Page 1
Operating and installation instructions
Upright refrigerator
060217
7086440 - 00
SK(ef) 4260 ... 6
Page 2
Appliance at a glance
Contents
1 Appliance at a glance............................................ 2
1.1 Description of appliance and equipment.................. 2
1.2 Appliance range of use............................................. 2
1.3 Conformity................................................................ 3
1.4 External dimensions of the appliance....................... 3
1.5 Saving energy.......................................................... 3
2 General safety information................................... 3
3 Controls and displays........................................... 4
3.1 Operating and control elements............................... 4
3.2 Temperature display................................................. 4
4 Putting into operation............................................ 5
4.1 Transporting the appliance....................................... 5
4.2 Installing the appliance............................................. 5
4.3 Changing over the door hinges................................. 6
4.4 Insertion into a row of kitchen units........................... 7
4.5 Disposing of packaging............................................ 7
4.6 Connecting the appliance......................................... 8
4.7 Switching on the appliance....................................... 8
5 Control.................................................................... 8
5.1 Brightness of the temperature display...................... 8
5.2 Child proofing........................................................... 8
5.3 Door alarm................................................................ 8
5.4 Example of food arrangement.................................. 8
5.5 Food refrigeration..................................................... 9
5.6 Setting the temperature............................................ 9
5.7 SuperCool................................................................ 9
5.8 Fan........................................................................... 9
5.9 Shelves.................................................................... 9
5.10 Using the sectioned shelf......................................... 10
5.11 Door racks................................................................ 10
5.12 Using the bottle holder.............................................. 10
5.13 Vegetable bins.......................................................... 10
6 Maintenance........................................................... 10
6.1 Cleaning the appliance............................................. 10
6.2 Customer service..................................................... 11
7 Malfunctions........................................................... 11
8 Decommissioning.................................................. 12
8.1 Switching off the appliance....................................... 12
8.2 Taking the appliance out of service........................... 12
9 Disposing of the appliance................................... 12
The manufacturer works constantly on the further development
of all the types and models. Therefore please understand that
we have to reserve the right to make design, equipment and
technical modifications.
To get to know all the benefits of your new appliance, please
read the information contained in these instructions carefully.
The instructions apply to several models. Differences may
occur. Text relating only to specific appliances is marked with
an asterisk (*).
Instructions for action are marked with a , the results of
action are marked with a
.
1 Appliance at a glance
1.1 Description of appliance and equipment
Note
Place food inside the appliance as shown in the diagram.
u
This allows the appliance to save energy during operation.
Shelves, drawers and baskets are arranged for optimum
u
energy efficiency on delivery.
Fig. 1
(1) Operating and control
elements
(2) Internal lighting (10) Defrost water channel
(3) Can rack (11) Coldest zone
(4) Bottle shelf (12) Shelf
(5) Bottle rack (13) Shelf, can be split
(6) Vegetable compartment (14) Fan
(7) Adjusting feet (15) Rear transport handles
(8) Front transport handles,
rear transport castors
(9) Type plate
1.2 Appliance range of use
Intended use
The appliance is only suitable for refrigerating
food in a domestic or domestic-like environment. This includes, for example, using
-
in staff kitchens, bed and breakfast establishments,
-
by guests in country houses, hotels, motels
and other accommodation,
-
for catering and similar services in the wholesale trade.
All other types of use are not permitted.
Foreseeable misuse
The following applications are expressly
forbidden:
-
Storing and refrigerating medicines, blood
plasma, laboratory preparations or similar
substances and products based on the
Medical Device Directive 2007/47/EC
-
Use in areas at risk of explosions
2 * Depending on model and options
Page 3
General safety information
Misusing the appliance may lead to damage to
the goods stored or they may spoil.
Climate classifications
Depending on the climate classification the
appliance is designed to operate in restricted
ambient temperatures. The climate classification applying to your appliance is printed on the
rating plate.
Note
Keep to the specified ambient temperatures
u
in order to guarantee that the appliance works
properly.
Climate classification
SN 10 °C to 32 °C
N 16 °C to 32 °C
ST 16 °C to 38 °C
T 16 °C to 43 °C
for ambient temperatures of
1.3 Conformity
The refrigerant circuit has been tested for leaks. This appliance
complies with the applicable safety stipulations and with directives 2014/35/EU, 2014/30/EU, 2009/125/EG, 2011/65/EU and
2010/30/EU.
1.4 External dimensions of the appliance
Fig. 2
x
For appliances supplied with wall spacers, the measurement
increases by 35 mm (see 4.2) .
