How it Works
Liebherr
Loading...
SRFvh 5501
User guide
48 pgs7.85 Mb0
User guide [de]
50 pgs6.38 Mb0

Liebherr SRFvh 4001, SRFvh 4011, SRFvh 5501, SRFvh 5511 User guide

Download
Page 1
User Guide
Quality, Design and Innovation
home.liebherr.com/fridge-manuals
Page 2
Contents
1 Appliance at a glance............................................ 3
1.1 Scope of supply............................................................ 3
1.2 Overview of appliance and equipment..................... 3
1.3 Special features........................................................... 3
1.4 Range of use of appliance.......................................... 3
1.5 Appliance noise emissions......................................... 4
1.6 Compliance................................................................... 4
2 General safety instructions.................................. 4
3 Putting into operation........................................... 6
3.1 Installation conditions................................................ 6
3.2 Appliance dimensions................................................. 7
3.3 Transporting appliance............................................... 7
3.4 Unpacking appliance................................................... 7
3.5 Removing transport lock............................................. 7
3.6 Installing door handle................................................. 7
3.7 Mounting anti-tipping device..................................... 7
3.8 Installing appliance..................................................... 8
3.9 Setting up the appliance so it is level...................... 9
3.10 Installing multiple appliances.................................... 9
3.11 After installation.......................................................... 9
3.12 Disposing of packaging............................................... 9
3.13 Reversing the door....................................................... 9
3.14 Aligning the door.......................................................... 16
3.15 Connecting appliance................................................. 17
3.16 Switching on appliance (first use)............................ 17
4 Storage.................................................................. 18
4.1 Information regarding storage................................... 18
4.2 Storage times............................................................... 18
5 Controls................................................................. 18
5.1 Control and display elements.................................... 18
5.2 Navigation..................................................................... 19
5.3 Functions....................................................................... 20
5.3.6 Settings menu access protection .........................23
5.3.8 Maintenance interval reminder ............................. 25
5.3.30 Factory reset ............................................................ 34
5.4 Message........................................................................ 35
6 Features................................................................. 37
6.1 Safety lock.................................................................... 37
6.2 Sensors.......................................................................... 38
6.3 Sensor info ................................................................... 38
6.4 Interfaces...................................................................... 38
7 Maintenance.......................................................... 39
7.1 Maintenance schedule................................................ 39
7.2 Defrosting appliance................................................... 40
7.3 Cleaning the appliance............................................... 40
7.4 Replacing appliance battery...................................... 41
8 Customer help....................................................... 42
8.1 Technical specifications............................................. 42
8.2 Technical fault.............................................................. 42
8.3 Customer Service......................................................... 43
8.4 Type plate...................................................................... 43
9 Shutting down....................................................... 43
10 Disposal................................................................. 44
10.1 Preparing appliance for disposal.............................. 44
10.2 Disposing of the appliance in an environmentally
friendly manner............................................................ 44
11 Additional information.......................................... 44
12 Quick Start Guide for everyday use...................... 45
The manufacturer is continually working on the further development of all types and models. Please be aware that we reserve the right to make changes to the shape, equip‐ ment and technology.
Symbol
Explanation
Read instructions
Please read the information in these instruc‐ tions carefully to understand all of the benefits of your new appliance.
Full instructions on the internet
You can find detailed instructions on the internet using the QR code on the front of these instruction or by entering the service number at home.liebherr.com/fridge-
manuals.
The service number can be found on the serial tag:
Fig. Example illustration
Check appliance
Check all parts for transport damage. If you have any complaints, please contact your agent or customer service.
Differences
These instructions apply to a range of models, so differences are possible. Sections that apply to certain models only are marked with an asterisk (*).
2 * Depending on model and options
Page 3
Symbol Explanation
Instructions and results
Instructions are marked with a . Results are marked with a .
Videos
Videos about the appliances are available on the YouTube channels of Liebherr-Hausgeräte.
These operating instructions apply to:
SRFvh 4001
-
SRFvh 4011
-
SRFvh 5501
-
SRFvh 5511
-
1 Appliance at a glance
1.1 Scope of supply
Check all parts for transport damage. If you have any complaints, please contact your dealer or Customer Service. (see 8.3 Customer Service)
The delivery comprises the following parts:
Free-standing appliance
-
Equipment *
-
Installation materials *
-
Operating instructions
-
Service brochure
-
Quality certificate *
-
Mains cable
-
Handle incl. screws and Torx wrench
-
Wall fastening kit
-
Appliance at a glance
Fig. 1 Example illustration
Equipment
(1)
Type plate (6) Control elements and
temperature display
(2) Grid shelves (7) Sensor feedthrough (3) Adjusting feet/castors*(8) Safety thermostat
sensor
(4) Interior lighting * (9) Defrost drain water (5) Lock (10) P sensor
1.2 Overview of appliance and equip‐ ment
SRFvh 4001 SRFvh 5501
SRFvh 4011
SRFvh 5511
Fig. 2 Example illustration of the rear
Equipment
LAN/WiFi interface* (4) Connection for P sensor
(1) (2) Potential-free alarm
output
(3) USB interface
(5) Carrying aid
1.3 Special features
Note
Accessories are available via Customer Service (see 8.3 Customer Service) and in the Liebherr-Hausgeräte­Shop at https://home.liebherr.com.
1.4 Range of use of appliance
Intended use
* Depending on model and options 3
Page 4
General safety instructions
This laboratory refrigerator is suitable for professional storage of products at tempera‐ tures between 3 °C and 16 °C.
Typical products to be stored include research samples, reagents, laboratory inven‐ tory etc.
The appliance meets the requirements of DIN 13277 Refrigerators and freezers for labora‐ tory and medical applications.
It is necessary to use an independent alarm system with permanent monitoring if storing valuable or temperature-sensitive substances or products. This alarm system must be designed in such a way that every alarm state is immediately registered by a compe‐ tent person who then takes appropriate measures.
Foreseeable incorrect use
Do not use the appliance for the following applications:
-
Storage and refrigeration of:
•
Chemically unstable, flammable or corro‐ sive substances
•
Blood, plasma or other body fluids for the purpose of infusion, application or intro‐ duction in the human body.
-
Use in potentially explosive atmospheres.
-
Use outdoors or in areas exposed to damp‐ ness and splashing water.
Improper use of the appliances will result in goods stored being damaged or spoiled.
Climate classes
The applicable climate class for your appli‐ ance is printed on the type plate.
Note
The minimum permitted room temperature at the place of installation is 10 °C.
Slight condensation may form at the limit conditions on the glass door and on the side walls.
1.5 Appliance noise emissions
The A-weighted emission sound pressure level during oper‐ ation of the appliance is under 70 dB(A) (sound power rel. 1 pW).
1.6 Compliance
The refrigerant circuit has been tested for leaks. This appliance complies with the applicable safety regula‐
tions and with EU directives 2014/35/EU, 2014/30/EU and 2011/65/EU.
The installed wireless module complies with direc‐ tive 2014/53/EU. Information on the wireless model (see 8.1 Technical specifications) .
The full text of the EU Declaration of Conformity is available on the following website: www.liebherr.com
2 General safety instructions
Please keep these operating instructions in a safe place so you can refer back to them at any time.
If you pass the appliance on, please hand these operating instructions to the next user.
Read these operating instructions carefully before use to ensure safe and correct use of the appliance. Follow the instructions, safety instructions and warning messages included at all times. They are important for ensuring you can operate and install the appliance safely and without any problems.
Danger for the user:
-
This appliance may only be used by specialist and laboratory personnel who have been trained for this purpose and are
Fig. 3 Type plate
The climate class
(X)
states the ambient conditions in which the appliance can be oper‐ ated safely.
Climate class (X)
max. room temperature in °C
7 35 75
max. rel. humidity in %
familiar with all safety measures pertaining to laboratory work. Children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge must not commission or operate this appliance.
-
The socket must be easily accessible so that the appliance can be disconnected quickly from the electricity supply in an emergency. It must not be located in the area behind the appliance.
-
When disconnecting the appliance from the supply, always take hold of the plug. Do not pull the cable.
4 * Depending on model and options
Page 5
General safety instructions
-
In the event of a fault pull out the mains plug or deactivate the fuse.
-
WARNING: Do not damage the mains power cable. Do not operate the appliance with a defective mains power cable.
-
WARNING: Multiple sockets/distributors and other electronic equipment (such as halogen transformers) must not be placed or operated at the rear of the appliance.
-
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
-
Only customer service or other specially trained staff may repair or perform other operations on the appliance.
-
Only assemble, connect and dispose of the appliance according to the instructions.
Fire hazard
-
The coolant used (information on the model plate) is ecofriendly but also flammable Any leaking coolant may ignite.
•
WARNING: Do not damage refrigeration circuit.
•
Do not handle ignition sources inside the appliance.
•
WARNING: Do not use electrical appli‐ ances in the fridge compartment which do not comply with the design recom‐ mended by the manufacturer.
•
If the refrigerant leaks: remove any naked flames or ignition sources from the vicinity of the leakage point. Properly air the room. Inform customer services.
-
Do not operate the appliance close to explosive gases.
-
Do not store or use petrol or other flam‐ mable gases and liquids close to the appli‐ ance.
-
Do not store any explosive substances, such as aerosol containers with flammable propellant gas, in the appliance. To iden‐ tify these spray cans, look for the list of contents printed on the can, or a flame symbol. Gases possibly escaping may ignite due to electrical components.
-
Keep burning candles, lamps and other items with naked flames away from the appliance so that they do not set the appli‐ ance on fire.
-
Alcoholic liquids or other containers with alcohol inside must only be stored tightly sealed. Any alcohol that leaks out may be ignited by electrical components.
Danger of tipping and falling:
-
WARNING: In order to prevent danger due to an unstable appliance, it must be fixed in accordance with the instructions.
-
Do not misuse the plinth, drawers, doors etc. as a step or for support.
Danger of frostbite, numbness and pain:
-
Avoid prolonged skin contact with cold surfaces or refrigerated/frozen goods or take protective measures, e.g. wear gloves.
Danger of injury and damage:
-
WARNING: Do not use mechanical equip‐ ment or other methods to speed up the defrosting process other than those recom‐ mended by the manufacturer.
-
WARNING: Risk of injury due to electric shock! There are live electrical parts under the cover. Only have the LED interior lighting replaced or repaired by customer service or other suitably trained professionals.
