Liebherr CBPESF 4013, CBP 4013, CBP 3613, CBPESF 3613, CBP 4033 User Manual

...

Download

Page 1

Operating and installation instructions

Combined fridge-freezer with BioFresh compartment

270313

7085650 - 00

CBP/ CBPesf ... 3

Page 2

Appliance at a glance

Contents

1 Appliance at a glance............................................ 2

1.1 Description of appliance and equipment.................. 2

1.2 Range of appliance use............................................ 2

1.3 Conformity................................................................ 3

1.4 External dimensions of the appliance....................... 3

1.5 Saving energy.......................................................... 3

2 General safety information................................... 3

3 Controls and displays........................................... 4

3.1 Operating and control elements............................... 4

3.2 Temperature display................................................. 5

4 Putting into operation............................................ 5

4.1 Transporting the appliance....................................... 5

4.2 Installing the appliance............................................. 5

4.3 Changing over the door hinges................................ 6

4.4 Insertion into a row of kitchen units........................... 7

4.5 Disposing of packaging............................................ 8

4.6 Connecting the appliance......................................... 8

4.7 Switching on the appliance....................................... 8

5 Control.................................................................... 8

5.1 Temperature alarm................................................... 8

5.2 Refrigerator compartment........................................ 8

5.3 BioFresh compartment............................................. 9

5.4 Freezer compartment............................................... 11

6 Maintenance........................................................... 12

6.1 Manual defrosting..................................................... 12

6.2 Cleaning the appliance............................................. 13

6.3 Customer service..................................................... 13

7 Malfunction............................................................. 13

8 Decommissioning.................................................. 14

8.1 Switching off the appliance....................................... 14

8.2 Taking the appliance out of service.......................... 14

9 Disposing of the appliance................................... 14

The manufacturer works constantly on the further development of all the types and models. Therefore please understand that we have to reserve the right to make design, equipment and technical modifications.

To get to know all the benefits of your new appliance, please read the information contained in these instructions carefully.

The instructions apply to several models. Differences may occur. Text relating only to specific appliances is marked with an asterisk (*).

Instructions for action are marked with a , the results of action are marked with a .

1 Appliance at a glance

1.1 Description of appliance and equipment

Note

Place food inside the appliance as shown in the diagram.

This allows the appliance to save energy during operation. Shelves, drawers and baskets are arranged for optimum

energy efficiency on delivery.

Fig. 1

(1) Operating and control

elements

(2) Interior light (10) BioFresh compartment,

(3) Fan (11) Type plate (4) Glass shelf, relocatable (12) Freezer drawer (5) Rack for tinned food,

relocatable

(6) Sectioned glass shelf,

relocatable

(7) Bottle holder (15) Information system* (8) Bottle rack, relocatable (16) Height-adjustable feet,

(9) BioFresh compartment,

DrySafe

HydroSafe

(13) Cold storage accumula-

tors*

(14) VarioSpace

transport grips at front, transport castors at back

1.2 Range of appliance use

The appliance is suitable solely for cooling food in a domestic environment or similar. This includes use in, for example

in staff kitchenettes, bed and breakfast establishments,

by guests in country homes, hotels, motels and other forms of accommodation,

Page 3

in catering and similar services in the wholesale trade

Use the appliance solely as is customary within a domestic environment. All other types of use are inadmissible. The appliance is not suitable for storing and cooling medicines, blood plasma, laboratory preparations or similar substances and products covered by the 2007/47/EC Medical Devices Directive. Misuse of the appliance can result in the stored products suffering harm or perishing. Furthermore, the appliance is not suitable for operation in potentially explosive atmospheres.

The appliance is set to operate within specific ambient temperature limits according to its climate rating. The correct climate rating for your appliance is indicated on the type plate.

General safety information

1.4 External dimensions of the appliance

Note

Compliance with the ambient temperatures

indicated is required, otherwise the cooling performance is reduced.

Climate rating

SN 10 °C to 32 °C

N 16 °C to 32 °C

ST 16 °C to 38 °C

T 16 °C to 43 °C

for ambient temperatures of

1.3 Conformity

The refrigerant circuit is tested for leakage. The appliance complies with the relevant safety regulations and EC Directives 2006/95/EC, 2004/108/EC, 2009/125/EC and 2010/30/EU.

The BioFresh compartment satisfies the requirements of a chill compartment to EN ISO 15502.

Note for test institutions:

Tests are to be carried out according to the applicable standards and guidelines. Preparation and testing of the appliances must be carried out taking the manufacturer's loading plans and the notes in the operating manual into account.