1.5 Saving energy
Pay attention to good ventilation. Do not cover ventilation
-
holes or grids.
Always keep the fan air slits clear.
-
Do not install the appliance in direct sunlight, next to an
-
oven, radiator or similar.
Energy consumption is dependent on the installation condi-
-
tions, e.g. ambient temperature (see 1.2) . If the ambient
temperature deviates from the standard temperature of
25°C, the energy consumption may differ.
Open the appliance for as short a time as possible.
-
The lower the temperature is set the higher the energy
-
consumption.
Sort food before arranging (see Appliance at a glance).
-
Store all food well packaged and covered. A build up of frost
-
is avoided.
Only take food out for as long as necessary so that it doesn’t
-
warm up too much.
Inserting hot food: let it cool to room temperature first.
-
Dust deposits increase energy consumption:
For refrigerators with heat exchangers
-
dust the metal grid on the back of the
appliance once a year.
2 General safety information
Danger for the user:
-
This device can be used by children and
people with impaired physical, sensory or
mental abilities or with a lack of experience
and knowledge provided that they are supervised or have received instruction in the safe
use of this device, and about the resulting
hazards. Children must not play with this
appliance. Cleaning and user maintenance
work must not be carried out by children
without adult supervision. Children aged
between 3 and 8 are allowed to load and
unload the appliance. Children below the age
of 3 must be kept away from the appliance
unless they are under continuous adult supervision.
-
When disconnecting the appliance from the
supply, always take hold of the plug. Do not
pull the cable.
-
In the event of a fault pull out the mains plug
or deactivate the fuse.
-
Do not damage the mains power cable. Do
not operate the appliance with a defective
mains power cable.
-
Have any repairs to or intervention in the
appliance, and any change of the mains
power cable, carried out by the customer
service only or by other specialised personnel
trained for the purpose.
-
Only assemble, connect and dispose of the
appliance according to the instructions.
* Depending on model and options 3
Page 4
Controls and displays
-
Please keep these instructions in a safe place
and pass them on to any subsequent owners.
-
Special-purpose lamps (incandescent lamps,
LEDs, fluorescent tubes) in the appliance
serve to illuminate the appliance interior and
are not suited for room illumination.
Fire hazard:
-
The refrigerant R 600a is environmentally
friendly but flammable. Escaping refrigerant
may ignite.
•
Do not damage the refrigerant circuit pipes.
•
Do not allow naked flames or ignition
sources to enter the appliance.
•
Do not use any electrical appliances in the
interior (e.g. steam cleaners, heaters, ice
cream maker etc.).
•
If refrigerant escapes: remove any naked
flames or sources of ignition from the
leakage area. Ventilate the room well.
Notify the after-sales service.
-
Do not store explosives or sprays using
combustible propellants such as butane,
propane, pentane, etc. in the appliance. To
identify these spray cans, look for the list of
contents printed on the can, or a flame
symbol. Gases possibly escaping may ignite
due to electrical components.
-
Keep burning candles, lamps and other items
with naked flames away from the appliance so
that they do not set the appliance on fire.
-
Please be sure to store alcoholic drinks or
other packaging containing alcohol in tightly
closed containers. Any alcohol that leaks out
may be ignited by electrical components.
Danger of tipping and falling:
-
Do not misuse the plinth, drawers, doors etc.
as a step or for support. This applies particularly to children.
Danger of food poisoning:
-
Do not consume food which has been stored
too long.
Danger of frostbite, numbness and pain:
-
Avoid lasting skin contact with cold surfaces
or refrigerated/frozen food or take protective
steps, e.g. wear gloves. Do not consume ice
cream, water ice or ice cubes immediately
and do not consume them too cold.
Danger of injury and damage:
-
Hot steam can lead to injury. Do not use electrical heating or steam cleaning equipment,
open flames or defrosting sprays to defrost.
-
Do not use sharp implements to remove the
ice.
Danger of crushing:
-
Do not hold the hinge when opening and
closing the door. Fingers may get caught.
Symbols on the appliance:
The symbol can be located on the compressor. It
refers to the oil in the compressor and indicates
the following danger: Swallowing or inhaling can
be fatal. This is only relevant for recycling. There
is no danger in normal operation.
Please observe the specific information in
the other sections:
DANGER identifies a situation involving direct
danger which, if not obviated, may
result in death or severe bodily
injury.
WARNING identifies a dangerous situation
which, if not obviated, may result in
death or severe bodily injury.
