Gebrauchsanweisung für Kühl-Gefrier-Kombination, NoFrost
Operating instructions for fridge-freezer combination, NoFrost
Consignes d'utilisation pour combiné réfrigérateur-congélateur, NoFrost
Gebruiksaanwijzing voor koel-vries-combinatie, NoFrost
Istruzione d'uso per combinazione frigo-congelatore, NoFrost
Instrucciones de manejo para combinado frigorífico-congelador, NoFrost
Kullaným Kýlavuzu Soðutucu-Dondurucu-Kombinasyonu, NoFrost
Οδηγίες Χρήσης Ψυγειοκαταψύκτης
GR
7081 942-02
C(es)40
1410
10
1 The appliance at a glance
Operating controls, fig. A1
1 On/Off button, fridge section
2* Ventilation button
3 Adjustment button, fridge section
4 Temperature display, fridge section
5 Temperature display, freezer section
6 Adjustment button, freezer section
7 Superfrost button
8 Alarm button
9 On/Off button, freezer section
W By moving the bottle and can holder, you can prevent bottles
from tipping over when the door is opened and closed. The
holder can be removed for cleaning:
- fig. A2: The holder slides and releases left or right along the
door stops.
W You can remove all door racks for cleaning, fig. A2: lift rack
and pull forwards.
W The shelves* can be adjusted according to height of frozen
food, fig. A4.
- Lift the shelf, slide forwards and remove.
- Always insert shelves with the raised edge at the back pointing upwards, otherwise food may freeze onto the rear wall.
W Removing drawers: Pull forward until the drawer stops
and lift out, fig. A3.
W Fig. A5: If you need space for large bottles and containers,
then simply push the front half of
glass shelf 1 back. For cleaning, the holder 2 can be used to
remove the half glass shelves.
Rating plate specifications fig. A6
1 Appliance designation
2 Service number
3 Appliance number
4 Freezing capacity ... kg/24hrs.
Description of appliance and equipment, fig. A
Refrigerator compartment, approx. 5 0C
Operating controls
Ceiling lighting
Egg tray
Butterstop
Adjustable storage shelves
Adjustable door racks
Defrost drain
Bottle shelf
Adjustable bottle and can holder
Door rack for large bottles
Coldest zone of the refrigerator compartment, for sensitive and
perishable foodstuffs
Vegetable, salad and fruit bins
Rating plate
Note
- Shelves, drawers and
baskets are arranged for
optimum energy efficiency
on delivery.
Freezer compartment, approx. -18 0C
Information system*
VarioSpace*
High drawers
Ice-cube tray*
Adjustable-height feet at front, transport castors at back
* depending on model and options
Congratulations on your purchase. Your appliance offers you all the advantages of modern refrigeration technology, guaranteeing you high quality, a long service life and high reliability.
The features on your appliance have been designed to ensure maximum convenience - day in, day out.
This appliance has been manufactured with recyclable materials using an environmentally friendly
process, so together you and we are making an active contribution to the preservation of our environment.
To familiarise yourself with all the advantages your new appliance has to offer, please read the information contained in these operating instructions carefully.
We wish you much pleasure with your new appliance.
Contents Page
Operating instructions
1 The appliance at a glance ....................................... 10
Contents ...................................................................
Information system ...................................................
Safety regulations ....................................................
Saving energy ..........................................................
2 Safety instructions and warnings ......................... 12
Disposal notes ..........................................................
Technical safety ........................................................
Safety during use .....................................................
Setting up .................................................................
Connecting to the mains ..........................................
3 Putting into operation and controls ...................... 13
Switching the appliance on and off ...........................
Adjusting the temperature .........................................
Temperature display .................................................
Temperature alarm ...................................................
Switching the temperature alarm to mute
4 Refrigerator compartment ...................................... 14
Arrangement of food
Refrigerating with fan* ...............................................
Interior light ...............................................................
5 Freezer compartment ............................................. 15
Making ice-cubes ......................................................
SuperFrost .................................................................
Notes on freezing and storage ..................................
6 Defrosting, cleaning ............................................... 16
7 Troubleshooting ...................................................... 16
Customer service and type plate .............................
8 Instructions for installation and modification
Changing over door hinges .......................................
Insertion into row of kitchen units ..............................
