Liebherr TCC User Manual

51015

20

25

01020

0

Outreach (m)

9

12

Travelling Cargo Crane

Load diagram

TCC 350

45

40

35

30

20

10

Capacity on the ropes (t)

Four rope grab operation

0

0

5 10 15

9 12

20 25 30

Outreach (m)

32

35 40

36

29.2 m

Pivot point 16.2 m

9 m

10.5 m

2 m

CENTER LINE CAPESIZE

Eye level 21.5 m

BULK CARRIER

PANAMAX
75,000 dwt

1.5 m

32.2 m

Travelling Cargo Crane TCC 350

utmost performance
high reliability and quality

excellent cost/value ratio

low operational costs

15 m

9 m

4 m

10.5 m

variation of rail span on request

Working radius

Min. to max. radius (with 8 m extended cabin) 12 m – 36 m
Min. to max. radius (with 5 m extended cabin) 9 m – 36 m
Min. to max. radius (with larger winch) 12 m – 32 m
Service radius minimum
with key-switch override 6 m
Hook travel below crane rail approx. 20 m

Main dimensions crane

Min. to max. outreach 6—36 m
Height of boom pivot point 16.2 m
Tower cabin height (eye level) 21.5 m
Rail span 10.5 m
Max. wheel load on request
Bogies/corner (based on max. wheel load of 25 t) 8
Bulk turnover (depending on conditions) 1200 t/h

Design conditions

Ambient working temperature -25° C to 45° C
Optional ambient working temperature -40° C to 45° C
Max. humidity 93%
Max. wind speed 20 m/s (working co nditio n)
63 m/s (parking condition)

Weights

Weight of the crane incl. gantry and ballast approx. 590 t

4 m4 m

based on max. wheel load of 25 t

35.1 m

18 m

2 m

Capacity

Radius SWL

Grab operation from 9 m – 36 m 35 t
Hook operation from 9 m – 36 m 45 t

Capacity with larger winch and max. 32 m jib (optional)

Radius SWL

Grab operation from 12 m – 32 m 45 t
Hook operation from 13 m – 32 m 60 t
from 14 m – 26 m 80 t

Working speeds

Grab operation - hoisting / lowering with 35 t 0—50 m/min
Hook operation - hoisting / lowering with 45 t 0—38 m/min
Hook operation - hoisting / lowering with empty hook 0—77 m/min
Slewing 0—1.3 rpm
Slewing range 360° unlimited
Luffi ng approx. 60 s
Travelling 0—20 m/min

Electric motor

Type of motor three phase squirrel cage
Nominal output 2x 295 kW (S6—40%ED)
Nominal current 525 A
Starting current 1152 A
Main power supply 400 V, 50 Hz, 3ph
Auxiliar y power supply 220 V, 50 Hz, 3ph

TCC 350 – 10512282 – 04/2010 Subject to change without notice.

Liebherr-Werk Nenzing GmbH

P.O. Box 10, A-6710 Nenzing/Austria
Tel.: [phone]
Fax: [phone]
[e-mail]
www.liebherr.com