Fig. 2

Model H (mm)

CBP(esf) 36.. 1817

CBP(esf) 40.. 2011

For appliances supplied with wall spacers, the measurement

increases by 35 mm (see 4.2) .

1.5 Saving energy

Always ensure good ventilation. Do not cover ventilation

openings or grille. Do not place appliance in areas of direct sunlight or next to a

stove, heater or similar object. The energy consumption depends on the installation condi-

tions, e.g. the ambient temperature (see 1.2) . Keep the time the appliance is open to a minimum.

The lower the temperature setting, the higher the power

consumption. Store food logically. (see Appliance at a glance).

Ensure that all food is well packed and covered for storage.

This will prevent frost from forming. Remove food as needed in order that it does not warm too

much. First cool warm food to room temperature before storing it .

Defrost frozen food in the refrigerator.

If there is a thick layer of frost in the appliance: defrost the

appliance. Accumulated dust increases the energy consumption:

Once a year, dust the refrigerating unit

together with the metal grille of the heat

exchanger at the back of the appliance.

2 General safety information

Danger for the user:

This appliance can be used by children of 8

years old and over, and also by persons with

restricted physical, sensory or mental

capacity or lack of experience and knowl-

edge, if they are supervised or have been

Page 4

Controls and displays

instructed on safe use of the appliance and understand the resulting risks. Children must not be allowed to play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.

When disconnecting the appliance from the supply, always take hold of the plug. Do not pull the cable.

In the event of a fault pull out the mains plug or deactivate the fuse.

Do not damage the mains power cable. Do not operate the appliance with a defective mains power cable.

Have any repairs to or intervention in the appliance, and any change of the mains power cable, carried out by the customer service only or by other specialised personnel trained for the purpose.

Only assemble, connect and dispose of the appliance according to the instructions.

Please keep these instructions in a safe place and pass them on to any subsequent owners.

Special-purpose lamps (incandescent lamps, LEDs, fluorescent tubes) in the appliance serve to illuminate the appliance interior and are not suited for room illumination.

Fire hazard:

The refrigerant R 600a is environmentally friendly but flammable. Escaping refrigerant may ignite.

•

Do not damage the refrigerant circuit pipes.

•

Do not allow naked flames or ignition sources to enter the appliance.

•

Do not use any electrical appliances in the interior (e.g. steam cleaners, heaters, ice cream maker etc.).

•

If refrigerant escapes: remove any naked flames or sources of ignition from the leakage area. Ventilate the room well. Notify the after-sales service.

Do not store explosives or sprays using combustible propellants such as butane, propane, pentane, etc. in the appliance. To identify these spray cans, look for the list of contents printed on the can, or a flame symbol. Gases possibly escaping may ignite due to electrical components.

Keep burning candles, lamps and other items with naked flames away from the appliance so that they do not set the appliance on fire.

Please be sure to store alcoholic drinks or other packaging containing alcohol in tightly closed containers. Any alcohol that leaks out may be ignited by electrical components.

Danger of tipping and falling:

Do not misuse the plinth, drawers, doors etc. as a step or for support. This applies particularly to children.

Danger of food poisoning:

Do not consume food which has been stored too long.

Danger of frostbite, numbness and pain:

Avoid lasting skin contact with cold surfaces or refrigerated/frozen food or take protective steps, e.g. wear gloves. Do not consume ice cream, water ice or ice cubes immediately and do not consume them too cold.

Danger of injury and damage:

Hot steam can lead to injury. Do not use electrical heating or steam cleaning equipment, open flames or defrosting sprays to defrost.

Do not use sharp implements to remove the ice.

Please observe the specific information in the other sections:

DANGER identifies a situation involving direct

danger which, if not obviated, may result in death or severe bodily injury.

WARNING identifies a dangerous situation

which, if not obviated, may result in death or severe bodily injury.

CAUTION identifies a dangerous situation

which, if not obviated, may result in minor or medium bodily injury.

NOTICE identifies a dangerous situation

which, if not obviated, may result in damage to property.

Note identifies useful information and tips.

3 Controls and displays

3.1 Operating and control elements

Fig. 3

(1) On/Off button, refriger-

ator compartment

(2) Setting button, refriger-

ator compartment

(3) Refrigerator compart-

ment temperature display

(4) Freezer compartment

temperature display

(5) Setting button, freezer

compartment

(6) SuperFrost button

(7) Alarm button

(8) On/Off button, freezer

compartment

Page 5

Putting into operation

3.2 Temperature display

The following are displayed in normal operation:

the set freezing temperature

the set cooling temperature

The freezer compartment temperature display flashes:

the temperature setting is being changed

after switch-on the temperature is not yet cold enough

the temperature has risen several degrees

4 Putting into operation

4.1 Transporting the appliance

Risk of injury and danger of damage as a result of incorrect transport!

u u u

4.2 Installing the appliance

Fire hazard due to dampness! If live parts or the mains lead become damp this may cause short circuits.