.................................................. 14
..................... 13
11
11
11
11
12
12
12
12
12
13
13
13
13
14
14
15
15
15
16
17
17
Information system*
Use frozen food within the recommended period. The
numbers between the symbols indicate the storage period
in months for different kinds of frozen foods. Storage times
given are guide times for food frozen at home. Whether or
not the lower or upper value is applicable depends on the
food quality and how it was processed prior to freezing. The
lower values always apply to food with a high fat content.
The symbols have the following signification:
1 pre-cooked meals, ice-cream
2 fish, pork
3 vegetables, fruit
4 sausages, bread
5 mushrooms, game
6 poultry, beef/veal
Keep these operating instructions in a safe place and pass
them on to the next owner, where applicable.
The operating instructions apply to several models. Differences may therefore occur.
Safety regulations
W The device is designed exclusively for the cooling
foodstuffs. The applicable statutory regulations are to be
observed in the event that the device is to be used for
commercial cooling of foodstuffs.
The device is not suitable for the storage and cooling of
drugs, blood plasma, laboratory preparations or similar
medicine-related materials and products as detailed in the
Medical Devices Directive 2007/47/EC. Improper use of
the device can cause the stored products stored in it to be
damaged or the items can be spoiled. In addition, the device is not suitable for operation in explosion-prone areas.
W The appliance is set to operate within specific ambient
temperature limits according to its climate rating. These
temperature limits should not be exceeded. The correct
climate rating for your appliance is indicated on the type
plate. This is explained as follows:
Climate rating set for
ambient temperatures of
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C
- The refrigerant circuit has been tested for leaks.
-
The appliance complies with current safety regulations
and EC directives 2006/95/EC and 2004/108/EC.
§
Saving energy
- Always ensure good ventilation. Do not cover ventilation
openings or grille.
- Always keep fan louvres clear.
- Do not place appliance in areas of direct sunlight or next to
a stove, heater or similar object.
- The energy consumption depends on the installation con
ditions, e.g. the ambient temperature.
- Keep the time the appliance is open to a minimum.
- Store food logically.
- Ensure that all food is well packed and covered for storage.
This will prevent frost from forming.
- First cool warm food to room temperature before storing it.
- Defrost frozen food in the refrigerator.
- If there is a thick layer of frost in the appliance: defrost the
appliance.
- Empty and switch off refrigerating
unit for longer vacation periods.
Accumulated dust increases the en-
ergy consumption:
- Once a year, dust the refrigerating
unit together with the metal grille of
the heat exchanger at the back of
the appliance.
* depending on model and options
-
11
12
2 Safety instructions and warnings
Disposal notes
The packaging is made of recyclable materials.
- Corrugated board/board
- EPS moulded parts
- Polythene sheets
- Polypropylene straps
W Keep packaging materials away from children polythene sheets and bags can cause suffocation!
W Please return the packaging to an official collection point.
Your old appliance: This contains some reusable
materials and should be disposed of properly - not
simply with unsorted household refuse.
W Discarded appliances should be disabled:
Remove the plug, cut through the connection
cable and render the catch unusable so that
children cannot become trapped inside.
W Ensure that the refrigerant circuit is not damaged
when the appliance that is no longer needed is
taken away for disposal.
W Details of the refrigerant can be found on the type plate.
W Appliances which are no longer needed must be disposed of
in a professional and appropriate way, in accordance with
the current local regulations and laws.
Technical safety
W To prevent injury or damage to the unit, the app-
liance should only be transported wrapped and
set up by two people.
W The refrigerant R 600a is environmentally friendly but
flammable.
W Do not damage the refrigerant circuit pipes. Splashes of
refrigerant can harm your eyes or ignite.
W If refrigerant escapes, remove all naked flames or sour-
ces of ignition in the vicinity of the leak, disconnect the
appliance from the mains and ventilate the area well.
W In the event that the appliance is damaged, contact the
supplier immediately before connecting to the mains.
W To guarantee safe operation, ensure that the appliance
is set up and connected as described in these operating
instructions.
W In the event of a fault, disconnect the appliance from the
mains: disconnect mains plug (do not pull on the connection cable) or trigger or unscrew fuse.
