Operating instructions
Table-height refrigerator
190913
T/TP/TP(esf)14../15../17../18.. ... 1
7081996 - 01
Appliance at a glance
Contents
1 Appliance at a glance............................................ 2
1.1 Description of appliance and equipment.................. 2
1.2 Range of appliance use............................................ 2
1.3 Conformity................................................................ 3
1.4 Installation dimensions............................................. 3
1.5 Saving energy.......................................................... 3
2 General safety information................................... 3
3 Controls and displays........................................... 4
3.1 Operating controls.................................................... 4
4 Putting into operation............................................ 4
4.1 Transporting the appliance....................................... 4
4.2 Installing the appliance............................................. 4
4.3 Changing over the door hinge.................................. 5
4.4 Undercounter installation.......................................... 6
4.5 Insertion into a row of kitchen units........................... 7
4.6 Disposing of packaging............................................ 7
4.7 Connecting the appliance......................................... 7
4.8 Switching on the appliance....................................... 7
5 Control.................................................................... 7
5.1 Refrigerator compartment........................................ 7
5.2 Freezer compartment............................................... 8
6 Maintenance........................................................... 9
6.1 Defrosting................................................................. 9
6.2 Cleaning the appliance............................................. 9
6.3 Changing the interior light......................................... 10
6.4 Customer service..................................................... 10
7 Malfunction............................................................. 10
8 Decommissioning.................................................. 11
8.1 Switching off the appliance....................................... 11
8.2 Taking the appliance out of service.......................... 11
9 Disposing of the appliance................................... 11
The manufacturer works constantly on the further development
of all the types and models. Therefore please understand that
we have to reserve the right to make design, equipment and
technical modifications.
To get to know all the benefits of your new appliance, please
read the information contained in these instructions carefully.
The instructions apply to several models. Differences may
occur. Text relating only to specific appliances is marked with
an asterisk (*).
Instructions for action are marked with a , the results of
action are marked with a .
1 Appliance at a glance
1.1 Description of appliance and equipment
Note
Place food inside the appliance as shown in the diagram.
u
This allows the appliance to save energy during operation.
Shelves, drawers and baskets are arranged for optimum
u
energy efficiency on delivery.
Fig. 1
(1) Thermostat housing,
interior lighting
(2) Freezer compartment* (8) Vegetable crisper
(3) Butter and cheese tray (9) Adjustable feet at the front
(4) Bottle rack* (10) Condensate drain
(5) Bottle holder* (11) Type plate
(6) Shelf, relocatable
(7) Coldest zone
and castors* at the rear
1.2 Range of appliance use
The appliance is suitable solely for cooling food
in a domestic environment or similar. This
includes use in, for example
-
in staff kitchenettes, bed and breakfast establishments,
-
by guests in country homes, hotels, motels
and other forms of accommodation,
-
in catering and similar services in the wholesale trade
Use the appliance solely as is customary within
a domestic environment. All other types of use
are inadmissible. The appliance is not suitable
for storing and cooling medicines, blood
plasma, laboratory preparations or similar
substances and products covered by the
2007/47/EC Medical Devices Directive. Misuse
of the appliance can result in the stored products suffering harm or perishing. Furthermore,
the appliance is not suitable for operation in
potentially explosive atmospheres.
The appliance is set to operate within specific
ambient temperature limits according to its
climate rating. The correct climate rating for
your appliance is indicated on the type plate.
Note
Compliance with the ambient temperatures
u
indicated is required, otherwise the cooling
performance is reduced.
Climate
rating
SN 10 °C to 32 °C
2 * Depending on model and options
for ambient temperatures of
General safety information
Climate
rating
N 16 °C to 32 °C
ST 16 °C to 38 °C
T 16 °C to 43 °C
for ambient temperatures of
1.3 Conformity
The refrigerant circuit is tested for leakage. The appliance
complies with the relevant safety regulations and EC Directives
2006/95/EC, 2004/108/EC, 2009/125/EC and 2010/30/EU.