Risk of fire due to short circuit! If the mains cable/connector of the appliance or of another appliance touch the rear of the appliance, the mains cable/ connector may be damaged by the appliance vibrations, leading to a short circuit.

Fire hazard due to refrigerant! The refrigerant R 600a is environmentally friendly but flammable. Escaping refrigerant may ignite.

CAUTION

Transport the appliance in a packed condition. Transport the appliance upright. Do not transport the appliance without assistance.

WARNING

The appliance is designed for use in enclosed areas. Do not operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions.

WARNING

Stand the appliance so that it is not touched by connectors or main cables. Do not plug the appliance or any others into sockets located near the rear of the appliance.

WARNING

Do not damage the piping of the refrigeration circuit.

NOTICE

Risk of damage due to condensate!

Do not install the appliance directly alongside a further

refrigerator/freezer.

In the event that the appliance is damaged, contact the

supplier immediately before connecting to the mains.

The floor at the site must be flat and level.

Do not install the appliance in a location where it is exposed

to direct radiation of the sun, next to a cooker, heater and

similar.

Always stand the appliance backed directly to the wall using

the enclosed wall spacers (see below).

The appliance may be moved only when it is empty.

Do not install the appliance without assistance.

Standard EN 378 specifies that the room in which you install

your appliance must have a volume of 1 m2 per 8 g of R

600a refrigerant used in the appliance. If the room in which

the appliance is installed is too small, a flammable gas-air

mixture may form in the event of a leakage in the refrigera-

tion circuit. The quantity of refrigerant used in your appliance

is indicated on the type plate on the inside of the appliance.

Detach the connecting cable from the rear of the appliance,

removing the cable holder at the same time because other-

wise there will be vibratory noise!

Remove the protective film from the outside of the appli-

ance.*

NOTICE

The stainless steel doors are provided with a high-quality surface coating and must not be treated using the accompanying care product.

Otherwise the surface coating will be affected.

Wipe the coated door surfaces using a soft, clean cloth

only.

Apply a stainless steel cleaner only to the stainless steel

side walls evenly, wiping with the grain. Subsequent

cleaning becomes easier as a result.

Wipe side walls with a paint finish using a soft, clean

cloth only.

Remove the protective film from the decorative trims and

drawer fronts.*

Remove all transit supports.

The spacers supplied with some appliances must be used to achieve the stated energy consumption. These will extend the depth of the appliance by approx. 35 mm. The appliance is fully functional if the spacers are not used, but does have a slightly higher energy consumption.

In the case of an appliance with

enclosed wall spacers, mount the

wall spacers on the back of the

appliance at the top left and right.

Fire hazard and danger of damage!

Blocked ventilation openings pose a risk of fire and damage!

WARNING

Do not place appliances emitting heat e.g. microwaves, toasters etc. on the appliance!

WARNING

Always keep the ventilation openings clear. Always ensure that the appliance is properly ventilated!

Dispose of packaging material (see 4.5) .

Page 6

Putting into operation

Align the appliance so that it

stands firmly and on a level by applying the accompanying spanner to the adjustableheight feet (A) and using a spirit level. Then support the door: Extend

the adjustable foot at the turn hinge (B) until it rests on the floor and then make a further 90° turn.

Note

Clean the appliance (see 6.2) .

If the appliance is installed in a very damp environment, condensate may form on the outside of the appliance.

Always see to good ventilation at the installation site.

4.3 Changing over the door hinges

You can change over the door hinges if necessary.

Ensure that the following tools are to hand:

Torx® 25

Torx® 15

Screwdriver

Cordless screwdriver, if necessary

Second person for fitting work, if needed

4.3.2 Detaching the lower door

Close the lower door.

Draw the middle bearing pin

and lower door. Remove the plastic cap

Risk of injury if the door tips!

u u

u u u

CAUTION

Take good hold of the door. Set down the door carefully.

Open the lower door. Unscrew the middle turn hinge (2x Torx® 25). Lift up the door and set it aside.

Fig. 5 (11)

Fig. 5 (10)

out of the turn hinge

Fig. 5 (13)

4.3.3 Transferring the middle bearing elements

4.3.1 Detaching the upper door

Note

Remove any food from the door racks before removing the

door, so that no food falls out.

Fig. 4

Close the upper door.

Pull off the cover

Lift off the cover

CAUTION

Risk of injury if the door tips!