W Any repairs and work on the appliance should only be
carried out by the customer service department, as unauthorised work could prove highly dangerous for the
user. The same applies to changing the mains power cable.
Safety during use
W Do not store explosives or sprays using combu-
stible propellants such as butane, propane, pentane, etc. in the appliance. Electrical components might
cause leaking gas to ignite. You can identify such sprays
by the printed contents or a flame symbol.
W Only store high-percentage alcohol in tightly sealed,
upright containers.
W Do not allow naked flames or ignition sources to enter the
appliance.
W Do not use electrical appliances inside the appliance (e.g.
steam cleaners, heaters, ice makers, etc.).
W Do not stand on the plinth, drawers or doors or use them
to support anything else.
W This appliance is not intended for use by persons (inclu-
ding children) with reduced physical, sensory or mental
capabilities or lack of experience and knowledge unless
they have been given initial supervision or instruction
concerning use of the appliance by a person responsible
for their safety. Children should be supervised to ensure
that they do not play with the appliance.
Avoid prolonged skin contact with cold surfaces or chil-
W
led/frozen food. This could cause pain, numbness and
frostbite. In the case of prolonged skin contact, protective
measures should be taken, e.g. gloves should be worn.
W Do not consume food which has been stored for too long,
as it could cause food poisoning.
W Special-purpose lamps (incandescent lamps, LEDs,
fluorescent tubes) in the appliance serve to illuminate the
appliance interior and are not suited for room illumination.
Setting up
W When setting up/fitting ensure that the refrigerant circuit
pipes are not damaged.
W Once in position, use a 10 spanner to adjust the
feet so that the appliance is level and does not wobble.
W Standard EN 378 specifies that the room in which
you install your appliance must have a volume of 1 m3 per
8 g of R 600a refrigerant used in the appliance, so as to
avoid the formation of inflammable gas/air mixtures in the
room where the appliance is located in the event of a leak
in the refrigerant circuit. The quantity of refrigerant used
in your appliance is indicated on the type plate on the
inside of the appliance.
W Always position the appliance directly up against
the wall.
W The ventilation grilles should not be obstruc-
ted. Please note the appendix concerning instal-
lation instructions.
W Condensation may form on the outside of the re-
frigerator/freezer during periods of high humidity.
Constant ventilation of the installation site is recommend.
W Do not place heat-emitting appliances, e.g. microwave
oven, toaster, etc., on top of the refrigerator or freezer.
W In order to avoid the risk of fire, do not place any burning
candles, lamps or other objects with open flames on the
refrigerator/freezer.
W Fire hazard due to dampness!
If live parts or the mains lead become damp this may
cause short circuits.
- The appliance is designed for use in enclosed areas. Do
not operate the appliance outdoors or in areas where it is
exposed to splash water or damp conditions.
W CAUTION! Risk of injury and danger of damage as a
result of incorrect transport!
- Transport the appliance in a packed condition.
- Transport the appliance upright.
- Do not transport the appliance without assistance.
W The appliance may be moved only when it is empty.
Connecting to the mains
Power supply (AC) and voltage
at the operating point must comply with the details on
the rating plate, which is located on the inside left of
the appliance, next to the vegetable bins.
W Connect the appliance with a properly earthed fused
plug and socket only.
W The socket must be fused with a 10 A fuse or higher, it
must be away from the rear of the appliance and must be
easily accessible.
W Do not connect the appliance to the supply with other
equipment using a distribution outlet - risk of overheating.
W When removing the mains cable from the back of the appliance,
remove the cable holder as well so as to avoid vibration noise.
The wires in the mains lead are coloured in accordance with
the following code:
green/yellow = earth,
blue = neutral,
brown = live.
Warning! This appliance must be earthed.
Non-rewireable plugs BS 1363
If this machine or appliance is fitted with a non-rewireable plug,
the following information applies: If the socket outlets are not
suitable for the plug supplied with this product, it must be cut
off and an appropriate plug fitted. The plug cut from the flexi-ble
cord should be disposed of and on no account be inserted into
a 13 A socket elsewhere in the house (electric shock hazard).
The fuse cover must be re-fitted when changing the fuse, and if
the fuse cover is lost the plug must not be used until a suitable
replacement is obtained. The colour of the correct replacement
cover is that of the coloured insert in the base of the plug, or
the colour that is embossed in words on the base of the plug
(as applicable to the design of the plug fitted).