Note for test institutions:
Tests are to be carried out according to the applicable
standards and guidelines.
Preparation and testing of the appliances must be carried
out taking the manufacturer's loading plans and the
notes in the operating manual into account.
1.4 Installation dimensions
T1404 501 497 505 — 1072 620 — 610 850
T1400 501 497 505 — 1072 620 — 610 850
x
For appliances supplied with wall spacers, the measurement
increases by 35 mm (see 4.2) .
1.5 Saving energy
Always ensure good ventilation. Do not cover ventilation
-
openings or grille.
Do not place appliance in areas of direct sunlight or next to a
-
stove, heater or similar object.
The energy consumption depends on the installation condi-
-
tions, e.g. the ambient temperature (see 1.2) .
Keep the time the appliance is open to a minimum.
-
The lower the temperature setting, the higher the power
-
consumption.
Store food logically. (see Appliance at a glance).
-
Ensure that all food is well packed and covered for storage.
-
This will prevent frost from forming.
First cool warm food to room temperature before storing it .
-
Defrost frozen food in the refrigerator.*
-
If there is a thick layer of frost in the appliance: defrost the
-
appliance.*
Accumulated dust increases the energy
consumption:
Once a year, dust the refrigerating unit
-
together with the metal grille of the heat
exchanger at the back of the appliance.
Fig. 2
a b c c' d e e' g h
T1710 554 550 561 590 1125 623 652 610 850
T1810 601 597 612 640 1175 628 654 610 850
TP1710 601 597 612 640
TPesf1710 601 597 595 642
T1714 601 597 612 640 1175 628 654 610 850
TP1714 601 597 612 640
TPesf1714 601 597 595 642
TP1410 554 550 561 590
TP1414 554 550 561 590
TP1434 554 550 561 590
T1514 554 550 561 590 1125 623 652 610 850
T1700 554 550 561 — 1125 623 — 610 850
T1504 554 550 561 — 1125 623 — 610 850
T1414 501 497 505 534 1072 620 649 610 850
T1410 501 497 505 534 1072 620 649 610 850
1175x628x654x610
1175x608x655x610
1175x628x654x610
1175x608x655x610
1125x623x652x610
1125x623x652x610
1125x623x652x610
x
850
x
850
x
850
x
850
x
850
x
850
x
850
2 General safety information
Danger for the user:
-
This appliance can be used by children of 8
years old and over, and also by persons with
restricted physical, sensory or mental
capacity or lack of experience and knowl-
edge, if they are supervised or have been
instructed on safe use of the appliance and
understand the resulting risks. Children must
not be allowed to play with the appliance.
Cleaning and user maintenance must not be
carried out by children without supervision.
-
When disconnecting the appliance from the
supply, always take hold of the plug. Do not
pull the cable.
-
In the event of a fault pull out the mains plug
or deactivate the fuse.
-
Do not damage the mains power cable. Do
not operate the appliance with a defective
mains power cable.
-
Have any repairs to or intervention in the
appliance, and any change of the mains
power cable, carried out by the customer
service only or by other specialised personnel
trained for the purpose.
-
Only assemble, connect and dispose of the
appliance according to the instructions.
-
Please keep these instructions in a safe place
and pass them on to any subsequent owners.
* Depending on model and options 3
Controls and displays
-
Special-purpose lamps (incandescent lamps,
LEDs, fluorescent tubes) in the appliance
serve to illuminate the appliance interior and
are not suited for room illumination.
Fire hazard:
-
The refrigerant R 600a is environmentally
friendly but flammable. Escaping refrigerant
may ignite.
•
Do not damage the refrigerant circuit pipes.
•
Do not allow naked flames or ignition
sources to enter the appliance.
•
Do not use any electrical appliances in the
interior (e.g. steam cleaners, heaters, ice
cream maker etc.).