CAUTION identifies a dangerous situation
which, if not obviated, may result in
minor or medium bodily injury.
NOTICE identifies a dangerous situation
which, if not obviated, may result in
damage to property.
Note identifies useful information and tips.
3 Controls and displays
3.1 Operating and control elements
Fig. 3
(1) Alarm button (7) Up setting button
(2) SuperCool button (8) Fan button
(3) On/Off button (9) Temperature display
(4) Alarm symbol (10) Fan symbol
(5) Menu symbol (11) Child-proofing symbol
(6) Down setting button (12) SuperCool symbol
3.2 Temperature display
During normal operation, the display shows:
the average cooling temperature
-
The following displays indicate a fault. Possible causes and
solutions: (see Malfunction).
-
F0 to F9
4 * Depending on model and options
Page 5
4 Putting into operation
4.1 Transporting the appliance
Risk of injury and danger of damage as a result of incorrect
transport!
u
u
u
4.2 Installing the appliance
CAUTION
Transport the appliance in a packed condition.
Transport the appliance upright.
Do not transport the appliance without assistance.
Putting into operation
The more R 600a refrigerant there is in the appliance, the
q
larger the room in which the appliance is standing needs to
be. In rooms that are too small, a flammable mix of gas and
air may be created if there is a leak. According to the EN 378
standard, every 11 g of R 600a refrigerant requires at least
1 m3 space in the room for the appliance. The amount of
refrigerant in your appliance is on the type plate inside the
appliance.
Detach the connecting cable from the rear of the appliance,
u
removing the cable holder at the same time because otherwise there will be vibratory noise!
NOTICE
Risk of damage from stainless steel care products!
The stainless steel doors and stainless steel side panels
are treated with a premium surface finish.
Stainless steel care products attack these surfaces.
Fire hazard due to dampness!
If live parts or the mains lead become damp this may cause
short circuits.
The appliance is designed for use in enclosed areas. Do not
u
operate the appliance outdoors or in areas where it is
exposed to splash water or damp conditions.
WARNING
WARNING
Risk of fire due to short circuit!
If the mains cable/connector of the appliance or of another
appliance touch the rear of the appliance, the mains cable/
connector may be damaged by the appliance vibrations,
leading to a short circuit.
Stand the appliance so that it is not touched by connectors
u
or main cables.
Do not plug the appliance or any others into sockets located
u
near the rear of the appliance.
WARNING
Fire hazard due to refrigerant!
The refrigerant R 600a is environmentally friendly but flammable. Escaping refrigerant may ignite.
Do not damage the piping of the refrigeration circuit.
u
WARNING
Fire hazard and danger of damage!
Do not place appliances emitting heat e.g. microwaves,
u
toasters etc. on the appliance!
WARNING
Blocked ventilation openings pose a risk of fire and damage!
Always keep the ventilation openings clear. Always ensure
u
that the appliance is properly ventilated!
In the event that the appliance is damaged, contact the
q
supplier immediately before connecting to the mains.
The floor at the site must be flat and level.
q
Do not install the appliance in a location where it is exposed
q
to direct radiation of the sun, next to a cooker, heater and
similar.
Always stand the appliance backed directly to the wall using
q
the enclosed wall spacers (see below).
The appliance may be moved only when it is empty.
q
The surface supporting the appliance must be at the same
q
level as the surrounding floor.
Do not install the appliance without assistance.
q
Only use a soft, clean cloth to wipe down finished door
u
and side panel surfaces and painted door and side
panel surfaces. To remove heavy dirt, use a little water or
neutral detergent. Alternatively, you can use a micro-fibre
cloth.
Remove the protective film from the decorative trims.*
u
Remove all transit supports.
u
The spacers supplied with some appliances must be used to
achieve the stated energy consumption. These will extend the
depth of the appliance by approx. 35 mm. The appliance is fully
functional if the spacers are not used, but does have a slightly
higher energy consumption.
In the case of an appliance with
u
enclosed wall spacers, mount the
wall spacers on the back of the
appliance at the top left and right.
Dispose of packaging material (see 4.5) .
u
Align the appliance so that it
u
stands firmly and on a level by
applying the accompanying
spanner to the adjustableheight feet (A) and using a
spirit level.
Then support the door:
u
Extend the adjustable foot at
the turn hinge (B) until it rests
on the floor and then make a
further 90° turn.