The correct rating of the replacement fuses that are ASTA approved to BS 1362 should be fitted. Replacement fuse covers
may be purchased from your local electrical suppliers, electricity showroom or approved service agent.
3 Putting into operation and controls
Note: Pressing the Up/Down button once activates the
nominal value adjustment.
By pressing the adjustment button for a long time, a colder
setting is adjusted within a small temperature range (e.g.:
between ``5`` and ``7``), but it is not visible on the display.
W
Freezer section:
Recommended temperature setting: -18 °C.
The temperature can be changed progressively. When
the setting -32 °C is reached, it begins again at -15 °C.
- Press the freezer section adjustment button
LED of the desired temperature lights up.
Note: Pressing the Up/Down button once activates the
nominal value adjustment.
By pressing the adjustment button for a long time, a colder
setting is adjusted within a small temperature range (e.g.:
You are advised to clean the appliance before switching it on
for the first time (see "Cleaning").
Put the appliance into operation approximately 4 hours before loading with frozen food for the first time. Only insert
frozen food when the freezer compartment is cold.
Switching the appliance on and off Fig.
A1
Switching on: To switch on the entire appliance, you only
need to switch on the freezer section. The fridge section is
automatically switched on, too.
W Switching on the freezer section:
- Briefly press the On/Off button
The temperature displays light up. The appliance is
switched on.
W Switching on the fridge section:
When the fridge section is switched on, the freezer section
is switched on, too.
- Briefly press the On/Off button
The temperature displays light up. The fridge and freezer
sections are switched on.
9.
1.
Switching off
- To switch off the entire appliance you only need to switch
off the freezer section. The fridge section is automatically
switched off, too.
W Switching off the freezer section:
- Press the On/Off button
The temperature displays are dark. The appliance is
switched off.
W Switching off the fridge section:
- Press the On/Off button
The interior lighting is dark. The temperature display of
the fridge section is dark.
If only the fridge section is to be switched off, e.g. during
holiday periods, always make sure that: the temperature
display on the freezer sections remains lit.
9 for approx. 2s.
1.
Adjusting the temperature Fig. A1
W Fridge section:
The temperature depends on the following factors:
- The frequency of opening the door
- The room temperature of the installation location
- The type, temperature and quantity of the frozen food
Recommended temperature setting: 5 °C.
The temperature can be changed progressively. When
the setting 1 °C is reached, it begins again at 9 °C.
- Press the adjustment button 3until the LED of the
desired temperature lights up.
between ``-15°C`` and ``-18°C``), but it is not visible on the
display.
Temperature display
The following are displayed in normal mode:
- The set freezer temperature
- The set fridge temperature.
The display flashes:
- The temperature setting is being changed
- The temperature has risen by several degrees.
Temperature alarm
For the freezer section
When the freezer temperature is no longer cold enough, the
acoustic warning signal sounds.
At the same time, button 8flashes.
The following may be the cause of the temperature being
too high:
- Fresh hot food has been put in
- Too much warm air has got in while you were sorting out
the freezer or removing items.
- There ahs been a longer power failure
- The appliance is faulty.
The acoustic warning signal is automatically shut off when
the temperature is cold enough again.
If the alarm condition remains, proceed according to the
chapter dealing with faults.
Note: If the temperature is not cold enough, food may go off.
- Check the quality of the food. Do not consume food that
has gone off.
Switching the temperature alarm to mute
The acoustic warning signal can be switched to mute. When
the temperature is cold enough again, the alarm function
returns to active condition.
- Press button
- The acoustic warning signal shuts off.
- The alarm button
temperature is cold enough again.
6until the
8.
8stops flashing. It goes out when the
* depending on model and options
13
14
4 Refrigerator compartment
Arrangement of food
Due to the natural air circulation in the refrigerator compartment, different temperature ranges result, which are
beneficial for the storage of different foods. Just above the
vegetable bins and at the back of the refrigerator, the air is
colder, ideal for raw meat or cold meats; at the top front of
the compartment and in the door, the air is warmer, making
it ideal for cheese and for spreadable butter.
Notes on refrigerating
- Store food so that the air can circulate freely; do not place
items too close together. Do not cover the ventilator air
slots* on the rear wall - improtant for refrigerating capacity!