•
If refrigerant escapes: remove any naked
flames or sources of ignition from the
leakage area. Ventilate the room well.
Notify the after-sales service.
-
Do not store explosives or sprays using
combustible propellants such as butane,
propane, pentane, etc. in the appliance. To
identify these spray cans, look for the list of
contents printed on the can, or a flame
symbol. Gases possibly escaping may ignite
due to electrical components.
-
Keep burning candles, lamps and other items
with naked flames away from the appliance
so that they do not set the appliance on fire.
-
Please be sure to store alcoholic drinks or
other packaging containing alcohol in tightly
closed containers. Any alcohol that leaks out
may be ignited by electrical components.
Danger of tipping and falling:
-
Do not misuse the plinth, drawers, doors etc.
as a step or for support. This applies particularly to children.
Danger of food poisoning:
-
Do not consume food which has been stored
too long.
Danger of frostbite, numbness and pain:
-
Avoid lasting skin contact with cold surfaces
or refrigerated/frozen food or take protective
steps, e.g. wear gloves. Do not consume ice
cream, water ice or ice cubes immediately
and do not consume them too cold.
Danger of injury and damage:
-
Hot steam can lead to injury. Do not use electrical heating or steam cleaning equipment,
open flames or defrosting sprays to defrost.
-
Do not use sharp implements to remove the
ice.
Please observe the specific information in
the other sections:
DANGER identifies a situation involving direct
danger which, if not obviated, may
result in death or severe bodily
injury.
WARNING identifies a dangerous situation
which, if not obviated, may result in
death or severe bodily injury.
CAUTION identifies a dangerous situation
which, if not obviated, may result in
minor or medium bodily injury.
NOTICE identifies a dangerous situation
which, if not obviated, may result in
damage to property.
Note identifies useful information and tips.
3 Controls and displays
3.1 Operating controls
Fig. 3
(1) Temperature controller (2) Cool-Plus switch
4 Putting into operation
4.1 Transporting the appliance
CAUTION
Risk of injury and danger of damage as a result of incorrect
transport!
Transport the appliance in a packed condition.
u
Transport the appliance upright.
u
Do not transport the appliance without assistance.
u
4.2 Installing the appliance
WARNING
Fire hazard due to dampness!
If live parts or the mains lead become damp this may cause
short circuits.
The appliance is designed for use in enclosed areas. Do not
u
operate the appliance outdoors or in areas where it is
exposed to splash water or damp conditions.
4 * Depending on model and options
Risk of fire due to short circuit!
If the mains cable/connector of the appliance or of another
appliance touch the rear of the appliance, the mains cable/
connector may be damaged by the appliance vibrations,
leading to a short circuit.
u
u
Fire hazard due to refrigerant!
The refrigerant R 600a is environmentally friendly but flammable. Escaping refrigerant may ignite.
u
WARNING
Stand the appliance so that it is not touched by connectors
or main cables.
Do not plug the appliance or any others into sockets located
near the rear of the appliance.
WARNING
Do not damage the piping of the refrigeration circuit.
Putting into operation
In the case of an appliance with
u
enclosed wall spacers, mount the
wall spacers on the back of the
appliance at the top left and right.
Dispose of packaging material (see 4.6) .
u
Align the appliance so that it
u
stands firmly and on a level by
applying the accompanying
spanner to the adjustable-
height feet (A) and using a
spirit level.
Fire hazard and danger of damage!
u
Blocked ventilation openings pose a risk of fire and damage!
u
q
q
q
q
q
q
q
u
u
u
u
The spacers supplied with some appliances must be used to
achieve the stated energy consumption. These will extend the
depth of the appliance by approx. 35 mm. The appliance is fully
functional if the spacers are not used, but does have a slightly
higher energy consumption.
WARNING
Do not place appliances emitting heat e.g. microwaves,
toasters etc. on the appliance!
WARNING
Always keep the ventilation openings clear. Always ensure
that the appliance is properly ventilated!
