended periods of time.
y Under normal conditions, the power supply may get hot. Please keep good
ventilation in the area and exercise caution.

Thank you for selecting LIFAair! You are about to enjoy superior Finnish technology and innovation for quality living.

Important safety information

This symbol is to alert the user to the presence of un-insulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to per sons.

This symbol is to warn the user not to disassemble the enclosure of
the product and there is no user-replaceable part inside. Take the
product to an authorized service center for repair.

This symbol indicates that the product is for indoor use only.

y Safety warning labels on the housing or bottom of the product or power
adaptor.

WARNING!
Danger of explosion if the battery is incorrectly replaced. Replace only with
the same or equivalent type.
For products with removable battery, the battery must be properly recycled
or disposed. For products with built-in battery, disassembling is prohibited.
Never disassemble, hit with force, squeeze batteries or dispose of batteries
in fire. Do not expose batteries in conductive materials, liquid, fire or heat.
Do not let metal object contact two battery poles. If the batter y looks
swollen, leaking, discolored, having odor or any abnormal appearance,
stop using it. Do not use the battery after immersed in water.
Improper use of battery may lead to explosion or leakage, causing skin
burn or other injuries; in the event of batter y leakage, handle it with care
and immediately dispose of the battery in the manner in compliance with
applicable laws and regulations in your locality.

For wireless product:

1.

Wireless product may generate shortwave radio fr equencies and interfere

with the normal use of other electronic de vices or medical equipment.

2. Turn off the product when it’s disallowed. Do not use the product in
medical facilities, on airplane, at gas stations, near automatic gates,
automatic fire alarm system or other automated devices.

3. Do not use the product in the vicinity of a pacemaker within a 20cm
range. The radio waves may affect the normal operation of the
pacemaker or other medical devices.

y Only use attachments/accessories provided by the manufacturer.
y Keep the machine away from children to avoid accidents.
y Do not block any ventilation openings. Install the machine in

accordance with the manufacturer’s instructions.
y Make sure the machine stands in the upright position, never operate
the machine when in other orientations.
y

Unplug the machine when it is not being used for a long period of time.
y Do not use this machine in rooms with large temperature differences
to avoid water condensation inside.

y Protect the power cord from being walked on or pinched .
y Please switch off and unplug the machine befor e moving it or

cleaning and/or replacing the filters.
y Do not use this machine in high temperature and/or humidity
environments, such as bathrooms.
y Never open the power adapter to avoid electric shock and impact
on warranty.
y

For user safety and product protection, do not sit or lean on the machine.
y

Do not put objects into the movable portion, the air inlet and/or outlet.
y Do not place the product directly under air conditioning units to
prevent condensed water droplets.
y With the exception of professional maintenance personnel, please do
not attempt to repair the product.
y To prevent electric shocks, be sure to follow the requirements of the
method and manner of this manual for cleaning and maintaining the
product. Please do not try to maintain the product in any other way.
y Please ensure that the machine is used only with the power supply
unit provided with the appliance.

Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over

Correct disposal of this product. This marking indicates that this
product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return
and collection systems or contact the retailer where the product
was purchased. They can take this product for environmental
safe recycling.

Safety marking label of main unit is on the bottom plate of the product.

Remove the bottom cover.

2

4

3

3

6

5

1

Initial Installation

Cover the ground with a layer of soft towel or any protective pad, flip the main unit upside
down while rotating bottom cover to unlock (Make sure that DC power is turned off).

Hold the top of filter by two hands and lift to remove. Take out the 4-piece activated carbon plates inside the main unit (Remove the

carbon plate after pressing down the buckle with finger - see diagram).

Remove the moisture proof plastic bag on the carbon plates. Replace the 4-piece carbon plate into the main unit (Please make sure the

two extensions on the bottom of carbon plate match the grooves on the main unit).

S/N：XXXXXXXXXXX CODE:XXXXXX

①

②

③

④

⑤

Function Description

Main unit

Smart Controller

Pairing

Increase

Decrease

Light is steady: operating mode

① Touch control Surface: To change wind speed and enter
into pairing mode.

② Working status / power indicator

③ air intake
④ DC power connector (connect to the power adapter)
⑤ bottom cover

Smart controller not connected

Green light slowly flashing: standby mode

Green light flashing: response touch control

Green light rapid flashing: pairing with controller

Green light remains steady: operating mode

Smart controller is connected

White light slowly flashing: standby mode

White light flashing: response touch control

Note: Do not block the air infake and exhaust area, pad made by plush fabrics class will clog the exhaust area.

① Light sensor: brightness of display automatically adjusts according
to ambient brightness.
② On / off key: Long press: switch on/off short press: display time,
switch off / on the screen

③ Air suction inlet: Where air is suctioned into Smart controller
④ PM2.5 sensor air inlet
⑤ Power connector: dedicated charging power cable

⑥ Serial Number: serial number of Smar t controller (retain for warranty purpose)

Code: Device identification code is used to unlock remote control function in LIFAair APP.
Search Smart controller within LIFAair APP, click icon of controller and input this
code to open remote control function within LIFAair APP.
Note: 1) This code is not case-sensitive

2) This code is the last six digits of your device’s MAC address.
⑦ Air exhaust outlet: Smart controller air exhaust

English English