-
NOTICE: Appliance must only be used using original manufacturer accessories or using accessories from other providers approved by the manufacturer. The user bears the risk of using accessories which are not approved.
Risk of crushing
-
Do not hold the hinge when opening and closing the door. Fingers may get caught.
Specialist personnel qualifications:
The appliance may only be installed, tested, maintained, and commissioned by specialist personnel who are familiar with the installation, commissioning, and opera‐ tion of the appliance. Specialist personnel are persons who, on account of their specialist training, knowl‐ edge and experience as well as their knowl‐ edge of the relevant standards, are able to assess and perform the work assigned to them and identify potential hazards. They must have training, instruction, and author‐ isation to work on the appliance.
Symbols on the appliance:
This symbol may be located on the compressor. It relates to the oil in the compressor and makes reference to the
risk that:Swallowing or inhaling
can be fatal. This advice is only rele‐
vant to recycling. There is no danger in normal operation.
* Depending on model and options 5
Page 6
Putting into operation
WARNING: Danger of fire / flammable
materials. This symbol is located on the compressor and indicates the danger of flammable materials. Do not remove the sticker.
The symbol is located on the back of the appliance near the alarm relay and
indicates the following danger: Electric
shock! Even if an appliance is discon‐
nected from the mains there may still be extraneous voltage. Do not remove sticker.
This or a similar sticker may be located on the rear of the appliance. It refers to the foamed-in panels in the door and/or the housing. This advice is only relevant to recycling. Do not remove sticker.
This or a similar sticker may be located on the rear of the appliance. It refers to the Li-ion self-charging battery installed. This advice is only relevant to recycling. Do not remove sticker.
Please note the warning messages and other specific advice in the other chapters:
Indicates an immediately
DANGER
WARNING
CAUTION
NOTICE
Note
hazardous situation which will lead to death or serious injuries if it is not avoided.
Indicates a hazardous situation which will lead to death or serious injuries if it is not avoided.
Indicates a hazardous situation which will lead to minor or moderate injuries if it is not avoided.
Indicates a hazardous situation which may lead to damage to prop‐ erty if it is not avoided.
Indicates useful instructions and tips.
3.1.1 Installation location
Leaking coolant and oil! Fire. The coolant contained in the appliance is eco-friendly, but also flammable. The oil contained in the appliance is flammable. Escaping coolant and oil can ignite if the concentration is high enough and in contact with an external heat source.
u
-
-
-
-
-
-
WARNING
Do not damage the pipelines of the coolant circuit and the compressor.
Do not install appliance in direct sunlight, next to an oven, radiator or similar. The best place for installation is a dry and well ventilated room. If the appliance is installed in a very humid environment, condensation can form on the outside of the appliance. Always ensure good airflow and ventilation in the instal‐ lation location. The more coolant there is in the appliance, the larger the room must be in which the appliance is located. If rooms are too small, any leak may create a flammable mixture of gas and air. For every 8 g of coolant, the size of the installation space must be at least 1 m3. Informa‐ tion regarding the coolant contained is on the type plate inside the appliance. The floor of the location must be horizontal and even.
The installation location must be able to withstand the weight of the appliance plus weight when stocked to maximum level. (see 8.1 Technical specifications)
3.1.2 Electrical connection
Danger of fire due to incorrect positioning! If the mains cable or plug touches the back of the appli‐ ance, the vibration can damage the mains cable or the plug resulting in a short circuit.
u
u
u
u
WARNING
Make sure the mains cable is not trapped under the appli‐ ance when you position the appliance. Stand the appliance so that it is not touched by connec‐ tors or main cables. Do not connect any appliances to sockets in the area of the back of the appliance. Do not place and operate multi-sockets/power distribu‐ tors and other electronic devices (such as halogen trans‐ formers) at the back of the appliances.
3 Putting into operation
3.1 Installation conditions
Fire hazard due to dampness! If live parts or the mains lead become damp this may cause short circuits.
u
6 * Depending on model and options
WARNING
The appliance is designed for use in enclosed areas. Do not operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions.
Page 7
Putting into operation
3.2 Appliance dimensions
SRFvh 4001/4011
A B C D E F
1884 mm 597 mm 664 mm 1203 mm 23 mm 1241 mm
3.5 Removing transport lock
Fig. 4
u
Pull tab Fig. 4 (1) forwards.
u
Take off transport lock Fig. 4 (2) in upwards direction.
w
Base holder remains on the appliance.
3.6 Installing door handle
SRFvh 5501/5511
A B C D E F
1793 mm 747 mm 779 mm 1468 mm 23 mm 1506 mm
A = appliance height including feet/castors B = appliance width without handle (handle depth = 45 mm) C = appliance depth without handle (handle depth = 45 mm) D = appliance depth with door open E = hinge height F = appliance depth with protruding handle and anti-tipping
device
3.3 Transporting appliance
Risk of injury due to broken glass!* When transporting at an altitude of more than 1500 m, the glass panes of the door may break. This can result in sharp­edged fragments, which can cause serious injuries.
u
u u
u u
WARNING
Take appropriate protective action.
On initial setup: Transport the appliance in its packaging. When transporting after initial setup (e.g. relocation): Transport the appliance unloaded. Transport the appliance upright. Use two people to transport the appliance.
3.4 Unpacking appliance
u
Check the appliance and the packaging for damage during transport. Contact the supplier immediately if you suspect any damage. Do not connect appliance to the power supply.
u
Remove all materials from the back or the side walls of the appliance that may prevent proper installation or prevent air flow and ventilation.
Fig. 5
u
Attach handle from accessory kit to the door using the screws Fig. 5 (1) supplied.
u
Put on covers Fig. 5 (2).
3.7 Mounting anti-tipping device
Tools
Fig. 6
Prevent appliance from tipping over.
* Depending on model and options 7
Page 8
Putting into operation
Fig. 7
The anti-tipping device, consisting of two retaining parts, two retaining hooks and four screws (4 x 14), is included with the appliance.
Fig. 10
Use fixing material (e.g. dowels) which is appropriate for the nature of the wall (wood, concrete) and suffi‐ cient attachment points Fig. 10 (2).
u
Attach retaining hooks. Fig. 10 (1)
3.8 Installing appliance
Fig. 8
u
Mount retaining parts Fig. 8 (1) on the appliance using the screws supplied.
u
Push appliance with retaining parts mounted against the wall.
Fig. 9
u
Make markings on the wall Fig. 9 (1).
u
Remove appliance.
Risk of injury and damage.
u
Use 2 people to install appliance.
CAUTION
Risk of injury and damage. The door can knock against the wall and become damaged as a result. In the case of glass doors, the damaged glass can cause injuries.
u
Protect the door from knocking against the wall. Attach door stopper, e.g. felt stopper, to the wall.
u
Connect all necessary components (e.g. mains cable) to the back of the appliance and route to the side.
Note
Cables can be damaged.
u
Do not jam the cable when pushing the appliance back.
CAUTION
Fig. 11
u
Slide appliance up against the wall so that the retaining parts latch into the securing hooks.
w
The appliance is now secured against tipping.
w
It can be released by folding back the securing hooks.
8 * Depending on model and options
Page 9
3.9 Setting up the appliance so it is level
NOTICE
Appliance body is deformed and door does not close.
u
Align appliance horizontally and vertically.
u
Compensate for uneven floors using adjustable feet.
Incorrect height adjustment of the adjustable foot! Can cause severe or even fatal injury. Incorrect height adjustment can cause the bottom part of the adjustable foot to come loose and the appliance to tip over.
u
Fig. 12 *
Raising appliance:
u
Lowering appliance:
u
WARNING
Do not unscrew the adjustable foot too far.
Turn adjustable foot clockwise.
Turn adjustable foot anticlockwise.
Putting into operation
u
Keep the invoice so you have the appliance and dealer information available if needed.
3.12 Disposing of packaging
Danger of suffocation due to packing material and plastic film!
u
The packaging is made of recyclable materials:
-
-
-
-
-
u
3.13 Reversing the door
Tools
WARNING
Do not allow children to play with packing material.
corrugated board/cardboard expanded polystyrene parts polythene bags and sheets polypropylene straps nailed wooden frame with polyethylene panel* Take the packaging material to an official collecting
point.
3.10 Installing multiple appliances
NOTICE
Risk of damage due to condensation between the side walls.
u
Do not install the appliance directly next to another fridge.
u
Install appliances with a space 3 cm between appliances.
u
Only install multiple appliances up to temperatures of 35 °C and 65% humidity next to one another.
u
At higher levels of humidity, increase space between appliances.
Fig. 13 Side-by-side installation
Fig. 14
WARNING
Risk of injury if the door is not reversed correctly!
u
The door may only be reversed by qualified personnel.
WARNING
Risk of injury and material damage due to heavy door!
u
Only perform the conversion if you can carry a weight of 25 kg.
u
Always have someone help you carry out the conversion.
NOTICE
Live parts! Damage to electrical components.
u
Disconnect the power plug before reversing the door.
u
Open the door.
Note
A side-by-side kit is available as an accessory via Liebherr Customer Service. (see 8.3 Customer Service)
3.11 After installation
u
Take off the protective film from the exterior of the appli‐ ance.
u
Clean appliance. (see 7.3 Cleaning the appliance)
u
If necessary: Disinfect the appliance.
* Depending on model and options 9
Page 10
Putting into operation
Fig. 15
u
Unlatch the front covers Fig. 15 (1) on the inside and remove them sideways.
u
Lift off the upper cover Fig. 15 (2).
Fig. 18
u
Connect the plug Fig. 18 (1) to the circuit board.
Fig. 16
u
Unlatch the middle cover and remove it.
Fig. 17
u
Disconnect the plug Fig. 17 (1) from the circuit board.
Fig. 19
u
Unscrew the door latch Fig. 19 (1).
u
Unlatch the cover Fig. 19 (1) with a small screwdriver and remove it.
10 * Depending on model and options
Page 11
Fig. 20
u
Remove the plug from the plug holder.
Fig. 21 The installation position of the plug holder can be rotated by 180°.
u
Disengage the plug holder.
Putting into operation
Fig. 24
u
Unscrew the hinge Fig. 24 (1).
u
Lift the door with the hinge straight up by Fig. 24 (2) roughly 200 mm and take it off.
u
Carefully place the door on a soft surface.
Fig. 22
u
Snap in the plug holder Fig. 22 (1) on the opposite side.
Fig. 23
u
Put the lock and cover on the opposite side.
