Liebherr UWKES1752RH-21, UWKES1752LH-21 Installation Guide
Übersetzung
Installation instructions Page 10
Multi-temperature wine cabinet
EN
7080 196-00
UWT 1672 / UWK 1752
Supplied accessories
Mounting the dust lter
The supplied dust filter prevents that dirt enters
the motor compartment, reducing the refrigeration
performance. Therefore always install the dust filter.
Remove the protective lm from the
dust lter.
Insert the lter at the bottom and click
into place at the top.
Ventilation grille
Dust lter
Foam moulding for ventilation duct in appliance plinth
Cover strips
Appliance venting
The required air ow is directed through
the plinth.
It is important to use the provided ventilation grille for the ventilation opening.
Cut-out section in the plinth panel
10
Retaining screws for installation
Important
The cut-out section in the
plinth panel must be centred
in relation to the appliance.
Spanner to adjust the height of the appliance
Appliance dimensions
View from
above
Maximum door
opening angle
Side view
EN
Installation dimensions
Important
In order to avoid any problems when installing the appliance and
to avoid damage to the appliance, the following conditions must
be complied with.
The oor on which the appliance stands must be
horizontal and level.
The kitchen unit must be aligned horizontally and
vertically.
Height when adjustable feet have been
screwed in as far as they will go.
Maximum height adjustment = 50 mm
Dimensions of appliance door
1 In this area, the power cord comes out of the appliance rear.
Free length of the power cord = 2000 mm
Choose the position of the socket considering these specications.
The socket must not be situated behind the appliance and must be easily accessible.
11
Loading...