- Always store food which gives off or is sensitive to ethylene gases such as fruit, vegetables and salads separately or wrapped in order not to affect their storage life;
e.g. do not store tomatoes together with kiwis or cabbage.
Refrigerating with fan*
You can quickly cool down large quantities of fresh food or
achieve a relatively even temperature distribution over all
storage surfaces using the fan.
Due to the enforced air circulation, the various
temperature ranges of normal operation are raised.
Changing the interior lighting
Light-bulb specifications:
max. 25 W
Socket: E 14
The current and voltage types should agree with the
information on the type plate
W Switch off the appliance. Remove the mains plug, or
trigger or remove the fuse.
W Hold the lamp cover at the front according to the illustration,
and detach at the rear.
W Replace the bulb.
W Re-install the cover.
The following are recommended when cooling by circulating air:
- With high room temperature (above approx. 30 °C),
- With high humidity, e.g. on summer days.
Cooling by circulating air uses slightly more energy. To save
energy, the fan automatically switches off when the door is
opened.
Switching on the fan:
- press the fan button
- the button lights up
- the fan is switched on.
Switching off the fan
- press the fan button
- the fan button goes out
- the fan is switched off.
2 (Fig. A1)
2 (Fig. A1)
* depending on model and options
5 Freezer compartment
Making ice-cubes
W Fill the ice-cube tray* three-
quarters full with water and
freeze. The ice-cubes can be removed from the tray by twisting
or by holding upside down for a
short time under running water.
SuperFrost
The fresh foods should be frozen to the core as quickly as
possible and frozen foods already stored be given a "cold
reserve". This is enabled by the SuperFrost
system. This is the best way of maintaining the nutritional
value, appearance and flavour of frozen foods.
W The maximum amount of fresh food which can be frozen
in 24 hours is shown on the rating plate ("Freezing capacity ... kg/24h"), fig. A6, pos. 4. The maximum quantity of
frozen food varies according to model and climatic class.
Freezing with SuperFrost
Fig. A1/7
You do not have to switch SuperFrost on:
- when inserting already frozen foods,
- when freezing up to approx. 2 kg of fresh food daily.
W Press SuperFrost button 7 briefly, so that the LED lights
up.
- The freezing temperature decreases, the appliance works
with the greatest possible freezing capacity.
W With a smaller amount of food to be frozen, wait/pre-
freeze for approx 6 hours - normally sufficient, with the
maximum quantity, see freezing capacity on rating plate,
approx. 24 hours.
W Then insert the fresh food.
- The SuperFrost function can be quit manually by briefly
pressing button 7, if not:
- SuperFrost switches off
65 hours.
- the SuperFrost button is dark
- the temperature range set for normal mode lights up in
the temperature display.
- the appliance continues in normal energy-saving mode.
W In order to reach the maximum freezer performance,
warm food must be placed directly on the shelves, not in
the drawers, or stored in direct contact to the inner side
walls.
automatically after approximately
Notes on freezing and storage
W As a guideline for the storage time, the following applies to
various foodstuffs in the freezer compartment:
Ice cream 2 to 6 months
Sausage, ham 2 to 6 months
Bread, cakes and pastries 2 to 6 months
Game, pork 6 to 10 months
Fish, oily 2 to 6 months
Fish, lean 6 to 12 months
Cheese 2 to 6 months
Poultry, beef 6 to 12 months
Vegetables, fruit 6 to 12 months
W Always provide packaging with date and contents and do
not exceed the recommended storage time of the frozen
food, in order to prevent reductions in quality.
W Always package food which you freeze yourself in suit-
able portions for your household. So that the food freezes
quickly through to the core, the following quantities per
package should not be exceeded:
- Fruit and vegetables up to 1 kg,
- meat up to 2.5 kg.
W After wasing and portioning, blanch vegetables (immerse
in boiling water for 2-3 minutes, then remove and cool
in cold water). If blanching with a steamer or microwave,
observe the relevant instructions).
W Do not salt or season food and blanched vegetables
before freezing. Only lightly salt and season other foods.
The intensity of flavour of certain seasonings changes.
W Do not freeze bottles and tins containing carbonated
beverages, as otherwise they may burst.