In the event that the appliance is damaged, contact the
supplier immediately before connecting to the mains.
The floor at the site must be flat and level.
Do not install the appliance in a location where it is exposed
to direct radiation of the sun, next to a cooker, heater and
similar.
Always stand the appliance backed directly to the wall using
the enclosed wall spacers (see below).
The appliance may be moved only when it is empty.
Do not install the appliance without assistance.
Standard EN 378 specifies that the room in which you install
your appliance must have a volume of 1 m2 per 8 g of R
600a refrigerant used in the appliance. If the room in which
the appliance is installed is too small, a flammable gas-air
mixture may form in the event of a leakage in the refrigeration circuit. The quantity of refrigerant used in your appliance
is indicated on the type plate on the inside of the appliance.
Detach the connecting cable from the rear of the appliance,
removing the cable holder at the same time because otherwise there will be vibratory noise!
Remove the protective film from the outside of the appliance.*
Remove the protective film from the decorative trims.
Remove all transit supports.
Note
Clean the appliance (see 6.2) .
u
If the appliance is installed in a very damp environment,
condensate may form on the outside of the appliance.
Always see to good ventilation at the installation site.
u
4.3 Changing over the door hinge*
You can change over the door hinges if necessary.
Make sure that the following tools are at hand:
Torx® 25
q
Torx® 15
q
Supplied open-ended wrench
q
If necessary, a second person to assist with installation
q
CAUTION
Risk of injury if the door tips!
Take good hold of the door.
u
Set down the door carefully.
u
Fig. 4
Remove the spacer
u
of the door.
Fig. 4 (13)
from under the left-hand side
* Depending on model and options 5
Putting into operation
Insert the spacer
u
of the door, as it is important for the stability of the appliance.
Fig. 8 (13)
back under the right-hand side
Fig. 8
Fig. 5 On appliances with a door handle
Risk of injury due to the door dropping out!
If the bearing parts are not screwed into place firmly enough,
the door may drop out. This may lead to severe injuries. What
is more, the door may not close and therefore the appliance
may fail to cool properly.
u
u
WARNING
Screw on the bearing brackets/bearing pins tightly (4 Nm).
Check all of the screws and retighten if necessary.
4.4 Undercounter installation
Fire hazard from short-circuiting!
u
u
Counter height appliances up to 850 mm in height can be
installed below the worktop. In the case of continuous worktops, the cover on the refrigerator can be removed and the
appliance slid in under the worktop.
With such installations, the plug
behind the appliance and must be easily accessible.
For the purpose of ventilation and aeration at the rear of the
appliance, a min.140 cm2 ventilation cavity is required. With an
installation depth of 600 mm, the wall connection profile on the
worktop must not exceed a max. 10 mmin depth.
WARNING
When pushing the appliance into the recess, take care not
to crush, jam or damage the mains power cable.
Do not operate the appliance with a defective mains power
cable.
Fig. 9 (1)
must not be located
Fig. 6 On appliances without a door handle
Fig. 7 On appliances with a freezer compartment
Follow the sequence of the item numbers in the diagram.
u
Fig. 9
In order to take off the appliance cover:
Remove the screws
u
Raise the cover up at the back, slide forward and lift up and
u
off the appliance.
Fig. 9 (2)
from the rear side.
6 * Depending on model and options
Control
4.5 Insertion into a row of kitchen units
Fig. 10
(1) Stack cabinet (3) Kitchen cabinet
(2) Appliance (4) Wall
x
For appliances supplied with wall spacers, the measurement
increases by 35 mm (see 4.2) .
The appliance can be inserted into a row of kitchen units. To
match the appliance
a suitable stack cabinet
appliance.
When installing with kitchen units (max. depth 580 mm), the
appliance can be positioned directly next to the kitchen cabinet
Fig. 10 (3)
and 50 mmx in the centre of the appliance in relation to the
kitchen cabinet front.