NOTICE
Risk of injury if the door tips out!
u
Hold the door.
Fig. 25
u
Carefully pull out the cable.
Fig. 26
u
Pull out the hinge.
* Depending on model and options 11
Page 12
Putting into operation
Fig. 27
u
Pull out the hinge bushing Fig. 27 (1) with your fingers.
u
Carefully lift the cover plug Fig. 27 (2) with a slotted screwdriver and pull it out.
Fig. 29 Insulated door*
Fig. 28
u
Insert hinge bushing and cover plug on the opposite side (the flattened sides face outwards).
Fig. 30 Glass door*
u
Remove the panels.
u
Unscrew the handle.
12 * Depending on model and options
Page 13
Putting into operation
Fig. 31
u
Put the stopper on the opposite side.
Fig. 32 Insulated door*
Note
The holes are pre-marked and must be pierced with the self-tapping screws.
Fig. 35
u
Move the hinge to the opposite side.
Fig. 33 Glass door*
u
Screw the handle onto the opposite side.
u
Attach the panels.
Risk of injury and material damage if the door tips out!
u
Tighten the bearing pins to the specified torque.
Fig. 36
u
Put the pin back into the hinge Fig. 36 (1).
u
Tighten the pin Fig. 36 (2) to a torque of 12 Nm.
u
Unscrew the hinge again.
NOTICE
Risk of injury due to tensioned spring!
u
Do not disassemble the door closing system Fig. 37 (1).
WARNING
Fig. 34
u
Put the closing bracket on the opposite side.
* Depending on model and options 13
Page 14
Putting into operation
Fig. 37
u
Turn the closing system Fig. 37 (2) until it clicks.
w
The tension of the closing system is released.
u
Unscrew the hinge Fig. 37 (3).
Fig. 38
u
Put the door closing system in the hinge.
u
Make sure the pin chamfer Fig. 38 (1) faces the round hole when you put it in.
Fig. 40
u
Screw the hinge onto the opposite side.
Note
Correct alignment and tension are important for the closing system to work properly.
Fig. 41 Left-hinged (A) / Right-hinged (B)
u
Turn the closing system against the resistance until the bar of the closing system Fig. 41 (1) points outwards.
w
The closing system automatically stays in this position.
w
The closing system is now aligned and tensioned.
Fig. 39
u
Put the cover plate on the opposite side.
Fig. 42
u
Put the hinge into the door.
14 * Depending on model and options
Page 15
Fig. 43
u
Carefully push the cable through.
NOTICE
Risk of injury if the door tips out!
u
Hold the door.
Putting into operation
Fig. 45
u
Feed the cable through the recess in the hinge and lay it carefully Fig. 45 (1).
u
Screw on the hinge Fig. 45 (2).
Fig. 46
u
Put the plug Fig. 46 (1) in the plug holder.
Fig. 44
u
Together with a second person, lift the door from the ground.
u
Carefully put the door on the closing system with the door opened at a 90° angle.
NOTICE
Material damage due to incorrect mounting!
u
Do not pinch the cable when mounting the hinge.
Fig. 47
u
Connect the plug Fig. 47 (1) to the circuit board.
Fig. 48
u
Set the cover back in place.
* Depending on model and options 15
Page 16
Putting into operation
Fig. 49
u
Screw on the door latch.
Fig. 52
u
Hook in the front covers Fig. 52 (1) on the side and snap them into place on the inside.
u
Snap on the top cover Fig. 52 (2) from above.
u
Close the door.
w
The door has now been reversed.
3.14 Aligning the door
If the door is not straight, you can adjust it on the lower hinge.
Fig. 50
u
Open the door.
Fig. 51
u
Snap in the middle cover.
Fig. 53
u
Remove the middle screw on the lower hinge.
Fig. 54
u
Slightly undo both screws and move the door with the hinge to the left or right.
u
Fully tighten the screws (the middle screw is no longer needed).
w
The door is now straight.
16 * Depending on model and options
Page 17
Putting into operation
3.15 Connecting appliance
Failure to connect properly Fire hazard.
u u
NOTICE
Failure to connect properly Damage to the electronics.
u
Note
Only use the supplied mains cable.
Make sure the following prerequisites are met:
- The appliance is operated using alternating current only.
- The permitted voltage and frequency is printed on the
- The socket is earthed according to the regulations and
- The fuse tripping current is between 10 A and 16 A.
- The socket is easily accessible.
u u
u w
WARNING
Do not use an extension cable. Do not use distributor blocks.
Do not connect the appliance to a stand-alone inverter, e.g. solar power systems and petrol generators.
type plate. The type plate position can be seen in the appliance overview chapter. (see 1.2 Overview of appli‐ ance and equipment)
fused.
Check the electrical connection. Insert the appliance plug into the back of the appliance. Ensure that they latch into place. Connect the mains plug to the power supply. The display switches to the standby symbol.
- Polish
- Czech
- Russian
- Chinese
- Japanese
Fig. 56
u
Complete steps (see Fig. 5462) .
w
Language is set.
Fig. 57
u
Complete steps (see Fig. 5463) .
w
Date is set.
3.16 Switching on appliance (first use)
Make sure that the following requirements are fulfilled:
- Appliance is installed and connected.
- All adhesive strips, adhesive and protective films and transport locks are removed from inside and outside the appliance.
Fig. 55 Startup process
The standby symbol flashes until the startup process is complete.
The standby symbol is shown in the display. If the appliance has been supplied with factory settings,
the screen language and the date/time first need to be set when using the appliance for the first time.
The following languages are available:
- English
- Spanish
- French
- German
- Dutch
- Danish
- Italian
Fig. 58
u
Complete steps (see Fig. 5464) .
w
Time is set.
Fig. 59 Status display
w
The appliance is ready for operation once the tempera‐ ture appears in the display.
* Depending on model and options 17
Page 18
Storage
4 Storage
4.1 Information regarding storage
Fig. 60 Fig. 61
When stocking observe the following:
If there are adjustable shelves Fig. 60 (1), position them
q
as required. Observe maximum load. (see 8.1 Technical specifications)
q
Do not load appliance until storage temperature has been
q
reached (maintain cold chain). Ventilation slots Fig. 61 (2) for recirculation fan in the
q
interior must be kept clear. Items for refrigeration must not come into contact with
q
the evaporator on the rear wall. Keep liquids in closed containers.
q
Leave space when storing items for refrigeration to
q
ensure good air circulation. Do not stack refrigerated products above the indicated
q
height. This is important for free air circulation and even temper‐ ature distribution in the interior.
4.2 Storage times
The best-before date specified on the packaging should be used as the reference point for the storage time.
5 Controls
5.1 Control and display elements
The display provides a quick overview of the current appli‐ ance status, the temperature setting, the status of func‐ tions and settings as well as alarm and error messages.
It is operated by swiping or pressing the colour touch display directly.
Functions can be activated or deactivated and setting values can be changed.
Status display
(1)
5.1.1 Status display
Fig. 63 Status display
Actual temperature (3) Defrosting status
(1) (2) Alarm status (4) Door opening status
The status display is the home display. It displays the actual temperature in the centre and three
symbols in the lower area. The status display may show a further range of display symbols.
You navigate from the status display to the functions and settings. (see 5.2 Navigation)
5.1.2 Display symbols
Display symbols provide information about the status of the appliance.
Symbol
Appliance status
Standby symbol
Appliance is switched off.
Standby symbol (flashing)
Appliance is starting up.
Temperature (flashing)
Target temperature not yet reached. Appliance cooling to temperature set.
Temperature display
Displays the current inte‐ rior temperature
D in the display
Appliance is in Demo‐ Mode.
Maintenance display (yellow)
The time interval set has expired.
Full data memory (yellow)
The data memory (999 hours) is full. From now, the oldest data will be overwritten.
Full alarm memory (yellow)
The alarm memory is full. Delete individual alarms or entire memory.
Fig. 62 Colour touch display
18 * Depending on model and options
Page 19
Controls
Symbol Appliance status
Error symbol (red)
Appliance is in error state.
Back arrow
Leads to higher-level menu.
Background (blue)
Active setting or active function
Bar (increasing)
Press for 3 seconds to activate setting.
Bar (decreasing)
Press for 3 seconds to deactivate setting.
Status display symbols
The additional symbols at the bottom edge of the status display enable quick access to alarm information and details of the appliance state.
Symbol
Appliance status
Alarm symbol (grey)
Alarm archive is empty. Pressing briefly opens the alarm archive.
Alarm symbol (white)
There are confirmed alarms in the alarm archive.
Pressing briefly opens the alarm archive.
Alarm symbol (red)
There are still unconfirmed alarms in the alarm archive.
Pressing briefly opens the alarm archive.
Alarm symbol (red, flashing)
There is an active alarm in the archive. Pressing briefly opens the alarm archive.
Defrosting symbol (grey)
No active defrosting process.
Defrosting symbol (white, flashing)
Manual defrosting process active. Pressing briefly opens the manual
defrosting. (see 5.3.20 Defrosting )
Defrosting symbol (white)
Automatic defrosting process active. Func‐ tion cannot be aborted.
Door symbol (grey)
The door is closed.
Door symbol (white)
The door is open.
Symbol Appliance status
Door symbol (red, flashing)
The door has been open for a prolonged period of time; the relevant warning message has been acknowledged.
The symbol flashes until the door is closed.
Additional status display symbols
5.1.3 Acoustic signals
A signal sounds in the following cases:
If a function or a value is confirmed.
-
If a function or a value can either not be activated or not
-
deactivated. As soon as an error occurs.
-
If there is an alarm message.
-
The alarms can be switched on and off in the customer menu.
5.2 Navigation
Navigate in the menu to access the individual functions. Operate directly via the colour touch display by swiping and pressing with your fingers.
5.2.1 Navigation with the touch display
Navigation
Press briefly
Long press
Swipe
Description
Touch screen briefly with your finger.
Activate/deactivate function Confirm selection. Open submenu.
Touch screen with your finger for 3 seconds.
Activate/deactivate function (increasing/decreasing bar is displayed at the top of the screen)
Confirm selection. Reset appliance/values. Switch appliance on/off.
Swipe left or right
Navigate in the menu. Search for values.
Touch Back symbol briefly with your finger.
Jump back one level in the menu.
Touch Back symbol with your finger for 3 seconds.
Jump back to the status display.