When a Side-by-Side appliance (S…) is fitted together with
a second appliance (as a SBS combination):
Proceed according to the Side-by-Side combined fridge-
u
freezer installation instructions. (Accessories bag of the SBS
freezer/appliance with freezer compartment)
Note
Clean the appliance (see 6.1) .
u
If the appliance is installed in a very damp environment,
condensate may form on the outside of the appliance.
Always see to good ventilation at the installation site.
u
* Depending on model and options 5
Page 6
Putting into operation
4.3 Changing over the door hinges
You can change over the door hinges if necessary.
NOTICE
Risk of damage to side-by-side appliances due to condensation!
When a side-by-side appliance (S…) is fitted together with a
second appliance (as a SBS combination), the door hinges
must remain as delivered.
Do not change over the door hinges.
u
Ensure that the following tools are to hand:
Torx® 25
q
Torx® 15
q
Screwdriver
q
Battery-powered screwdriver, if necessary
q
Second person for fitting work, if needed
q
4.3.1 Detaching the door
Note
Remove any food from the door racks before removing the
u
door, so that no food falls out.
4.3.2 Changing the bearing parts
Lift out the bearing pin
u
Fig. 5 (23)
Lift off the stopper
u
Unscrew
u
Unscrew
u
it to the opposite location hole of the turn hinge and screw it
firmly into place.
Carefully lift off the cover on the handle side
u
transfer it to the opposite side.
Screw the turn hinge
u
hinge side, possibly using a cordless screwdriver (with
4 Nm).
Re-insert the stopper
u
Re-insert the bearing pin
u
washer and adjustable-height foot. In so doing, pay attention
that the locating lug points backwards
and adjustable-height foot
Fig. 5 (26)
Fig. 5 (29)
Fig. 5 (22)
Fig. 5 (21)
the turn hinge
the bearing element
Fig. 5 (25)
Fig. 5 (21)
.
Fig. 5 (25)
firmly into place on the new
into the other hole.
Fig. 5 (22)
together with washer
Fig. 5 (24)
.
.
Fig. 5 (28)
, transfer
Fig. 5 (27)
together with the
Fig. 5
and
Fig. 4
Close the door.
u
Pull off the cover
u
Lift off the cover
u
(10)
forwards and upwards.
(11)
.
CAUTION
Risk of injury if the door tips!
Take good hold of the door.
u
Set down the door carefully.
u
Unscrew the upper turn hinge
u
it off.
Lift off the door and set it aside.
u
(12)
(2x Torx® 25)
(13)
and lift
4.3.3 Transferring the handle
Transfer the spring clamp
u
Fig. 6 (31)
latch nose and pull the
spring clamp off over it.
Slide the spring clamp
u
into place on the new
hinge side until it clicks
into place.
: Depress the
Fig. 6
6 * Depending on model and options
Page 7
Fig. 7
Lift the stopper
u
transfer it.
Dismantle the door handle
u
plates*
(34)
When fitting the pressure plates on the opposite side, make
u
sure they snap properly into place.*
(33)
out of the door bearing bush and
(32)
, stoppers
and transfer to the opposite side.
(33)
and pressure
4.3.4 Fitting the door
Place the door from above onto the lower bearing pin
u
Fig. 5 (22)
Close the door.
u
Insert the upper turn hinge
u
side.
Screw the upper turn hinge
u
4 Nm)(2x Torx® 25)
with a bradawl or use a cordless screwdriver.
Snap the cover
u
site side.
.
(12)
in the door on the new hinge
(12)
firmly into place (with
(13)
. Possibly make preliminary holes
(10)
and cover
(11)
into place at the oppo-
4.3.5 Aligning the door
Align the door to the appliance housing by way of the two
u
oblong holes in the bottom turn hinge
unscrew the middle screw.
WARNING
Risk of injury due to the door dropping out!
If the bearing parts are not screwed into place firmly enough,
the door may drop out. This may lead to severe injuries. What is
more, the door may not close and therefore the appliance may
fail to cool properly.
Screw the turn hinges firmly into place with 4 Nm.
u
Check all of the screws and retighten if necessary.
u
Fig. 5 (25)
. To do so,
Putting into operation
4.4 Insertion into a row of kitchen units
Fig. 8
(1) Top cupboard (3) Kitchen cabinet
(2) Appliance (4) Wall
x
For appliances supplied with wall spacers, the measurement
increases by 35 mm (see 4.2) .
The appliance can be built into kitchen units. A top cupboard
Fig. 8 (2)
the appliance
units.