W For storage: The individual storage tray can support
max. 25 kg of frozen goods.
W VarioSpace: By removing the 2nd and 3rd draw and the
storage tray, you obtain the storage space for bulky goods
equivalent to two drawer heights. Poultry, meat, large
game pieces and tall baked goods can be frozen whole
and further prepared in one piece.
W If you wish to use the max. holding ca-
pacity, you can remove the drawers and
store the frozen goods directly
on the storage trays .
- Removing drawers, fig. G1:
pull out to stop position and lift up at
front.
- Removing storage tray, fig. G2:
remove 2nd and 3rd drawer, lift storage
tray up at front and pull out.
To insert: simply push storage tray in,
snap into position at front.
W For defrosting, always only remove as much as will be
needed immediately. Defrosted food should be used to
prepare a meal as soon as possible.
You can defrost frozen food:
- in the oven/fan-assisted oven
- in the microwave
- at room temperature
- in the refrigerator compartment; the specified tempera
ture of the frozen food is used for refrigerating the food.
- Defrosted flat meat and fish portions can be heated up.
- Vegetables can be prepared in a frozen state (at half
cooking time as fresh vegetables).
-
Cold-storage accumulators*
The cold-storage accumulators provided prevent the temperature in the freezer from rising too quickly
in the event of a power failure, thus
preserving the quality of the food.
To ensure maximum storage time
in the event of a power failure,
place the cold-storage accumulators in the top-most freezer drawer on
top of the food.
W Suitable packing materials are conventional freezer
bags, reusable plastic, metal and aluminium containers.
W Do not allow fresh food to be frozen to come into contact
with food already frozen. Always insert packaging in a dry
condition to avoid packaging freezing together.
* depending on model and options
15
16
7 Troubleshooting6 Defrosting, cleaning
Defrosting
The refrigerator compartment
defrosts automatically. The defrost water is evaporated by the heat from the compressor; drops of water
on the rear wall are perfectly normal.
W Ensure that the defrost water can flow freely through the
drain hole in the rear wall (arrow in fig. A).
The freezer compartment
W To defrost, switch off the appliance:
- Disconnect the appliance from the mains or
- set the temperature control to "0".
W If possible, put the frozen goods in the freezer drawer,
wrap in newspaper or a blanket and store in a cool place.
W To speed up the defrosting process place a saucepan of
hot but not boiling water on one of the middle shelves.
Do not use electric heaters or steam clean-ers, defrost-
ing sprays or naked flames for defrosting nor any metal
objects for removing the ice. Risk of injury and damage!
W Leave the appliance door open when defrosting.
After defrosting, mop up the remaining water with a
sponge or cloth and clean the appliance.
Cleaning
W Before cleaning, always switch off the appli-
ance. Disconnect from the mains or un-screw
or switch off the fuse.
W Clean the outer walls, inside and equipment by
hand with lukewarm water and a little detergent. Because
of the risk of injury and damage to the appliance, steam
cleaning equipment should not be used.
W
Do not use abrasive sponges or scourers, do not use
concentrated cleaning agents and never use cleaning
agents containing sand, chloride or acid or chemical solvents, as
these would damage the surfaces and could cause corrosion.
W We recommend using a soft cloth and an all-purpose
cleaner with a neutral pH value. Only use food safe cleaning materials inside the appliance.
W
For stainless-steel appliances:
-
First clean the side panels with a conventional stainless steel
cleaner. Subsequently, apply the enclosed stainless steel
care product evenly onto the surfaces in the same direction in
with they have been ground or polished.
-
Only clean the door surfaces with a clean and soft cloth. If nec-
essary, moisten the cloth (water + detergent). Alternatively,
use a micro-fibre cloth.
W Ensure that no cleaning water penetrates into the electri-
cal components, drain gulley* or ventilation grilles.
Wipe the appliance dry.
W Do not damage or remove the type plate on the inside of
the appliance. It is very important for servicing purposes.
W Clean the drain hole on the rear
wall above the vegetable bins
frequently, fig. A, arrow.
If necessary, clean with a thin
object, e.g. a cotton swab or
similar.
W Ensure that none of the wires or other components are
dislodged, bent or damaged.
W Then connect/switch on the appliance.