* Depending on model and options 19
Page 20
Controls
5.2.2 Settings menu
The following functions can be accessed through the settings menu:
Temperature (see 5.3.3 Temperature )
-
Temperature alarm (see 5.3.23 Temperature alarm )
-
Door alarm (see 5.3.24 Door alarm )
-
Light alarm (see 5.3.25 Light alarm )
-
Alarm simulation (see 5.3.26 Alarm simulation )
-
External alarm monitoring (see 5.3.28 Alarm relay )
-
Calibration (see 5.3.22 Sensor calibration )
-
Lighting (see 5.3.5 Lighting )
-
Maintenance interval reminder (see 5.3.8 Maintenance
-
interval reminder ) Language (see 5.3.9 Language )
-
Date and time (see 5.3.10 Date and time )
-
Temperature unit (see 5.3.11 Temperature unit )
-
Display brightness (see 5.3.12 Display brightness )
-
Data backup (see 5.3.21 Data download / Datalogging )
-
LAN connection (see 5.3.16 LAN connection ) *
-
WiFi connection (see 5.3.15 WiFi connection ) *
-
Switch off appliance (see 5.3.2 Switching appliance on
-
and off )
Opening settings menu
u
Swipe left or right until corresponding function is displayed.
Fig. 64
u
Complete steps (see Fig. 5470) .
-or-
u
Enter access protection PIN code for settings menu. (see 5.3.6 Settings menu access protection )
w
The settings menu is opened. From here you can access all of the functions named above.
Settings menu access protection
(see 5.3.6 Settings menu access protection )
Fig. 65
u
Complete steps (see Fig. 5471) .
w
The hidden customer menu is opened. From here you can access all the specific menus.
5.2.4 General rules
The following general rules apply in addition to the gestures available:
Once a value has been selected, the selection is
-
displayed for 2 seconds. The display then jumps back one level. There is a return to the status display after 10 seconds
-
with no interaction If a selection is confirmed in a submenu, the display
-
switches back to the menu. Activated functions and selected values are highlighted
-
blue. Error/alarm/warning messages are highlighted red.
-
Instructions/reminders are highlighted yellow.
-
Long press to activate functions: increasing bar is
-
displayed on the screen. Long press to deactivate functions: decreasing bar is
-
displayed on the screen.
5.3 Functions
5.3.1 Overview of functions
Switch appliance on and off
Reset recording
5.2.3 Customer menu
The customer menu makes it possible to call up the following hidden information and settings by entering the numerical code 151:
Operating hours (see 5.3.18 Operating hours )
-
Software version (see 5.3.19 Software )
-
Settings menu access protection (see 5.3.6 Settings
-
menu access protection ) Change code for settings menu access protection.
-
(see 5.3.7 Access codes) Alarm sounds (see 5.3.13 Alarm Sound )
-
Confirmation sounds (see 5.3.14 Key Sound )
-
Door open lighting (see 5.3.5 Lighting )
-
Defrosting info (see 5.3.20 Defrosting )
-
Sensor Info (see 6.2 Sensors)
-
DemoMode (see 5.3.29 DemoMode )
-
Factory reset (see 5.3.30 Factory reset )
-
Opening customer menu
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
20 * Depending on model and options
Manually starts automatic defrosting
Settings Access to this function can be blocked using
a PIN code. (see 5.3.6 Settings menu access protection )
Info
Temperature setting
Temperature alarm
Page 21
Controls
Door alarm
Light alarm
Alarm simulation
Alarm relay
Alarm log
Sensor calibration
Maintenance interval
Lighting
Activate/deactivate settings lock
Alarms
Button sounds
Door light
Defrost information
Sensor Info
DemoMode
Factory reset
Language
Date/time
Temperature unit
Screen brightness
Data download
LAN *
WiFi *
System status
5.3.2 Switching appliance on and off
This function makes it possible to switch the entire appli‐ ance on and off.
Switching on appliance Without activated DemoMode:
Fig. 66
u
Complete steps (see Fig. 5472) .
With activated DemoMode:
Fig. 67
u
Complete steps (see Fig. 5473) .
Note
Software
Settings lock PIN code change
Deactivate DemoMode before countdown finishes.
Fig. 68 Status display
w
The temperature appears in the display.
* Depending on model and options 21
Page 22
Controls
Switching off appliance
u
Swipe left or right on the display until the corresponding function is displayed.
Fig. 69
u
Complete steps (see Fig. 5475) .
w
The standby symbol appears in the display.
5.3.3 Temperature
The temperature depends on the following factors:
How often the door is opened
-
How long the door is open for
-
The room temperature of the installation site
-
The type, temperature and amount of refrigerated food
-
Note
The temperature may differ from the temperature displayed in some areas of the interior.
At the correct temperature, cooled produce will keep for longer. This avoids disposing of food unnecessarily.
5.3.4 Temperature recording
The appliance displays the minimum and maximum temper‐ atures of the interior via this function. The recording of these temperatures starts automatically after the appliance is switched on; they are recorded at one minute inter‐ vals. A note indicating that the data memory is full is displayed after 999 hours (approx. 40 days). The tempera‐ ture recording should then be reset.
Note
The entire temperature history as well as alarm and service messages are also recorded independently of this function. This data can be exported and backed up on a USB storage medium. (see 5.3.21 Data download / Datalogging )
If there is an additional product sensor installed on the appliance, there is the option of selecting this sensor to display the minimum and maximum temperatures. (see 5.3.22 Sensor calibration )
Note The temperature recording should be reset once after reaching the set temperature when the appliance
is commissioned. (see 5.3.4.2 Resetting temperature recording) This ensures that the value for the maximum temperature is a meaningful value.
Displaying temperature recording
The temperature recording displays the length of the recording and the minimum and maximum temperatures measured during this period of time.
Setting temperature
The following steps describe how to increase the tempera‐ ture, e.g. from 12.1 °C to 15.5 °C.
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 71
u
Swipe left or right until corresponding function is displayed.
w
Status screen with the temperature recordings is displayed.
Resetting temperature recording
The displayed minimum and maximum temperatures can be reset at any time. This deletes the displayed values and the recording interval starts again.
u
Swipe left or right until corresponding function is displayed.
Fig. 70
u
Complete steps (see Fig. 5476) .
w
Temperature is set.
Fig. 72
u
Complete steps (see Fig. 5478) .
w
Temperature recording is reset.
22 * Depending on model and options
Page 23
Controls
5.3.5 Lighting
The appliance is fitted with interior lighting. You can keep the interior lighting on continuously.
(see 5.3.5.1 Switching on lighting*) * When you open the appliance door, the interior lighting
switches on. You can also deactivate this function. (see 5.3.5.3 Switching off the lighting when opening the door)
Switching on lighting*
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 73
u
Complete steps (see Fig. 5479) .
w
Lighting is switched on.
Switching off lighting*
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
5.3.6 Settings menu access protection
This function enables the settings menu access protection via a four-digit PIN code.
Application:
Prevent settings and functions being changed uninten‐
-
tionally. Prevent appliance being switched off unintentionally.
-
Prevent temperature being set unintentionally.
-
Activating the settings menu access protection
Note
u
In the following example, the factory-set PIN code: 1 1 1 1 is used.
u
Call up customer menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 74
u
Complete steps (see Fig. 5480) .
w
Lighting is switched off.
Switching off the lighting when opening the door
u
Call up customer menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 75
u
Complete the steps (see Fig. 5481) .
w
The lighting is switched off when the door is opened.
Switching on the lighting when opening the door
u
Call up customer menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 77
u
Complete steps (see Fig. 5483) .
w
Settings menu access protection is activated.
Changing the access protection PIN code for the settings menu
(see 5.3.7 Access codes)
Deactivating the settings menu access protection
Note
u
In the following example, the factory-set PIN code: 1 1 1 1 is used.
u
Call up customer menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 76
u
Complete the steps (see Fig. 5482) .
w
The lighting is switched on when the door is opened.
* Depending on model and options 23
Page 24
Controls
Fig. 78
u
Complete steps (see Fig. 5484) .
w
Settings menu access protection is deactivated.
Opening protected settings menu
If the settings menu access protection is active, it is necessary to enter the PIN code to open the settings menu.
The settings menu remains unlocked for 20 minutes after entering the correct PIN code.
Note
u
In the following example, the PIN code is: 2 3 4 5.
Access protection for the settings menu must be active.
u
Swipe left or right until corresponding function is displayed.
Fig. 80
u
Complete steps (see Fig. 5486) .
w
Entry of the old settings code successful.
Fig. 79
u
Complete steps (see Fig. 5485) . Enter PIN code.
w
The PIN code is correct.
w
The settings menu opens.
5.3.7 Access codes
Various settings are possible. Application:
Changing the setting code.
-
Resetting the setting code.
-
Settings menu access protection
Changing the settings code
This setting allows the setting code for settings menu access protection to be changed.
The setting is made in three stages:
- Entering the old settings code
- Entering the new settings code
- Confirming the new settings code
Note
u
In the following example, the default factory-set settings code 1 1 1 1 is changed.
u
The new settings code is: 2 3 4 5
u
Call up customer menu. (see 5.2 Navigation)
The settings menu access protection must be active.
(see 5.3.6 Settings menu access protection )
u
Swipe left or right until corresponding function is displayed.
Fig. 81
u
Complete steps (see Fig. 5487) .
w
Entry of the new settings code successful.
Fig. 82
u
Complete steps (see Fig. 5488) .
w
Confirmation of the new settings code successful.
w
The settigs code has been changed.
Resetting the setting code
The setting code for the settings menu access protection has been forgotten or is not known.
u
Reset appliance to factory settings (see 5.3.30 Factory reset ) .
w
The appliance is reset to the original settings.
w
The factory-set setting code is: 1 1 1 1
24 * Depending on model and options
Page 25
5.3.8 Maintenance interval reminder
Setting for the time interval after which a maintenance reminder is issued.
The following values can be set:
7 days
-
14 days
-
30 days
-
60 days
-
90 days
-
180 days
-
360 days
-
720 days
-
1080 days
-
Off
-
Setting maintenance interval reminder
The following steps describe how the maintenance interval is set.
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Controls
Fig. 84
u
Complete steps (see Fig. 5490) .
w
The selected language is set.
5.3.10 Date and time
This setting makes it possible to set the date and time.
Setting date and time
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 85
u
Complete steps (see Fig. 5491) .
Fig. 83
u
Complete steps (see Fig. 5489) .
w
The time interval, after which the maintenance reminder is issued, is set.
w
The remaining time is displayed.