Ventilation requirements:
-
-
-
If the appliance is installed with the hinges next to a wall
Fig. 8 (4)
least 40 mm. This corresponds to the projection of the handle
when the door is open.
4.5 Disposing of packaging
Danger of suffocation due to packing material and plastic film!
u
can be added above the appliance in order to bring
Fig. 8 (1)
At the back of the stack cabinet there has to be a ventilation
duct of at least 50 mm depth throughout the width of the
stack cabinet.
The cross section of the ventilation gap below the ceiling
must be at least 300 cm2.
the larger the ventilation space, the more energy-saving the
appliance is in operation.
, the distance between appliance and wall has to be at
up to the height of the fitted kitchen
WARNING
Do not allow children to play with packing material.
The packaging is made of recyclable materials:
corrugated board/cardboard
-
expanded polystyrene parts
-
polythene bags and sheets
-
polypropylene straps
-
nailed wooden frame with polyethylene panel*
-
Take the packaging material to an official collecting point.
u
* Depending on model and options 7
Page 8
Control
4.6 Connecting the appliance
NOTICE
Failure to connect properly
Damage to the electronics.
Do not use a standalone inverter.
u
Do not use an energy saving plug.
u
WARNING
Failure to connect properly
Fire.
Do not use an extension cable.
u
Do not use distributor blocks.
u
The type of current (alternating current) and voltage at the
installation site have to conform with the data on the type plate
(see Appliance at a glance).
The socket must be properly earthed and fused. The tripping
current for the fuse must be between 10 A and 16 A.
The socket must be easily accessible so that the appliance can
be quickly disconnected from the supply in an emergency. It
must be outside the area of the rear of the appliance.
Check the electrical connection.
u
Plug in the power plug.
u
4.7 Switching on the appliance
Press On/Off button
u
The temperature display indicates the current temperature.
w
The interior light is on when the door is open.
w
If “DEMO” is displayed, demo mode is activated. Please
w
contact the after sales service.
Fig. 3 (3)
.
5 Control
5.1 Brightness of the temperature display
You can adjust the brightness of the temperature display to the
light conditions of the room in which the appliance is installed.
5.1.1 Adjusting the brightness
The brightness is adjustable between h0 (no illumination) and
h5 (maximum luminosity).
To activate the setting mode: press SuperCool button
u
Fig. 3 (2)
w
The display indicates c.
The menu symbol
w
Using the Up setting button
u
button
To confirm: briefly press the SuperCool button
u
To set the display brighter: press the Up
u
setting button
To set the display darker: press the Down
u
setting button
To confirm: briefly press the SuperCool
u
button
The brightness is adjusted to the new value.
w
To deactivate the setting mode: press the On/Off button
u
Fig. 3 (3)
-or-
Wait for 5 minutes.
u
The temperature is indicated again in the temperature
w
display.
for about 5s.
Fig. 3 (6)
Fig. 3 (7)
Fig. 3 (6)
Fig. 3 (2)
.
Fig. 3 (5)
, select h.
.
.
.
shines.
Fig. 3 (7)
and Down setting
Fig. 3 (2)
.
5.2 Child proofing
The child-proofing function enables you to make
sure that the appliance is not inadvertently switched
off by playing children.
5.2.1 Setting the child lock function
To activate the setting mode: press SuperCool button
u
Fig. 3 (2)
w
The display indicates c.
The menu symbol
w
Briefly press theSuperCool button
u
When c1 is indicated in the display:
to activate the child lock, briefly press the
u
SuperCool button
w
The child lock symbol
display.
When c0 is indicated in the display:
to deactivate the child lock, briefly press the SuperCool
u
button
w
The child lock symbol
display.
To deactivate the set-up mode: press On/Off button
u
Fig. 3 (3)
-or-
Wait for 5 minutes.
u
The temperature is indicated again in the temperature
w
display.
for about 5 s.
Fig. 3 (2)
.
Fig. 3 (5)
Fig. 3 (2)
.
shines.
.
Fig. 3 (11)
Fig. 3 (11)
Fig. 3 (2)
shines. c flashes in the
goes out. c flashes in the
to confirm.
5.3 Door alarm
An audible warning sounds if the door is open for
longer than 60 seconds.
The audible warning stops automatically when the
door is closed.
5.3.1 Muting the door alarm
The audible alarm can be muted when the door is open. The
sound switch-off function is active as long as the door is left
open.
Press alarm button
u
The door alarm is silenced.
w
Fig. 3 (1)
.