Important for the ventilation:
At the back of the stack cabinet there has to be a ventilation
-
duct of at least 50 mm depth throughout the width of the
stack cabinet.
The ventilation space under the ceiling has to be at least
-
300 cm2.
the larger the ventilation space, the more energy-saving the
-
appliance is in operation.
If the appliance is installed with the hinges next to a wall
Fig. 10 (4)
at least 40 mm. This corresponds to the projection of the
handle when the door is open.
. The appliance will project by 34 mmx at the sides
, the distance between appliance and wall has to be
Fig. 10 (2)
Fig. 10 (1)
to the height of the row of units,
can be fitted above the
4.6 Disposing of packaging
WARNING
Danger of suffocation due to packing material and plastic film!
Do not allow children to play with packing material.
u
The packaging is made of recyclable materials:
corrugated board/cardboard
-
expanded polystyrene parts
-
polythene bags and sheets
-
polypropylene straps
-
nailed wooden frame with polyethylene panel*
-
Take the packaging material to an official collecting point.
u
4.7 Connecting the appliance
NOTICE
Risk of damage to the electronic control system!
Do not use stand-alone inverters (conversion of d.c. to a.c./
u
three-phase) or energy saving plugs.
Fire and overheating hazard!
u
The type of current (alternating current) and voltage at the
installation site have to conform with the data on the type plate
(see Appliance at a glance).
The socket must be properly earthed and fused. The tripping
current for the fuse must be between 10 A and 16 A.
The socket must be easily accessible so that the appliance can
be quickly disconnected from the supply in an emergency. It
must be outside the area of the rear of the appliance.
u
u
WARNING
Do not use extension cables or multiple socket outlets.
Check the electrical connection.
Plug in the power plug.
4.8 Switching on the appliance
Put the appliance into operation about 2 hours before first
loading food to be frozen.
Turn the temperature control
u
0 setting to point 3.
The interior light is on.
w
Fig. 3 (1)
to the right, from the
5 Control
5.1 Refrigerator compartment
The natural circulation of air in the refrigerator compartment
results in zones differing in temperature. It is coldest directly
above the vegetable drawers and at the rear wall. It is warmest
at the top front of the compartment and in the door.
5.1.1 Food refrigeration
Store perishable food such as ready-to-serve dishes, meat
u
products and sausages in the coldest zone. Place butter
and preserves in the upper area and in the door (see Appli-
ance at a glance).
Use recyclable plastic, metal, aluminium and glass
u
containers and cling film for wrapping.
Always store liquids and food which is subject to odour or
u
taste transfer in closed containers or cover them.
Foods which give off a large amount of ethylene gas and
u
delicate foods, such as fruit, vegetables, salad, should
always be stored separately or wrapped so as not to reduce
the storage life; e.g. do not store tomatoes together with
kiwis or cabbage.
Do not store food too close together to enable good air
u
circulation.
To safeguard bottles from tipping over: move the bottle
u
holder.
5.1.2 Setting the temperature
The temperature can be set between 1 (warmest temperature,
minimum cooling performance) and 7 (coldest temperature,
maximum cooling performance).
The middle control setting is recommended, then a middle
temperature of approx.5 °C is established in the refrigerator
compartment.
* Depending on model and options 7
Control
To ensure ideal temperatures for storing frozen foods, a setting
of “4” to “7” on the temperature controller is recommended.
Selecting “7” makes it possible to achieve temperatures under
0 °C in the coldest part of the fridge compartment.
An average temperature of approx. –18 °C is then established
in the freezer compartment
Turn the temperature control
u
The temperature depends on the following factors:
- the door opening frequency
- the room temperature at the site where the appliance is
installed
- the type, temperature and quantity of frozen food
Adjust the temperature as needed, using the control.
u
5.1.3 CoolPlus function*
At low room temperatures of 18 °C or lower:
Press the Cool-Plus switch
u
The deep temperatures in the freezer compartment are
w
ensured.