5.3.9 Language
This setting allows the display language to be set.
Setting language
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 86
u
Complete steps (see Fig. 5492) .
w
Date has been set.
Fig. 87
u
Complete steps (see Fig. 5493) .
w
Time has been set.
5.3.11 Temperature unit
This setting allows the temperature unit to be changed between degrees Celsius and Fahrenheit.
Setting temperature unit
The example shows how you change the temperature unit from degrees Celsius to Fahrenheit.
u
Call up settings menu. (see 5.2 Navigation)
* Depending on model and options 25
Page 26
Controls
u
Swipe left or right until corresponding function is displayed.
Fig. 88
u
Complete steps (see Fig. 5494) .
w
The temperature unit is set as Fahrenheit.
5.3.12 Display brightness
This setting allows the display brightness to be adjusted incrementally.
The following brightness values can be set:
40%
-
60%
-
80%
-
100% (default)
-
Setting display brightness
The following steps describe how to reduce the display brightness, e.g. from 100 % to 40 %.
u
Call up settings menu. (see 5.2 Navigation)
u
Tap navigation arrow repeatedly until corresponding function is displayed.
u
Complete steps (see Fig. 5496) .
w
Alarm Sound is activated.
Deactivating Alarm Sound
u
Call up customer menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 91
u
Complete steps (see Fig. 5497) .
w
Alarm Sound is deactivated.
5.3.14 Key Sound
This function makes it possible to switch all button sounds, confirmation sounds, and the startup sound on and off.
Activating Key Sound
u
Call up customer menu. (see 5.2 Navigation)
u
Swipe left or right on the display until the corresponding function is displayed.
Fig. 92
u
Complete steps (see Fig. 5498) .
w
Key Sound is activated.
Deactivating Key Sound
u
Call up customer menu. (see 5.2 Navigation)
Fig. 93
u
Complete steps (see Fig. 5499) .
w
Fig. 89
u
Complete steps (see Fig. 5495) .
w
Display brightness changes accordingly.
Key Sound is deactivated.
5.3.15 WiFi connection
5.3.13 Alarm Sound
This function enables all alarm sounds, such as door alarms, to be switched on and off.
Activating Alarm Sound
u
Call up customer menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 90
26 * Depending on model and options
Note
Use of the Liebherr SmartMonitoring Dashboard at https://
smartmonitoring.liebherr.com requires installation of a
SmartModule and a commercial MyLiebherr account. When commissioning online you can register using the login data you have, or register again and create a company account.
This setting establishes a wireless connection between the appliance and the internet. The connection is controlled via the SmartModule. The appliance can be integrated via the browser-based Liebherr SmartMonitoring Dashboard and advanced options as well as customised methods relating to control, administration and monitoring can be used.
Page 27
Fig. 94
Make sure that the following requirements are fulfilled:
SmartModule Fig. 94 (1) is in use.
q
Establishing connection
You commission and set up your SmartModule online via the
Liebherr SmartMonitoring Dashboard on your web-enabled
device.
Controls
Fig. 98
u
Complete the steps (see Fig. 5504) .
w
Connection is established: WiFi connecting appears. The symbol flashes.
u
Follow the Liebherr SmartMonitoring Dashboard instruc‐ tions.
w
Connection is established.
Disconnecting
u
Swipe left or right until corresponding function is displayed.
Fig. 99
u
Complete the steps (see Fig. 5505) .
Fig. 95
u
Open Liebherr SmartMonitoring Dashboard. (see Fig. 5501)
On the refrigerator or freezer:
u
Swipe left or right until corresponding function is displayed.
Fig. 96
u
Complete the steps (see Fig. 5502) .
Note
The settings menu access protection is activated. (see 5.3.6 Settings menu access protection )
u
Enter the chosen PIN code. The settings menu opens.
u
Swipe left or right until corresponding function is displayed.
Note
The settings menu access protection is activated. (see 5.3.6 Settings menu access protection )
u
Enter the chosen PIN code. The settings menu opens.
u
Swipe left or right until corresponding function is displayed.
Fig. 100
u
Complete the steps (see Fig. 5506) .
w
There is no connection.
Resetting connection
u
Swipe left or right until corresponding function is displayed.
Fig. 101
u
Complete the steps (see Fig. 5502) .
Note
The settings menu access protection is activated. (see 5.3.6 Settings menu access protection )
u
Fig. 97
u
Complete the steps (see Fig. 5503) .
u
Continue the set-up procedure on your web-enabled device: Liebherr SmartMonitoring Dashboard
Enter the chosen PIN code. The settings menu opens.
u
Swipe left or right until corresponding function is displayed.
* Depending on model and options 27
Page 28
Controls
Fig. 102
u
Complete the steps (see Fig. 5508) .
w
The WiFi settings are restored to the factory settings.
5.3.16 LAN connection
Note
Use of the Liebherr SmartMonitoring Dashboard at https://
smartmonitoring.liebherr.com requires installation of a
SmartModule and a commercial MyLiebherr account. When commissioning online you can register using the login data you have, or register again and create a company account.
u
Open Liebherr SmartMonitoring Dashboard. (see Fig. 5510)
On the refrigerator or freezer:
u
Swipe left or right until corresponding function is displayed.
Fig. 105
u
Complete the steps (see Fig. 5511) .
Note
The settings menu access protection is activated. (see 5.3.6 Settings menu access protection )
u
Enter the chosen PIN code. The settings menu opens.
u
Swipe left or right until corresponding function is displayed.
This setting establishes a wired connection between the appliance and the internet. The connection is controlled via the SmartModule. The appliance can be integrated via the browser-based Liebherr SmartMonitoring Dashboard and advanced options as well as customised methods relating to control, administration and monitoring can be used.
Fig. 103
Make sure that the following requirements are fulfilled:
SmartModule Fig. 103 (1) is in use.
q
A network cable is connected.
q
Establishing connection
You commission and set up your SmartModule online via the
Liebherr SmartMonitoring Dashboard on your web-enabled
device.
Fig. 106
u
Complete the steps (see Fig. 5512) .
w
Connection is established: LAN connecting appears. The symbol flashes.
u
Follow the Liebherr SmartMonitoring Dashboard instruc‐ tions.
w
Connection is established.
Disconnecting
u
Swipe left or right until corresponding function is displayed.
Fig. 107
u
Complete the steps (see Fig. 5513) .
Note
The settings menu access protection is activated. (see 5.3.6 Settings menu access protection )
u
Enter the chosen PIN code. The settings menu opens.
u
Swipe left or right until corresponding function is displayed.
Fig. 104
28 * Depending on model and options
Page 29
Fig. 108
u
Complete the steps (see Fig. 5514) .
w
There is no connection.
5.3.17 Info
This display shows the model, serial number and service number of the appliance.
Displaying Info
u
Swipe left or right until the corresponding function is displayed.
Controls
Fig. 111
w
The software version is shown.
5.3.20 Defrosting
The appliance defrosts automatically in normal mode. Application:
If there is excessive ice in the interior, the defrosting
-
function can be started manually.
Manually starting automatic defrosting
u
Swipe left or right until corresponding function is displayed.
Fig. 109
w
The appliance information appears.
5.3.18 Operating hours
The display shows the appliance operating hours.
Displaying operating hours
u
Open customer menu .
Fig. 110
w
The operating hours appear.
5.3.19 Software
The display shows the software version of the appliance.
Displaying software version
u
Open customer menu .
u
Swipe left or right until the corresponding function is displayed.
Fig. 112
u
Complete steps (see Fig. 5518) .
w
Automatic defrosting has been started. The appliance automatically switches back to normal mode once defrosting has finished.
Cancelling manually started defrosting
u
Swipe left or right until corresponding function is displayed.
Fig. 113
u
Complete steps (see Fig. 5519) .
w
Manually started defrosting is cancelled. The appliance automatically switches back to normal mode.
Defrosting info
This setting adjusts the display during an automatic defrosting process.
The following display variants are available:
- Def 1: “Automatic defrosting process” symbol is displayed in the status screen. The temperature display is not updated and shows the last temperature before the auto‐ matic defrosting process was started.
- Def 2: “Automatic defrosting process” symbol is displayed in the status screen. The temperature display is updated continuously and shows the actual tempera‐ ture.
- Def 3: The temperature display is not updated and shows the last temperature before the automatic defrosting process was started.
- Def 4: The temperature display is updated continuously and shows the actual temperature.
* Depending on model and options 29
Page 30
Controls
u
Call up customer menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 115
u
Complete steps (see Fig. 5521) .
w
The desired display variant has been selected.
Fig. 114 “Automatic defrosting process” symbol
5.3.21 Data download / Datalogging
The appliance automatically records the entire temperature history of various sensors as well as alarm and service messages. The recording starts automatically after the appliance is switched on and records at one minute inter‐ vals. The data for the past 5 years is stored and can be downloaded onto a USB stick at any time.
The following data sets can be selected for download:
Temperatures
-
Alarms
-
Service messages
-
All
-
The selected data sets are stored in unencrypted format as text files over the entire recording period; these files have the extension „.log“.
Data download on USB stick
Note
Only USB memory sticks may be connected to the USB interface. USB hard drives are not detected.
Fig. 116
u
Complete steps (see Fig. 5522) .
w
Successful data download on USB stick.
w
It is possible to select and download further data sets.
5.3.22 Sensor calibration
The sensor calibration is used to realign differences between the displayed temperature and the actual tempera‐ ture in the appliance.
Setting range for C sensor (control sensor): +/- 3 Kelvin in
0.1 Kelvin increments. Setting range for P sensor (product sensor): +/- 9.9 Kelvin in
0.1 Kelvin increments
Calibrating sensor
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Note
Do not remove the USB storage stick during the download procedure.
Make sure that the following requirements are fulfilled:
USB 2.0 storage stick, FAT32 formatted.
q
USB stick is connected.
q
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 117
u
Complete steps (see Fig. 5523) .
w
C sensor has been calibrated.
30 * Depending on model and options
Page 31
Fig. 118
u
Complete steps (see Fig. 5524) .
w
P sensor has been calibrated.
w
Sensor calibration has been completed.
5.3.23 Temperature alarm
The temperature alarm is triggered as soon as the interior temperature departs from the settable temperature range.