If the appliance is to be left switched off for any length of
time, empty the appliance, disconnect from the mains, clean as
described above and leave the door open so as to avoid odours.
Your appliance is designed and manufactured in such a way
as to provide fault.free operation and a long service life.
Nevertheless, if a fault should occur during operation, please check whether the fault is due to incorrect operation. In
this case we have to charge you for any costs incurred also
within the warranty period.
You can eliminate the following faults yourself by checking
the possible causes:
Fault possible cause and remedy
Appliance not working, display is unlit
- Is the appliance switched on properly?
- Is the mains plug properly inserted in the socket?
- Is the socket fuse intact?
The interior light does not come on
- Is the refrigerator compartment switched on?
- Was the door open for longer than 15 min.?
- The bulb is defective. Change the bulb as described in
"Interior light".
Loud running noise
- Is the appliance standing firmly on the floor, or does the
compressor cause nearby items of furniture or objects to
vibrate?
If necessary, move the appliance slightly, align by adju
sting the adjustable feet, or move bottles and containers
apart.
- The following are normal:
Flow noises, bubbling or dripping, coming from the
coolant in the refrigerating circuit.
A soft c
ration unit (the motor) switches on or off automatically.
Motor noise; this will be slightly louder for a brief period
when the refrigeration unit switches on. When SuperFrost
is switched on, fresh food is inserted, or when the door is
open for a long time, the refrigerating capacity increases
automatically. A deep humming sound occurs due to air
flow noises of the fan.
Alarm sounds, red visual warning LED flashes,
temperature is not low enough
- Were too large quantities of fresh food inserted
SuperFrost? (see section "SuperFrost")
- Does the door close properly?
- Is the appliance sufficiently well ventilated?
Clear ventilation grilles if necessary.
- Is the ambient temperature too hot? (See "Safety regula
tions")
- Has the appliance been opened too often or left open too
long?
- If applicable, wait until the appliance reaches the required
temperature itself.
Customer service and type plate
If none of the above causes applies and you cannot
eliminate the fault yourself or if more than one LED
is flashing, please contact
your nearest after-sales service point (see list attached).
Please state the
appliance designation 1,
service number 2,
appliance number 3
of the rating plate (see fig.),
and which LED displays are
flashing so as to ensure rapid,
accurate servicing. The rating
plate is located inside the appliance on the left-hand side.
Keep the appliance closed until the after-sales service technician arrives in order to prevent further loss of refrigeration.
-
licking sound, this always occurs when the refrige-
without
-
* depending on model and options
8 Instructions for installation and modification
Before reading, please fold out and
refer to the illustrated back page.
The external dimensions of the appliance can be seen on
fig. S.
Do not install the appliance side-by-side with another refrigerator or freezer. This is important to prevent condensation
and consequential damage from it.
Changing over the door hinges
You can change over the door hinges if necessary.
Ensure that the following tools are to hand:
- Torx® 25
- Torx® 15
- Screwdriver
- Cordless screwdriver, if necessary
- Second person for fitting work, if needed
- Accompanying Allen key size 2
Detaching the upper door
- Close the upper door.
- Pull off the cover Fig. 1 (1) forwards and upwards.
- Lift off the cover Fig. 1 (2).
CAUTION
Risk of injury if the door tips!
- Take good hold of the door.
- Set down the door carefully.
screw the upper turn hinge Fig. 1 (3) (2x Torx® 25)
- Un
Fig. 1 (4) and lift it off.
- Lift up the upper door and set it aside.
Detaching the lower door
- Close the lower door.
- Draw the middle bearing pin Fig. 2 (11) out of the turn
hinge and lower door.
- Remove the plastic cap Fig. 2 (10).
CAUTION
Risk of injury if the door tips!
- Take good hold of the door.
- Set down the door carefully.
- Open
- Unscrew the middle turn hinge (2x Torx® 25). Fig. 2 (13)
- Lift up the door and set it aside.
Transferring the middle bearing elements
- Carefully detach the cover panel Fig. 2 (12).
- Turn the middle turn hinge Fig. 2 (13) with the washer Fig.
- Turn the cover panel Fig. 2 (12) through 180° and snap it
Transferring the lower
bearing elements
For appliances without
height adjustment
- Lift out the bearing pin
- Lift off the stopper Fig. 3 (21).