The appliance's interior lighting is lit on a dim setting
w
even when the door is closed.
Once the room temperature is again higher than18 °C :
Deactivate the Cool-Plus
u
Fig. 3 (1)
Fig. 3 (2)
Fig. 3 (2)
.
.
switch manually.
Fig. 11
*
The glass shelf with stop face (2) has to be at the back.*
u
The glass plate (1) with pull-out stops must be at the front so
u
that the stops (3) face downwards.*
5.1.6 Door racks
Removing the storage rack
Note
At normal room temperatures, in excess of 18 °C, the Cool-
u
Plus switch should be turned off, as it is not required.
5.1.4 Shelves
Relocating the shelves
The shelves have stops preventing them from being unintentionally pulled out.
Lift the shelf and draw it out
u
forwards.
Insert shelf with the raised
u
edge pointing upwards at
the back.
The food does not freeze
w
onto the rear wall.
Dismantling shelves
The shelves can be disman-
u
tled for cleaning.
Remove storage rack according to
u
illustration.
Dismantling door racks*
The door racks can be dismantled for cleaning.
u
5.1.7 Removing the bottle holder
*
*
5.1.5 Using the sectioned shelf
Remove the bottle holder according
CAUTION
Danger of laceration!
The shelf may break. The broken fragments may cause laceration.
Remove only empty shelves.
u
u
to the illustration.
5.2 Freezer compartment*
You can store frozen food for several months, make ice cubes
and freeze fresh food in the freezer compartment at a temperature of -18 °C and lower.
8 * Depending on model and options
*
*
Maintenance
The air temperature in the compartment, measured by thermometer or other instruments, may fluctuate.
5.2.1 Freezing food*
2 kg fresh food/24 h is the maximum weight which can be
frozen.
Risk of injury due to broken glass!
Bottles and cans containing drinks may burst when being
frozen. This applies particularly to sparkling drinks.
u
u
In order that the food is rapidly frozen through to the core, do
not exceed the following quantities per pack:
- Fruit, vegetables up to 1 kg
- Meat up to 2.5 kg
u
u
u
CAUTION
Do not freeze bottles and cans containing drinks!
To switch on Cool-Plus: press Cool-Plus button.
Pack the food in portions in freezer bags, reusable plastic,
metal or aluminium containers.
Spread the food over the shelf. Do not allow it to contact and
thaw items that are already frozen.
If the room temperature is higher than 18 °C:
switch off Cool-Plus: press Cool-Plus button
Fig. 3 (2)
Fig. 3 (2)
.
5.2.2 Storage times*
Guide times for storing various types of food in the
freezer compartment:
Ice cream 2 to 6 months
Sausage, ham 2 to 6 months
Bread, bakery products 2 to 6 months
Game, pork 6 to 10 months
Fish, fatty 2 to 6 months
Fish, lean 6 to 12 months
Cheese 2 to 6 months
Poultry, beef 6 to 12 months
Vegetables, fruit 6 to 12 months
Storage times given are guide times.
5.2.3 Thawing food*
- in the refrigerator compartment
- at room temperature
- in a microwave oven
- in a conventional or fan oven
Food once thawed should be re-frozen only in exceptional
u
cases.
6.1.2 Defrosting freezer compartment*
A layer of frost and ice forms in the freezer compartment after
the appliance has been in use for a lengthy period of time. This
is quite normal. The layer of frost and ice forms more quickly if
the door is opened frequently or if the food is warm when
placed inside. However, a thick layer of ice will increase the
appliance‘s energy consumption. You should therefore defrost
the appliance regularly.
Risk of injury and damage as a result of hot steam!
u
u
u
u
u
u
u
u
u
CAUTION
Do not use electric heaters or steam cleaners, naked flames
or defrosting sprays for defrosting.
Do not remove ice using sharp instruments.
Switch off the appliance.
Pull out the plug.
Wrap the frozen food in newspaper or blankets and store in
a cool place.