The following values can be set:
Lower temperature limit in 0.1 °C increments
-
Upper temperature limit in 0.1 °C increments
-
Alarm delay time of between 0 and 60 minutes
-
Alarm repetition frequency of between 0 and 30 minutes
-
Setting temperature alarm
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 121
u
Complete steps (see Fig. 5527) .
w
Upper temperature limit has been set.
Fig. 122
u
Complete steps (see Fig. 5528) .
w
Alarm delay time has been set.
Controls
Fig. 119
u
Complete steps (see Fig. 5525) .
u
Swipe left or right until corresponding function is displayed.
Fig. 120
u
Complete steps (see Fig. 5526) .
w
Lower temperature limit has been set.
Fig. 123
u
Complete steps (see Fig. 5529) .
w
Alarm repetition interval has been set.
w
Temperature alarm has been set.
Displaying set temperature alarm values
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 124
u
Complete steps (see Fig. 5530) .
u
Swipe left or right until corresponding function is displayed.
Fig. 125
u
Complete steps (see Fig. 5531) .
w
Set temperature alarm values are displayed.
* Depending on model and options 31
Page 32
Controls
5.3.24 Door alarm
Setting the time interval after which the door alarm sounds when the door is opened.
The following values can be set:
15 seconds
-
30 seconds
-
60 seconds
-
90 seconds
-
120 seconds
-
150 seconds
-
180 seconds
-
Off
-
Setting door alarm
The following steps describe how you set the time interval before the door alarm sounds.
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 129
u
Complete steps (see Fig. 5535) .
w
The door alarm is deactivated.
5.3.25 Light alarm
This setting allows the visual alarm messages in the display to also be emphasised by flashing appliance lighting.
Activating light alarm
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 126
u
Complete steps (see Fig. 5532) .
u
Swipe left or right until corresponding function is displayed.
Fig. 127
u
Complete steps (see Fig. 5533) .
w
The door alarm is set.
Deactivating door alarm
The following steps describe how you deactivate the door alarm.
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 130
u
Complete steps (see Fig. 5536) .
u
Swipe left or right until corresponding function is displayed.
Fig. 131
u
Complete steps (see Fig. 5537) .
w
The light alarm is activated.
Deactivating light alarm
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 132
u
Complete steps (see Fig. 5538) .
u
Swipe left or right until corresponding function is displayed.
Fig. 128
u
Complete steps (see Fig. 5534) .
u
Swipe left or right until corresponding function is displayed.
Fig. 133
u
Complete steps (see Fig. 5539) .
w
The light alarm is activated.
32 * Depending on model and options
Page 33
5.3.26 Alarm simulation
This setting makes it possible to simulate a change in the appliance temperature to check the function of any safety devices that may be connected.
Starting alarm simulation
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
Fig. 134
u
Complete steps (see Fig. 5540) .
u
Swipe left or right until corresponding function is displayed.
Controls
u
Via the display symbol at the bottom edge of the status display.
Fig. 136
u
Complete steps (see Fig. 5542) .
w
The querying and deletion of an alarm has been performed.
Displaying alarm log and deleting all alarms
u
Swipe left or right until corresponding function is displayed.
-or-
u
Via the display symbol at the bottom edge of the status display.
Fig. 135
u
Complete steps (see Fig. 5541) .
w
The simulation has been performed.
w
Connected safety devices should have triggered.
5.3.27 Alarm log
This setting makes it possible to query and delete the last 10 alarms that have occurred on the device.
The following is displayed:
Current date and time
-
Active alarms (red).
-
Past alarms, which have not yet been queried, are shown
-
as unconfirmed (red). Confirmation is given by swiping to the next error. Alarms, which have been queried, are shown as
-
confirmed. Deletion of all alarms (including active and unconfirmed
-
alarms).
Displaying alarm log and deleting an alarm
u
Swipe left or right until corresponding function is displayed.
-or-
* Depending on model and options 33
Fig. 137
u
Complete steps (see Fig. 5543) .
w
The querying and deletion of all alarms has been performed.
Page 34
Controls
5.3.28 Alarm relay
This setting makes it possible to relay one or more alarms to an external alarm source connected to the appliance.
The following settings can be selected:
Alarm type:
-
Door alarm
•
Temperature alarm
•
Door alarm and temperature alarm
•
All
•
Confirm:
-
Yes: Alarm is stopped on the appliance and on the
•
externally connected appliance. No: Alarm is acknowledged on the appliance and
•
remains active on the external appliance until the error is remedied.
Update (only visible if “Yes” is selected in response to
-
Confirm):
Yes: Alarm is recurring according to the set time.
•
(see 5.3.24 Door alarm ) No: Alarm is continuously acknowledged.
•
Activating alarm relay
u
Call up settings menu. (see 5.2 Navigation)
u
Swipe left or right until corresponding function is displayed.
u
Complete steps (see Fig. 5544) .
w
The alarm relay has been set.
5.3.29 DemoMode
If the appliance is in DemoMode all refrigeration functions are deactivated. This is useful for example for demonstra‐ tions.
Activating DemoMode
u
Call up customer menu.
u
Swipe left or right until corresponding function is displayed.
Fig. 139
u
Complete steps (see Fig. 5545) .
Fig. 140 Status display
w
DemoMode is activated.
w
The status display is shown with a “D” in the top left.
Deactivating DemoMode
u
Call up customer menu.
u
Swipe left or right until corresponding function is displayed.
Fig. 141
u
Complete steps (see Fig. 5547) .
Fig. 142 Status display
w
DemoMode is deactivated.
w
The status display appears.
5.3.30 Factory reset
This function resets the appliance to the factory settings. All settings made to this point are reset to their original
Fig. 138
34 * Depending on model and options
values.
Page 35
u
Performing factory reset
u
Call up customer menu.
u
Swipe left or right until corresponding function is displayed.
Complete steps (see Fig. 5549) .
w
Factory reset is completed.
w
Applance restarts.
5.4 Message
5.4.1 Warnings
Warnings are issued by means of an acoustic signal and visually via a symbol on the display. The signal gets louder
Fig. 143
Message (red) Cause Remedy
This message appears if the door is open for too long.
Door open
This message appears if the temperature does not match the set temperature. Reasons for differences in temperature can be:
Temperature alarm
Warm produce for cooling has been placed inside.
Too much warm room air flowed in when rearranging and removing food.
The power was cut off for a prolonged period.
until the warning is acknowledged.
Close the door. Press briefly Alarm is stopped.
Note
You can set how long it takes for this message to appear (see 5.3.24 Door alarm ) .
Press briefly Information about errors and appliance status are
displayed. Press briefly Warmest/coldest temperature, date and time are
displayed. Press briefly The status screen is displayed. The current temperature and the alarm symbol
flash red until the set temperature is reached. Check the quality of the refrigerated goods.
Controls
* Depending on model and options 35
Page 36
Controls
Message (red) Cause Remedy
The appliance is faulty, there is an appli‐ ance error or a component of the appliance has a fault.
Error
The message indicates that freeze protec‐ tion mode is active (e.g. due to frequent door openings or loading with goods).
Store the cooled produce elsewhere.
Press briefly The error code (e.g. BT021) is
displayed. Press briefly
A further error code is displayed if there is one
or
Status screen is displayed with flashing error symbol.
Swiping or tapping the display will show the error code(s) again.
Make a note of the error code(s) and contact customer service. (see 8.3 Customer Service)
Press briefly FRZ.PROT is displayed.
Press briefly Status screen is displayed
with flashing error symbol.
Power cut
Defrost error
Swiping or tapping the display will show the message again.
After a few hours, the appliance automatically switches to the normal operating mode and the message disappears. Alternatively, prolonged pressing will exit the mode and close the message. Contact customer service if the message is displayed again. (see 8.3 Customer Service)
The message appears following an inter‐ ruption to the electricity supply.
The automatic defrosting is not working properly. The previous five defrost cycles were not successful.
Wi-Fi connection is interrupted. Check connection.
Press briefly Battery’s state of charge, information about
errors and appliance status are displayed Press briefly Highest temperature, time period and number of
electricity supply interruptions are displayed. Press briefly The status screen is displayed. The current temperature and the alarm symbol
flash red until the set temperature is reached. Check the quality of the refrigerated goods.
Press briefly. Alarm is stopped. Contact customer service (see 8.3 Customer
Service) .
Press briefly. Alarm is stopped.
WiFi error
36 * Depending on model and options
Page 37
Message (red) Cause Remedy
This message appears if there is no internet connection via WiFi.
WWW error, WiFi
LAN connection is interrupted. Check connection and network cable.
LAN error
This message appears if there is no internet connection via LAN.
WWW error, LAN
Battery voltage too low. Replace battery (see 7.4 Replacing appliance
Battery error
Check connection. Press briefly. Alarm is stopped.
Press briefly. Alarm is stopped.
Check connection. Press briefly. Alarm is stopped.
battery) . Press briefly. Alarm is stopped.
Features
5.4.2 Reminders
Reminders appear when you are being asked to do some‐ thing. The are issued by means of an acoustic signal and visually via a symbol on the display. Acknowledge the message by pressing the confirmation button.
Message (yellow) Cause Remedy
The message appears when the timer for the set maintenance interval has expired.
Maintenance reminder
This message appears when the tempera‐ ture recording memory (999 hours) is full.
Recording reminder
The message appears if there are more than 10 unconfirmed alarm messages.
Alarm log
Press briefly. Reminder is closed.
Note
The maintenance interval can be set (see 5.3.8 Maintenance interval reminder ) .
Press briefly. Reminder is closed. The oldest data is overwritten.
Note
The temperature recording can be reset (see 5.3.4 Temperature recording ) .
Press briefly. Check messages. Reminder is closed.
6 Features
6.1.1 Locking appliance
6.1 Safety lock
The lock in the appliance door is equipped with a safety mechanism.
Fig. 144
u
Insert key.
u
Turn key anticlockwise by 90°.
w
The appliance is locked.
* Depending on model and options 37
Page 38
Features
6.1.2 Unlocking appliance
Fig. 145
u
Insert key Fig. 145 (1).
u
Turn key clockwise by 90° Fig. 145 (2).
w
The appliance is unlocked.
6.2 Sensors
The appliance can be equipped with the following sensors for temperature monitoring:
Safety thermostat sensor
-
C sensor
-
P sensor
-
6.2.1 Safety thermostat sensor
The safety thermostat sensor monitors the temperature drop and thus protects against excessively low tempera‐ tures (Freeze Protect). If the temperature drops below the threshold value, the appliance regulates the temperature automatically. The error message FRZ. PROT (Freeze Protect) (see 5.4 Message) appears.