5.4 Example of food arrangement
Fig. 9
8 * Depending on model and options
Page 9
5.5 Food refrigeration
SuperCool is deactivated.
w
Control
Note
The energy consumption increases and the cooling performance decreases if the ventilation is inadequate.
Always keep the air slits of the fan free.
u
Store perishable food such as ready-to-serve dishes, meat
u
products and sausages in the coldest zone. Place butter and
preserves in the upper area and in the door (see Appliance
at a glance).
Use recyclable plastic, metal, aluminium and glass
u
containers and cling film for wrapping.
Use the front area of the refrigerator compartment floor only
u
for briefly putting down cooled products, e.g. when rearranging and sorting. However do not leave cooled products
there otherwise they may be pushed back or tipped over
when the door is closed.
Do not store food too close together to enable good air
u
circulation.
To safeguard bottles from tipping over: move the bottle
u
holder.
5.6 Setting the temperature
The temperature depends on the following factors:
the frequency of opening the door
-
the room temperature of the installation location
-
the type, temperature and quantity of the food
-
The temperature can be set from 9 °C to 2 °C, the recommended temperature is 5 °C.
For a higher temperature setting: press Up button
u
For a lower temperature setting: press Down button
u
Fig. 3 (6)
When the button is pressed the first time, the previously set
w
value is indicated, flashing, in the temperature display.
To change the temperature in 1 °C steps: briefly press the
u
button.
To change the temperature continuously: hold down the
u
button.
The value is displayed flashing during the setting operation.
w
The actual temperature is displayed about 5 s after the last
w
press of a button. The temperature slowly adjusts to the new
value.
.
Fig. 3 (7)
5.8 Fan
With the fan you can rapidly cool large quantities of
fresh food or achieve a relatively even distribution of
temperature across all the storage levels.
The forced-air cooling is to be recommended:
at high room temperature (above33 °C )
-
at high humidity
-
The forced-air cooling uses slightly more energy. To save
energy, the fan switches off automatically when the door is
open.
5.8.1 Switching on the fan
Briefly press the fan button
u
The fan symbol
w
The fan is active. In some appliances, the fan is only acti-
w
vated when the compressor is running.
Fig. 3 (10)
Fig. 3 (8)
shines.
.
5.8.2 To switch off the fan
Briefly press the fan button
u
The fan symbol
w
The fan is switched off.
w
Fig. 3 (10)
Fig. 3 (8)
goes out.
.
5.9 Shelves
5.9.1 Moving or removing shelves
.
The shelves have stops preventing them from being unintentionally pulled out.
5.7 SuperCool
With SuperCool you switch to the highest cooling
performance to reach lower cooling temperatures.
Use SuperCool, to rapidly cool large amounts of
food.
When SuperCool is activated, the fan* may run. The appliance
operates with maximum cooling performance, which means
that the noise of the refrigeration unit may be temporarily
louder.
The SuperCool function uses slightly more energy.
5.7.1 Cooling with SuperCool
Briefly press SuperCool button
u
The SuperCool symbol
w
The cooling temperature drops to the coldest value.
w
SuperCool is activated.
SuperCool is automatically deactivated after 6 to12 hours
w
The appliance continues to operate in the energy-saving,
normal mode.
Fig. 3 (2)
Fig. 3 (12)
.
lights up in the display.
5.7.2 To prematurely deactivate SuperCool
Briefly press SuperCool button
u
The SuperCool symbol
w
* Depending on model and options 9
Fig. 3 (2)
Fig. 3 (12)
.
goes out in the display.
Fig. 10
Lift the shelf slightly and pull forward a little.
u
Adjust the height of the shelf. To do so, push the cut-outs
u
along the supports.
In order to remove the shelf fully, place it at a slant and pull
u
out towards the front.
Insert shelf with the raised edge pointing upwards at the
u
back.
The food does not freeze onto the rear wall.
w
5.9.2 Dismantling shelves
The shelves can be disman-
u
tled for cleaning.
Page 10
Maintenance
5.10 Using the sectioned shelf
pull the vegetable bin all the way out and tilt it forwards a
u
little.
In the case of the bottom drawer, the drawer locking device
w
is additionally released and the vegetable bin can be
removed.
Push the projecting telescopic slides back in.
u
Fig. 11
The glass shelf with stop face (2) has to be at the back.
u
5.11 Door racks
5.11.1 Moving the storage rack
Fig. 12
5.11.2 Dismantling door racks
Fig. 13
The door racks can be dismantled for cleaning.
u
5.12 Using the bottle holder
To avoid the bottles tipping
u
over, push the bottle holder
along.