Leave the compartment and appliance door open during
defrosting.
Remove detached pieces of ice.
If necessary, pick up defrost water several times, using a
sponge or cloth.
Clean the compartment (see 6.2) .
6.2 Cleaning the appliance
WARNING
Risk of injury and damage as a result of hot steam!
Hot steam can lead to burns and can damage the surfaces.
Do not use any steam cleaners!
u
NOTICE
Incorrect cleaning damages the appliance!
Do not use cleaning agents in concentrated form.
u
Do not use any scouring or abrasive sponges or steel wool.
u
Please do not use any aggressive, scouring, sand-,
u
chloride-, chemical- or acid-based cleaning agents.
Do not use chemical solvents.
u
Do not damage or remove the type plate on the inside of the
u
appliance. It is important for the customer service.
Do not pull off, bend or damage cables or other compo-
u
nents.
Do not allow any cleaning water to enter the drain channel,
u
ventilation grille or electrical parts.
Please use soft cleaning cloths and a universal pH-neutral
u
cleaning agent.
Please use cleaning and care products suitable for contact
u
with foodstuffs in the appliance interior.
Empty appliance.
u
Pull out the power plug.
u
6 Maintenance
Clean the vent grille regularly.
u
Dust deposits increase energy consumption.
6.1 Defrosting
6.1.1 Defrosting refrigerator compartment
The refrigerator compartment is defrosted automatically. The
water evaporates. Drops of water on the rear wall are functionally conditioned and perfectly normal.
Clean the drain hole at regular intervals to allow the defrost
u
water to drain (see 6.2) .
* Depending on model and options 9
w
Clean plastic outer and inner surfaces with lukewarm
u
water and a little washing-up liquid.
Only use a soft clean cloth to wipe side walls with a paint
u
finish. In the case of heavy soiling, use lukewarm water with
neutral cleaning agent.
Do not apply stainless steel cleaning agent to glass or plastic
surfaces to prevent them from being scratched. Darker areas at
the beginning and quite an intensive colour of the stainless
steel surface are normal.*
Malfunction
When soiled, clean stainless steel outer surfaces with a
u
commercially available stainless steel cleaning agent. Then
apply the enclosed stainless steel care product evenly in the
direction of polishing.*
Clean drain hole: Remove
u
deposits with a narrow instrument,
e.g. a cotton bud.
Clean items of equipment by hand with lukewarm water
u
and a little washing-up liquid.
After cleaning:
Wipe dry the appliance and items of equipment.
u
Connect the appliance and switch it on again.
u
Put the food back inside.
u
6.3 Changing the interior light
max. 15 W
Socket: E14
Type of current and voltage must conform with the details on
the type plate
Switch off the appliance.
u
Pull out the power plug or switch off
u
the fuse.
Take hold of the lamp cover.
u
As shown in the diagram, press open
u
the lamp cover on the inside at the
front, and pull it off to the side.
Change the bulb.
u
Put on the lamp cover again and
u
snap it into place.
6.4 Customer service
First check whether you can correct the fault yourself by reference to the list (see Malfunction). If this is not the case, please
contact the customer service whose address is given in the
enclosed customer service list.
WARNING
Risk of injury if repair work is not carried out professionally!
Have any repairs and action - not expressly specified - on
u
the appliance and mains cable carried out by service
personnel only. (see Maintenance)
Read the appliance
u
designation
Fig. 12 (1)
No.
Fig. 12 (2)
serial No.
off the type plate
located inside the
appliance on the lefthand side.
, service
and
Fig. 12 (3)
Fig. 12
Notify the customer service, specifying the fault, appliance
u
designation
Fig. 12 (3)
This will help us to provide you with a faster and more accu-
w
rate service.
Keep the appliance closed until the customer service
u
arrives.
The food will stay cool longer.
w
Pull out the mains plug (not by pulling the connecting cable)
u
or switch off the fuse.