6.2.2 C sensor (control sensor)
The C sensor is permanently installed and regulates the interior temperature of the appliance. You can calibrate the C sensor if necessary. (see 5.3.22 Sensor calibration )
6.2.3 P sensor (reference sensor)
The P sensor is permanently installed in the interior, in order to record and monitor the temperature in this location specifically. If the set temperature is exceeded in this loca‐ tion, the sensor triggers an alarm. You can calibrate the P sensor if necessary. (see 5.3.22 Sensor calibration )
Fig. 146
u
Complete steps (see Fig. 5552) .
w
C sensor has been selected.
6.3.2 Selecting P sensor
u
Call up customer menu.
u
Swipe left or right until corresponding function is displayed.
Fig. 147
u
Complete steps (see Fig. 5553) .
w
P sensor has been selected.
6.3 Sensor info
This function makes it possible to choose between C sensor or P sensor.
Make sure that the following requirement is met:
P sensor is connected to the appliance. (see 6.4 Inter‐
q
faces)
6.4 Interfaces
There are various connection options on the back of the appliance.
6.3.1 Selecting C sensor
u
Call up customer menu.
u
Swipe left or right until corresponding function is displayed.
Fig. 148
Note
Screws secure the plugs. To enable disconnection of the plugs, loosen the screws on the left and right.
38 * Depending on model and options
Page 39
Fig. 149
Potential-free alarm
(1)
output
(2) Connection for P sensor
6.4.1 Potential-free alarm output
Risk of injury due to electric shock!
u
These three contacts can be used to connect a visual or an acoustic alarm device. The connection is designed for a maximum of 30 V (DC) - 8 A from a safety low voltage source SELV (minimum current 150 mA).
WARNING
The appliance may only be connected to an external alarm device by trained specialist personnel.
Maintenance
Fig. 151
(1) IN+ (measuring line +) (3) FORCE (supply +) (2) IN- (common return
line -)
7 Maintenance
7.1 Maintenance schedule
Maintenance work is to be performed at regular intervals to ensure proper appliance function.
Danger of injury and damage due to unprofessional mainte‐ nance work! Personal injury and material damage.
u
Short-circuit hazard due to live parts! Electric shock or damage to the electronics.
u u
Note
A maintenance reminder function can be activated. (see 5.3.8 Maintenance interval reminder )
CAUTION
Maintenance work may only be performed by trained specialist personnel.
WARNING
Switch off the appliance.
Pull out mains plug or switch off fuse.
Note
We recommend creating a maintenance log in which all work (repairs, checks) performed is documented.
Fig. 150
(1)
NO (normally open) Connection of an alarm indicator lamp or an acoustic alarm signal‐ ling device.
(2) COM (common)
External voltage source
(3) NC (normally closed)
Connection of an indi‐ cator lamp that displays the appliance’s normal mode.
Note
Liebherr recommends yearly maintenance. For an individual offer, please contact Customer Service (see 8.3 Customer Service) .
6.4.2 Connection for P sensor
Component Activity Maintenance interval Sheet metal parts Check for damage and corrosion.
Replacement of damaged parts: (see 8.3 Customer Service)
Door, hinges Check alignment (see 3.14 Aligning the door) , ease of
movement, and tight fit. Lock, door handle Check for ease of movement and tight fit. Yearly Door seal Check for damage, wear, and tight fit.
A replacement door seal is available from customer
service (see 7.4 Replacing appliance battery) .
Yearly
Yearly
Yearly
* Depending on model and options 39
Page 40
Maintenance
Component Activity Maintenance interval Sensor Calibrate sensor. (see 5.3.22 Sensor calibration ) Yearly Sensor feedthrough Check that the sealing compound is intact. Yearly Battery Replace appliance battery.
A replacement battery is available from customer service. (see 7.4 Replacing appliance battery)
Surfaces Cleaning (see 7.3 Cleaning the appliance) Recommendation: monthly or
Surfaces Disinfection Recommendation: monthly or
Installation location, appliance Decontamination
The appliance is suitable for room decontamination with hydrogen peroxide H2O2.
In this context, the values of the following applica‐ tion specifications must not be exceeded:
Concentration: maximum 250 ppm. Humidity: maximum 85%. Maximum permissible room temperature as per
climate class. (see 1.4 Range of use of appliance) Fan air slots Cleaning (see 7.3.3 Cleaning fan cover) Yearly Alarm relay
Sensor Mains cable Check for damage. Yearly
Tilt angle Check for proper function and tight fit. Yearly
Adjusting feet/castors Check for proper function, damage, and tight fit.
Check plug connections for tight fit. Yearly
Replace damaged parts. (see 8.3 Customer Service)
5 to 10 years
as required/specified at instal‐ lation location
as required/specified at instal‐ lation location
Recommendation: as required/ specified at installation location, maximum 2x per year
or if there is a change of location
or if there is a change of location
Yearly
7.2 Defrosting appliance
Improper defrosting of the appliance! Injuries and damage.
u
u
u
Defrosting is performed automatically. The defrost water drains through the opening and evaporates.
If the temperature is set very cold and/or the humidity is very high, the rear wall in the interior may ice up.
Manual defrosting:
u
u u u u
WARNING
Do not use mechanical equipment or other methods to speed up the defrosting process other than those recom‐ mended by the manufacturer. Do not use electrical heating or steam-cleaning appli‐ ances, naked flames or defroster sprays to defrost. Do not use sharp objects to remove ice.
Switch off appliance. (see 5.3.2 Switching appliance on and off ) Pull out mains plug. Store refrigerated items elsewhere. Leave appliance door open during defrosting process. Soak up remaining defrost water with a cloth, clean drain opening and the appliance.
7.3 Cleaning the appliance
7.3.1 Preparing
Short-circuit hazard due to live parts! Electric shock or damage to the electronics.
u u
Risk of fire
u
u u
WARNING
Switch off the appliance.
Pull out mains plug or switch off fuse.
WARNING
Do not damage the refrigeration circuit.
Empty the appliance. Pull out the mains plug.
40 * Depending on model and options
Page 41
Maintenance
7.3.2 Cleaning housing
NOTICE
Improper cleaning! Damage to the appliance.
u
Only use soft cleaning cloths and ph-neutral all-purpose cleaners.
u
Do not uses abrasive sponges or steel wool which may cause scratches.
u
Do not use any sharp or abrasive cleaning agents, nor any that contain sand, chloride or acid.
WARNING
Risk of injury and damage as a result of hot steam! Hot steam can lead to burns and can damage the surfaces.
u
Do not use any steam cleaners!
NOTICE
Risk of damage due to short circuit.
u
When cleaning the appliance, make sure no water gets into the electrical components.
u
Wipe the housing down with soft, clean cloth. If very dirty, use lukewarm water with a neutral cleaner. Glass surfaces can also be cleaned with glass cleaner.
u
Clean condenser coil each year. If the condenser coil is not cleaned, this significantly reduces the efficiency of the appliance.
7.3.3 Cleaning fan cover
NOTICE
Risk of damage due to short circuit.
u
When cleaning the appliance, make sure no water gets into the electrical components.
NOTICE
Improper cleaning! Damage to the appliance.
u
Only use soft cleaning cloths and ph-neutral all-purpose cleaners.
u
Do not uses abrasive sponges or steel wool which may cause scratches.
u
Do not use any sharp or abrasive cleaning agents, nor any that contain sand, chloride or acid.
7.3.4 Cleaning interior
Short-circuit hazard due to live parts! Electric shock or damage to the electronics.
u u
Risk of injury and damage as a result of hot steam! Hot steam can lead to burns and can damage the surfaces.
u
NOTICE
Improper cleaning! Damage to the appliance.
u
u
u
Note
u
Note
Do not damage or remove the type plate on the inside of the appliance. The type plate is important for Customer Service.
u u u
WARNING
Switch off the appliance.
Pull out mains plug or switch off fuse.
WARNING
Do not use any steam cleaners!
Only use soft cleaning cloths and ph-neutral all-purpose cleaners. Do not uses abrasive sponges or steel wool which may cause scratches. Do not use any sharp or abrasive cleaning agents, nor any that contain sand, chloride or acid.
Defrost water drain (see 1.2 Overview of appliance and equipment) : Remove deposits using a thin material (for example a cotton bud).
Open the door. Empty the appliance. Clean interior and equipment parts with lukewarm water and a little detergent. Do not use any gritty or acidic cleaning agent or any chemical solvent.
7.3.5 After cleaning
u
Wipe appliance and equipment parts dry.
u
Connect and switch on appliance. Once the temperature is sufficiently cold:
u
put in items for refrigeration goods.
u
Repeat cleaning regularly.
u
Clean and dust refrigerators with a heat exchanger (metal grille on the rear of the appliance) once per year.
7.4 Replacing appliance battery
In the event of a power failure, the appliance battery is used to record temperature history, alarm and service messages and to show the alarm messages on the display for approx‐ imately 12 hours. During initial commissioning, the battery may take up to 24 hours to charge and be in proper working order.
A replacement battery is available from customer service (see 8.3 Customer Service) .
7.4.1 Replacing battery
Fig. 152
u
Carefully lever out fan covers from the side Fig. 152 (1) and remove towards the front Fig. 152 (2).
u
Rinse the air slots of the fan covers under running water. If very dirty, use lukewarm water with a neutral cleaner.
u
Leave fan covers to air-dry completely.
u
Reattach fan covers to the appliance.
Short-circuit hazard due to live parts! Electric shock or damage to the electronics.
u u
* Depending on model and options 41
WARNING
Switch off the appliance.
Pull out mains plug or switch off fuse.
Page 42
Customer help
Fig. 153
u
Unscrew screws and remove cover from the back of the appliance Fig. 153 (1).
u
Disconnect and remove battery Fig. 153 (2).
u
Install replacement battery.
u
Close cover and screw in screws.
u
Reconnect mains power cable.
Note
u
The battery must be sent for separate waste treatment for batteries and must be disposed of in an expert and proper manner in accordance with the regulations and laws which apply locally. Do not damage or short circuit
the battery!
8 Customer help
Maximum net capacity
See net capacity on the type plate (see 1.2 Overview of appliance and equipment) .
Lighting
Energy efficiency class This product contains one or more energy
efficiency class F light sources
A)
The appliance may contain light sources with different energy efficiency classes. The lowest energy efficiency class is indicated.