Fig. 15
To insert the vegetable bins:
place the vegetable bin on the telescopic slides and push to
u
the rear, exerting slight pressure.
In the case of the bottom drawer, the drawer locking device
w
additionally engages and the vegetable drawer sits firmly on
the telescopic slides.
6 Maintenance
6.1 Cleaning the appliance
Risk of injury and damage as a result of hot steam!
Hot steam can lead to burns and can damage the surfaces.
u
NOTICE
Incorrect cleaning damages the appliance!
u
u
u
u
u
u
u
u
u
u
u
u
Do not apply stainless steel cleaning agent to glass or plastic
surfaces to prevent them from being scratched. Darker areas at
the beginning and quite an intensive colour of the stainless
steel surface are normal.
WARNING
Do not use any steam cleaners!
Do not use cleaning agents in concentrated form.
Do not use any scouring or abrasive sponges or steel wool.
Do not use any sharp or abrasive cleaning agents, nor any
that contain sand, chloride or acid.
Do not use chemical solvents.
Do not damage or remove the type plate on the inside of the
appliance. It is important for the customer service.
Do not pull off, bend or damage cables or other components.
Do not allow any cleaning water to enter the drain channel,
ventilation grille or electrical parts.
Please use soft cleaning cloths and a universal pH-neutral
cleaning agent.
Please use cleaning and care products suitable for contact
with foodstuffs in the appliance interior.
Empty appliance.
Pull out the power plug.
Clean plastic outer and inner surfaces with lukewarm
water and a little washing-up liquid.
5.13 Vegetable bins
Fig. 14
To remove the vegetable bins:
10 * Depending on model and options
Page 11
Malfunctions
NOTICE
Risk of damage from stainless steel care products!
The stainless steel doors and stainless steel side panels
are treated with a premium surface finish.
Stainless steel care products attack these surfaces.
Only use a soft, clean cloth to wipe down finished door
u
and side panel surfaces and painted door and side
panel surfaces. To remove heavy dirt, use a little water or
neutral detergent. Alternatively, you can use a micro-fibre
cloth.
Clean drain hole: Remove deposits
u
with a narrow instrument, e.g. a
cotton bud.
Most of the parts can be dismantled for cleaning: see the
u
relevant chapter.
Clean items of equipment by hand with lukewarm water
u
and a little washing-up liquid.
Only use a damp cloth to clean the telescopic rails. The
u
grease in the runners is for lubrication purposes and must
not be removed.
After cleaning:
Wipe dry the appliance and items of equipment.
u
Connect the appliance and switch it on again.
u
Put the food back inside.
u
6.2 Customer service
First check whether you can correct the fault yourself by reference to the list (see Malfunction). If this is not the case, please
contact the customer service whose address is given in the
enclosed customer service list.
Risk of injury if repair work is not carried out professionally!
u
u
u
w
u
w
u
WARNING
Have any repairs and action - not expressly specified - on
the appliance and mains cable carried out by service
personnel only. (see Maintenance)
Read the appliance
designation
Fig. 16 (1)
No.
Fig. 16 (2)
serial No.
off the type plate
located inside the
appliance on the lefthand side.
, service
and
Fig. 16 (3)
Fig. 16
Notify the customer service, specifying the fault, appliance
designation
Fig. 16 (3)
This will help us to provide you with a faster and more accurate service.
Keep the appliance closed until the customer service
arrives.
The food will stay cool longer.
Pull out the mains plug (not by pulling the connecting cable)
or switch off the fuse.
Fig. 16 (1)
.
, service No.
Fig. 16 (2)
and serial No.
7 Malfunctions
Your appliance is designed and manufactured for a long life
span and reliable operation. If a malfunction nonetheless
occurs during operation, check whether it is due to a handling
error. In this case you will have to be charged for the costs
incurred, even during the warranty period. You may be able to
rectify the following faults yourself:
Appliance does not work.
The appliance is not switched on.
→
Switch on the appliance.
u
The power plug is not properly inserted in the wall socket.
→
Check power plug.
u
The fuse of the wall socket is not in order.
→
Check fuse.
u
The compressor runs for a long time.
The compressor switches to a low speed when little cold is
→
needed. Although the running time is increased as a result,
energy is saved.
This is normal in energy-saving models.
u
SuperCool is activated.
→
The compressor runs for longer in order to rapidly cool the
u
food. This is normal.
A LED on the bottom rear of the appliance (at the
compressor) flashes regularly every 15 seconds*.