*
Fig. 12 (1)
.
, service No.
Fig. 12 (2)
and serial No.
7 Malfunction
Your appliance is designed and manufactured for a long life
span and reliable operation. If a malfunction nonetheless
occurs during operation, check whether it is due to a handling
*
error. In this case you will have to be charged for the costs
incurred, even during the warranty period. You may be able to
rectify the following faults yourself:
Appliance does not work.
The appliance is not switched on.
→
Switch on the appliance.
u
The power plug is not properly inserted in the wall socket.
→
Check power plug.
u
The fuse of the wall socket is not in order.
→
Check fuse.
u
The compressor runs for a long time.
The compressor switches to a low speed when little cold is
→
needed. Although the running time is increased as a result,
energy is saved.
This is normal in energy-saving models.
u
A LED on the bottom rear of the appliance (at the
compressor) flashes regularly every 15 seconds*.
The inverter is equipped with a diagnostic LED.
→
The flashing is normal.
u
Excessive noise.
Due to the various speed steps, speed-regulated*
→
compressors can generate different running noises.
The sound is normal.
u
A bubbling and gurgling noise.
This noise comes from the refrigerant flowing in the refriger-
→
ation circuit.
The sound is normal.
u
A quiet clicking noise.
The noise is produced whenever the refrigeration unit
→
(motor) automatically switches on or off.
The sound is normal.
u
A hum. It is briefly a little louder when the refrigeration
unit (the motor) switches on.
The refrigeration increases automatically when fresh food
→
has just been placed in the appliance or the door has been
left open for a while.
The sound is normal.
u
The ambient temperature is too high.
→
Solution: (see 1.2)
u
Vibratory noise.
The appliance is not fixed to the ground. The running of the
→
cooling unit therefore makes objects and adjacent furniture
vibrate.
Adjust appliance via the height-adjustable feet.
u
Move bottles and containers apart.
u
The outer surfaces of the appliance are warm*.
The heat of the refrigeration circuit is used to prevent
→
condensate from forming.
This is normal.
u
10 * Depending on model and options
The temperature is not cold enough.
The door of the appliance is not properly closed.
→
Close the door of the appliance.
u
Insufficient ventilation.
→
Clear ventilation grilles.
u
The ambient temperature is too high.
→
Solution: (see 1.2) .
u
The appliance was opened too frequently or for too long.
→
Wait to see whether the appliance reaches the required
u
temperature by itself. If not, please contact the after sales
service (see Maintenance).
The appliance is too close to a source of heat (stove, heater
→
etc).
Change the position of the appliance or the source of heat.
u
The interior light is not on.
The appliance is not switched on.
→
Switch on the appliance.
u
The bulb is faulty.
→
Change the bulb (see Maintenance).
u
If the bulb is defective, the CoolPlus function cannot be acti-
u
vated. In order to ensure that this function will work, the
defective bulb should be changed at the earliest opportunity.
Interior light on half power when CoolPlus is switched
on.*
This is necessary for operational reasons.
→
This is normal.
u
Decommissioning
8 Decommissioning
8.1 Switching off the appliance
Turn temperature control
u
Fig. 3 (1)
to 0.
8.2 Taking the appliance out of service
Empty the appliance.
u
Pull out the power plug.
u
Clean the appliance (see 6.2) .
u
Leave the door open to prevent odour.
u
9 Disposing of the appliance
The appliance contains some reusable materials
and should be disposed of properly - not simply
with unsorted household refuse. Appliances which
are no longer needed must be disposed of in a
professional and appropriate way, in accordance
with the current local regulations and laws.
When disposing of the appliance, ensure that the refrigeration
circuit is not damaged to prevent uncontrolled escape of the
refrigerant it contains (data on type plate) and oil.
Disable the appliance.
u
Pull out the plug.
u
Cut through the connecting cable.
u
* Depending on model and options 11
Disposing of the appliance
12 * Depending on model and options
Loading...