5. USE ........................................................................................................................................................................ 9
5.1. CONNECTING AND DISCONNECTING THE POKER VIBRATOR ................................................................................................... 9
5.3. USE ........................................................................................................................................................................ 10
5.4. APPLICATION EXAMPLE ............................................................................................................................................... 10
9. PART LISTS ........................................................................................................................................................... 16
10. DECLARATION OF CONFORMITY ........................................................................................................................ 20
All rights are reserved. Reprints, copies, adaptations for new editions and publications in any form or
through any media, including abstract forms are not permitted unless written permissions is first
obtained from Lievers Holland.
Lievers Holland may not be held responsible for any guarantees or liabilities for the contents of this
publication and points to, in this case, all implied securities for suitability of merchantability or any other
purposes. Lievers Holland further retains the right to revise this publication and to alter the contents
over certain periods of time, without the obligation to report such alterations and changes first.
This manual has been written to help you operate and maintain the poker vibrator P14E safely.
This manual is intended for dealers and operators of the poker vibrator P14E and contains
useful instructions for use, maintenance and repair. These instructions need to be respected
and followed.
Guarantee provisions
All damage to parts of the poker vibrator, occurring within 12 months after date of purchase as a
consequence of material, production or construction defects, will be replaced by the manufacturer as
soon as possible.
The guarantee is valid for 12 months from the date of purchase except for wear parts like carbon
brushes, cables, plug, rubber sleeve, rocker switch and rubber protection cap.
The manufacturer declines all responsibility for unsafe situations, accidents and damage caused by:
Ignoring safety and using instructions as described on the machine or the instruction manual.
Incompetent or incorrect maintenance (f.i. irregular cleaning of the ventilation slots and cleaning
with a high pressure cleaner or by a water jet under high pressure).
Connecting the poker vibrator to the wrong voltage.
Storing the machine in a damp place.
Assembling or dismantling of the poker vibrator by unqualified personnel (employees who are
unfamiliar with the content of this instruction manual).
Other use than the prescribed use.
Alternations of the machine carried out by other than manufacturer. This also includes
assembling of non-original parts.
Guarantee certificate
P14 nr: _______________________________
Date of purchase: ___________________________________
Fig. 1: example label P14-E
The label can be found under the handle on the motor housing.
A hand held poker vibrator is a machine with a vibrating, steel bottle, for compacting concrete. The
poker vibrator P14E consists of an electrical motor in an impact and shock proof plastic motor housing
and a flexible poker vibrator. The flexible poker vibrator is attached to the part of the spindle which
sticks out of the motor housing. On the motor housing is a switch for turning the electrical motor on and
off.
Operation
The electrical drive-unit is started by pressing the switch to the ‘ON’ position. The toothed motor shaft
drives the gear wheel on the spindle. The spindle ensures that the flexible drive shaft rotates. The drive
shaft’s rotating movement, ensures that the pendulum moves along the inner circumference of the
poker head. This causes the vibrations. The vibrations from the poker head compact the concrete.
Motor protection Impact and shockproof plastic motor housing.
Poker vibrator connection Quick release.
Sound pressure level db(A) 79 (outside, 1 metre distance, ear height).
Weighted effective value of
acceleration Determined according to ISO 5349 part 1: higher than 2,5m/s² (12,1m/s²) *.
These data were measured during operation of the inside vibrating element in
concrete.
Testing vibrating bottle Tested on leakage following the internal production procedure.
Testing electrical motor According to NEN 3140, each electrical motor undergoes electrical safety
tests. A specially developed measuring instrument tests isolation
resistance, leakage current and power consumed.
* Obligated According to ISO 5349, whenever wearing vibrating reducing gloves, a
user can continuously work for 3 hours (comfort value) to a max. of 11.7
hours per day safely.
Table 1: View of the assortment of flexible poker vibrators
The flexible poker vibrator with a pokerhead of 38 and 45 millimetres are available with rubber caps.
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.