The inverter is equipped with a diagnostic LED.
→
The flashing is normal.
u
Excessive noise.
Due to the various speed steps, speed-regulated* compres-
→
sors can generate different running noises.
The sound is normal.
u
A bubbling and gurgling noise.
This noise comes from the refrigerant flowing in the refriger-
→
ation circuit.
The sound is normal.
u
A quiet clicking noise.
The noise is produced whenever the refrigeration unit
→
(motor) automatically switches on or off.
The sound is normal.
u
A hum. It is briefly a little louder when the refrigeration
unit (the motor) switches on.
The refrigeration increases automatically when the
→
SuperCool function is activated, fresh food has just been
placed in the appliance or the door has been left open for a
while.
The sound is normal.
u
The ambient temperature is too high.
→
Solution: (see 1.2)
u
A low hum.
The sound is produced by air flow noise of the fan.
→
The sound is normal.
u
Vibratory noise.
The appliance is not fixed to the ground. The running of the
→
cooling unit therefore makes objects and adjacent furniture
vibrate.
Adjust appliance via the height-adjustable feet.
u
Move bottles and containers apart.
u
The temperature display indicates: F0 to F9
There is a fault.
→
Please contact the after-sales service (see Maintenance).
u
DEMO shines in the temperature display.
The demo mode is activated.
→
Please contact the after-sales service (see Maintenance).
u
* Depending on model and options 11
Page 12
Decommissioning
The outer surfaces of the appliance are warm*.
The heat of the refrigeration circuit is used to prevent
→
condensate from forming.
This is normal.
u
The temperature is not cold enough.
The door of the appliance is not properly closed.
→
Close the door of the appliance.
u
Insufficient ventilation.
→
Keep ventilation grille clear, and clean it.
u
The ambient temperature is too high.
→
Solution: (see 1.2) .
u
The appliance was opened too frequently or for too long.
→
Wait to see whether the appliance reaches the required
u
temperature by itself. If not, please contact the after sales
service (see Maintenance).
The temperature is incorrectly set.
→
Set the temperature to a colder setting and check after 24
u
hours.
The appliance is too close to a source of heat (stove, heater
→
etc).
Change the position of the appliance or the source of heat.
u
The internal light does not come on.
The appliance is not switched on.
→
Switch on the appliance.
u
The door was open longer than 15 min.
→
The interior light automatically switches off if the door has
u
been open for about 15 min.
The LED illumination is defective or the cover is damaged:
→
8.2 Taking the appliance out of service
Empty the appliance.
u
Switch off the appliance (see Decommissioning).
u
Remove mains connector.
u
Clean the appliance (see 6.1) .
u
Leave the door open to prevent odour.
u
9 Disposing of the appliance
The appliance contains some reusable materials
and should be disposed of properly - not simply
with unsorted household refuse. Appliances which
are no longer needed must be disposed of in a
professional and appropriate way, in accordance
with the current local regulations and laws.
When disposing of the appliance, ensure that the refrigeration
circuit is not damaged to prevent uncontrolled escape of the
refrigerant it contains (data on type plate) and oil.
Disable the appliance.
u
Pull out the plug.
u
Cut through the connecting cable.
u
Risk of injury due to electric shock!
Live parts are located under the cover.
Have the LED interior light changed or repaired only by the
u
customer service or by specialized personnel trained for the
purpose.
WARNING
WARNING
Danger of injury by LED lamp!
The light intensity of the LED illumination corresponds to laser
class 1/1M.
If the cover is defective:
Do not look into the illumination with optical lenses from the
u
immediate proximity. This can cause injury to the eyes.
The door gasket is defective or should be replaced for
other reasons.
In some units, the seal around the door can be replaced.
→
You will not need any special tools to do this.
Please contact the after-sales service (see Maintenance).
u
The unit has iced up or condensation has formed.
The door seal may have also slipped out of its groove.
→
Check to ensure that the door seal is seated properly in the
u
groove.
8 Decommissioning
8.1 Switching off the appliance
Press On/Off button
u
The temperature display is dark.
w
If the appliance cannot be switched off, the child lock func-
w
tion is active (see 5.2) .
12 * Depending on model and options
Fig. 3 (3)
for approx. 2 seconds.
Page 13
Disposing of the appliance
* Depending on model and options 13
Page 14
Liebherr-Hausgeräte Ochsenhausen GmbH
Memminger Straße 77-79
88416 Ochsenhausen
Deutschland
home.liebherr.com
Loading...