WiFi frequency information
Frequency band 2.4 GHz Maximum radiated power <100 mW Purpose of the wireless
equipment
Set-up conditions
Degrees of pollution (surrounding the appliance)
Ambient temperature +10 °C to +35 °C Maximum relative ambient
moisture Maximum operating eleva‐
tion (metres above sea level)
A)
Integration in the local WiFi network for data communi‐ cation
PD2
75%, not condensing
2000 m / 1500 m (glass door)
Light source
LED
8.1 Technical specifications
Temperature range
Refrigeration +3 to +16 °C
Maximum load per shelf Appliance width
(see 3.2 Appliance dimensions)
600 mm 45 kg 40 kg 45 kg 750 mm 60 kg 40 kg 60 kg
A)
Heavier loads may result in a slight bending of the
shelves.
Maximum total load and net weight
Model (see 3.2 Appliance dimensions)
SRF.. 3501* 180 kg* 60 kg* SRF.. 3511* 180 kg* 75 kg* SRF.. 4001* 225 kg* 65 kg* SRF.. 4011* 225 kg* 82 kg* SRF.. 5501* 300 kg* 80 kg* SRFvh 5511* 300 kg* 98 kg*
A)
Grid shelf Glass
shelf
Maximum total load
Wooden shelf
Net weight
Electrical values
Nominal voltage 220 - 240 V ~ Maximum mains fluctuation +/-10% Overvoltage categories II
Data according to DIN 13277
Model SRFvh
4001 4011 5501 5511
Energy consump‐ tion (kWh/ 24h)
0.460
0.741
0.498
0.794
Tempera‐ ture increase – power failure (min.)
95 65 115 65
Tempera‐ ture homo‐ geneity (°K)
1.7
2.7
1.1
1.6
Tempera‐ ture consis‐ tency (°K)
1.0
1.7
0.9
1.0
8.2 Technical fault
Your appliance is designed and built to ensure it works reli‐ ably and has a long service life. In the unlikely event that a fault occurs during operation, please check whether the fault is due to an operating error. If this is the case, you will be charged for the cost incurred even if this falls within the warranty period.
You can fix the following faults yourself.
42 * Depending on model and options
Page 43
8.2.1 Appliance function
Defect Cause Remedy
The appliance is not working.
Temperature is not cold enough.
→ The appliance is not switched on. → The mains plug is not properly
plugged into the socket.
→ There is something wrong with the
fuse in the socket.
→ Power cut
→ The appliance plug is not properly
inserted in the appliance.
→ The appliance door is not closed
properly.
→ Ventilation is not sufficient. → The ambient temperature is too
high.
→ The appliance was opened too
many times or for too long.
→ The temperature is set incorrectly. → The appliance is too close to a heat
source (oven, radiator, etc).
u
Switch on the appliance.
u
Check the mains plug.
u
Check fuse.
u
Keep the appliance closed.
u
If necessary move the refrigerated/frozen items to another fridge or freezer if the power is off for a prolonged period.
u
Check appliance plug.
u
Close appliance door.
u
Clear ventilation grille and clean it.
u
Ensure the correct ambient conditions:
u
Wait to see if the required temperature corrects itself. If not, contact Customer Service (see 8.3 Customer Service) .
u
Set a colder temperature and check after 24 hours.
u
Change where the appliance or the heat source are located.
Shutting down
8.3 Customer Service
First check whether you can rectify the fault yourself . If you cannot rectify the problem, contact Customer Service.
Please refer to the enclosed “Liebherr-Service” brochure for the address.
Unprofessional repair! Injuries.
u
u
u
8.3.1 Contacting Customer Service
Make sure you have the following appliance data at the ready:
q q q
u
-or-
u
u u
WARNING
Have any repairs and action - not expressly specified ­on the appliance and mains cable carried out by service personnel only. (see 7 Maintenance) A damaged mains cable may only be replaced by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person. In the case of appliances with an IEC connector, the change may be made by the customer.
Appliance name (model and index) Service no. (Service) Serial no. (S no.)
Access the appliance information via the display (see 5.3.17 Info ) .
Refer to the type plate for appliance information. (see 8.4 Type plate)
Note down appliance information. Notify Customer Service: Report errors and the appliance information.
w
This will help us to provide a fast and focussed service.
u
Follow any further instructions provided by Customer Services.
8.4 Type plate
The type plate is inside the appliance. See appliance over‐ view.
Fig. 154
Appliance designation (3) Serial No.
(1) (2) Service No.
9 Shutting down
u
Empty the appliance.
u
Switch off the appliance.
u
Pull out the mains plug.
u
Remove appliance connector if required: remove and at the same time move from left to right.
u
Clean appliance (see 7.3 Cleaning the appliance) .
u
Leave the door open so that no bad odours form.
Note
Damage to the appliance and malfunctions!
u
After shutting down, only store the appliance at the permitted room temperature of between -10 °C and +50 °C.
* Depending on model and options 43
Page 44
Disposal
10 Disposal
10.1 Preparing appliance for disposal
Liebherr uses batteries in some of its appli‐ ances. In the EU, for environmental reasons, legislation obliges the end user to remove these batteries before disposing of old appli‐ ances. If your appliance contains batteries, a corresponding notice is attached.
Lamps If you can remove the lamps yourself without
destroying them, also remove these before disposal.
u
Take the appliance out of operation.
u
Appliances with batteries: remove the batteries. For description, see Maintenance chapter.
u
If possible: remove lamps without destroying them.
10.2 Disposing of the appliance in an environmentally friendly manner
The appliance still contains valuable materials and must be disposed of separately from unsorted municipal waste.
11 Additional information
Further information on warranty conditions can be found in the enclosed service brochure or on the Internet at https://
home.liebherr.com.
Dispose of batteries separately from the old appliance. To do this, you can return the batteries free of charge to retailers as well as recycling centres and collection centres for recyclable materials.
Lamps Dispose of removed lamps
via the respective collection systems.
For Germany: You can dispose of the appli‐
ance free of charge via the class 1 collection containers at the local recycling and recyclable material collection centres. When purchasing a new fridge/freezer, if the sales area > 400 m2, retailers will also take back the old appliance free of charge.
WARNING
Leaking coolant and oil! Fire. The coolant contained in the appliance is eco-friendly, but also flammable. The oil contained in the appliance is flammable. Escaping coolant and oil can ignite if the concentration is high enough and in contact with an external heat source.
u
Do not damage the pipelines of the coolant circuit and the compressor.
u
Transport the appliance without damaging it.
u
Dispose of batteries, lamps and the appliance according to the above specifications.
44 * Depending on model and options
Page 45
3s
2s
0
h
65
h
°C °C
2s
°C °C
Quick Start Guide for everyday use
If there is a fault with the appliance, inform: ________________________________________________________________________________________________________________
Model ID / Inventory number: ________________________________________________________________________________________________________________
Quick Start Guide for everyday use
Information about using this Quick Start Guide:
This Quick Start Guide is not a substitute for the full
-
operating instructions nor is it a substitute for appliance training. This Quick Start Guide provides support for everyday use
-
and handling the appliance. Read the full operating instructions and the safety notes
-
contained therein. This Quick Start Guide is for: SRFvh 40../55..
-
Scanning the QR code will open the full operating
-
instructions:
Intended use
This laboratory refrigerator is suitable for professional storage of products at temperatures between 3 °C and 16 °C.
Foreseeable incorrect use
Do not use the appliance for the following applications:
Storage and refrigeration of:
-
Chemically unstable, flammable or corrosive
•
substances Blood, plasma or other body fluids for the purpose of
•
infusion, application or introduction in the human body
Use in potentially explosive atmospheres
-
Use outdoors or in areas exposed to dampness and
-
splashing water
When stocking, observe the following points:
Position grid shelves according to the height required.
q
Observe maximum load.
q
When the storage temperature has been reached, load
q
the appliance (compliance with cold chain). Keep the ventilation slots of the recirculation fan free in
q
the interior. Produce for cooling must not come into contact with the
q
evaporator on the rear wall. Keep liquids in closed containers.
q
Leave space when storing refrigerated goods to ensure
q
good air circulation.
Status display
Navigation with the touch display
Navigation Description
Swipe right or left
Navigates within the menu.
Press briefly
Activates/deactivates function. Confirms selection. Opens submenu.
Long press (3 seconds)
Activates/deactivates function.
Brief press of Back symbol
Jumps back one level.
Displaying temperature recording
Fig. 156
u
Complete steps (see Fig. 5562) .
Resetting temperature recording
Fig. 155
Actual temperature (3) Defrosting status
(1) (2) Alarm status (4) Door opening status
* Depending on model and options 45
Fig. 157
u
Complete steps (see Fig. 5563) .
Page 46
Quick Start Guide for everyday use
Unlocking appliance
Fig. 158
u
Insert the key. Fig. 158 (1)
u
Turn the key clockwise by 90°. Fig. 158 (2)
w
The appliance is unlocked.
Displaying alarm log
Symbol colour in the display
RED
If you cannot remedy the fault yourself, contact a competent member of staff or your nearest customer service outlet.
Cut out the page
Meaning Remedy
Warning
Appears when there are malfunctions. You can eliminate simple malfunctions yourself.
Consult the operating instructions and perform the troubleshooting steps.
Fig. 159 Example shows an active alarm, an unconfirmed alarm, and a confirmed alarm.
u
Complete steps (see Fig. 5565) .
w
Alarm log shows active, confirmed or unconfirmed alarms (maximum 10 alarms).
w
To delete the alarm log: See operating instructions.
Cleaning appliance
u
Empty the appliance.
u
Pull out the mains plug.
u
Observe the information in the operating instructions.
u
Dry the appliance and equipment thoroughly after cleaning.
u
Connect the appliance.
u
Switch on the appliance.
u
Load the appliance once the storage temperature is reached.
What should I do if there is a fault?
A message appears in the display if there is a fault. Messages have different meanings:
Symbol colour in the display
YELLOW
Meaning Remedy
Reminder
Reminder of general procedures. You can carry out these procedures to eliminate the message.
Consult the operating instructions and perform the troubleshooting steps.
46 * Depending on model and options
Page 47
home.liebherr.com/fridge-manuals
Refrigerator ORIGINAL OPERATOR'S MANUAL
Issue date: 20230201
Part number index: 7080660-00
Liebherr Hausgeräte Lienz GmbH
Dr.-Hans-Liebherr-Strasse 1
A-9900 Lienz
Österreich
Page 48
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use