- Unscrew Fig. 3 (26) the turn hinge Fig. 3 (25).
- Unscrew Fig. 3 (29) the bearing element Fig. 3 (28), trans-
- Carefully lift off the cover on the handle side Fig. 3 (27)
- Screw the turn hinge Fig. 3 (25) firmly into place on the
- Re-insert the stopper Fig. 3 (21) into the other hole.
- Re-insert the bearing pin Fig. 3 (22) together with washer
the lower door.
2 (14) through 180° and screw it firmly into place on the
new hinge side (with 4 Nm).
into place again on the new handle side.
Fig. 3 (22) together with
washer
Fig. 3 (24).
fer it to the opposite location hole of the turn hinge and
screw it firmly into place.
and transfer it to the opposite side.
new hinge side, possibly using a cordless screwdriver
(with 4 Nm).
and foot. In so doing, pay attention that the locating lug
points backwards
Fig. 3 (23) and foot
Transferring the handles
On both the upper and lower door:
- Transfer the spring clamp Fig. 5 (31): Depress the latch
nose and pull the spring clamp off over it.
- Slide the spring clamp into place on the new hinge side
until it clicks into place.
- Lift the stopper Fig. 6 (30) out of the door bearing bush
and transfer it.
- Detach door handle Fig. 6 (32), stopper Fig. 6 (33) and
pressure plates Fig. 6 (34) and transfer to the opposite
side.
- When fitting the pressure plates on the opposite side,
make sure they snap properly into place*.
Fitting the lower door
- Place the lower door from above onto the lower bearing
pin.
- Close the door.
- Place the plastic cap Fig. 2 (10) back onto the middle turn
hinge Fig. 2 (13).
- Place the middle bearing pin Fig. 2 (11) in the lower door,
on the new hinge side, through the middle turn hinge Fig.
2 (13).
Fitting the upper door
- Place the upper door on the middle bearing pin Fig. 2 (11).
- Insert the upper turn hinge Fig. 1 (3) in the door on the
new hinge side.
- Screw the upper turn hinge firmly into place (with 4 Nm)
(2x Torx® 25) Fig. 1 (4). Possibly make preliminary holes
with a bradawl or use a cordless screwdriver.
- Apply the cover Fig. 1 (1) and cover Fig. 1 (2) to the opposite side from the outside and snap them into place.
Aligning the doors
- If necessary, align the doors to the appliance housing by
way of the two oblong holes in the bottom turn hinge and
middle turn hinge Fig. 2 (13). To do so, unscrew the middle screw in the bottom turn hinge.
WARNING
Risk of injury due to the door dropping out!
If the bearing parts are not screwed into place firmly enough,
the door may drop out. This may lead to severe injuries.
What is more, the door may not close and therefore the appliance may fail to cool properly.
- Screw the turn hinges firmly into place with 4 Nm.
- Check all of the screws and retighten if necessary.
Insertion into row of kitchen units
1 top unit 2 refrigerator/freezer
3 Kitchen cupboard 4 wall
Fig. U: The appliances can be installed in a row of kitchen
units. To adapt the height of the appliance to the surrounding
furniture a top unit 1 can be added.
When retrofitting with standard kitchen cabinets (max. depth
580 mm), the appliance can be set up directly next to the
kitchen cupboard Fig. U 3. The appliance door protrudes
34 mm at the side and 50 mm in the middle of the appliance
against the front panel of the kitchen cupboard. It can
therefore be opened and closed without any problems.
Important for ventilation:
-
On the rear side of the top unit there must be a ventilation duct
of at least 50 mm depth along the entire width of the top unit.
- The area of ventilation underneath the ceiling must be at
least 300 cm².
- The larger the ventilation cross section, the more energy
the appliance will be able to save.
If the appliance is installed with the hinge side against a wall
Fig. U 4, the distance between the appliance and the wall
must be at least 36 mm. This corresponds with the handle
protrusion when the door is open.
All types and models are subject to continuous improvement
and the manufacturer therefore reserves the right to make
modifications in the shape, equipment and technology.
17
1817/2011
600
1176
614
631
661
606
10
[mm]
637
S
580
min.
50
Ca.36
min.
300 cm
2
[mm]
4
3
2
1
U
630
600
Loading...