Take good hold of the door.

Set down the door carefully.

Unscrew the upper turn hinge

Fig. 4 (4)

Lift up the upper door and set it aside.

and lift it off.

Fig. 4 (1)

Fig. 4 (2)

forwards and upwards.

Fig. 4 (3)

(2x Torx® 25)

Fig. 5

Carefully detach the cover panel

Turn the middle turn hinge

Fig. 5 (14)

new hinge side (with 4 Nm). Turn the cover panel

into place again on the new handle side.

through 180° and screw it firmly into place on the

Fig. 5 (12)

Fig. 5 (13)

through 180° and snap it

with the washer

4.3.4 Transferring the lower bearing elements

Fig. 6

Lift out the bearing pin

Fig. 6 (23)

Lift off the stopper

Unscrew

it to the opposite location hole of the turn hinge and screw it firmly into place.

and foot

Fig. 6 (26) Fig. 6 (29)

Fig. 6 (22)

Fig. 6 (24)

Fig. 6 (21)

the turn hinge

the bearing element

Fig. 6 (25)

together with washer

Fig. 6 (28)

, transfer

Page 7

Putting into operation

Carefully lift off the cover on the handle side

transfer it to the opposite side. Screw the turn hinge

hinge side, possibly using a cordless screwdriver (with 4 Nm).

Re-insert the stopper

Re-insert the bearing pin

and foot. In so doing, pay attention that the locating lug points backwards

Fig. 6 (25)

Fig. 6 (21)

Fig. 6 (22)

firmly into place on the new

into the other hole.

Fig. 6 (27)

together with washer

4.3.5 Transferring the handles

On both the upper and lower door:

Transfer the spring clamp

Fig. 7 (31)

latch nose and pull the spring clamp off over it. Slide the spring clamp

into place on the new hinge side until it clicks into place.

: Depress the

and

Fig. 7

4.3.8 Aligning the doors

If necessary, align the doors to the appliance housing by

way of the two oblong holes in the bottom turn hinge

Fig. 6 (25)

unscrew the middle screw in the bottom turn hinge

Fig. 6 (25)

Risk of injury due to the door dropping out! If the bearing parts are not screwed into place firmly enough, the door may drop out. This may lead to severe injuries. What is more, the door may not close and therefore the appliance may fail to cool properly.

Screw the turn hinges firmly into place with 4 Nm.

Check all of the screws and retighten if necessary.

and middle turn hinge

WARNING

Fig. 5 (13)

. To do so,

4.4 Insertion into a row of kitchen units

Fig. 8

Lift the stopper

transfer it. Detach door handle

sure plates When fitting the pressure plates on the opposite side, make

sure they snap properly into place*

Fig. 8 (30)

Fig. 8 (32)

Fig. 8 (34)

out of the door bearing bush and

, stopper

and transfer to the opposite side.

Fig. 8 (33)

and pres-

4.3.6 Fitting the lower door

Place the lower door from above onto the lower bearing pin

Fig. 6 (22)

Close the door.

Place the plastic cap

hinge Place the middle bearing pin

the new hinge side, through the middle turn hinge

Fig. 5 (13)

Fig. 5 (10)

Fig. 5 (11)

back onto the middle turn

in the lower door, on

4.3.7 Fitting the upper door

Place the upper door on the middle bearing pin

Insert the upper turn hinge

hinge side. Screw the upper turn hinge firmly into place (with 4 Nm)

(2x Torx® 25) with a bradawl or use a cordless screwdriver. Apply the cover

site side from the outside and snap them into place.

Fig. 4 (4)

Fig. 4 (1)

Fig. 4 (3)

. Possibly make preliminary holes

and cover

in the door on the new

Fig. 4 (2)

Fig. 5 (11)

to the oppo-

(1) Stack cabinet (3) Kitchen cabinet (2) Appliance (4) Wall

For appliances supplied with wall spacers, the measurement

increases by 35 mm (see 4.2) . The appliance can be inserted into a row of kitchen units. To

match the appliance a suitable stack cabinet ance.

When installing with kitchen units (max. depth 580 mm), the appliance can be positioned directly next to the kitchen cabinet

Fig. 9 (3)

50 mmx in the centre of the appliance in relation to the kitchen cabinet front.

Important for the ventilation:

. The appliance will project by 34 mmx at the sides and

At the back of the stack cabinet there has to be a ventilation

duct of at least 50 mm depth throughout the width of the

stack cabinet.

Fig. 9 (2)

Fig. 9 (1)

to the height of the row of units,

can be fitted above the appli-

Fig. 9

Page 8

Control

The ventilation space under the ceiling has to be at least

300 cm2. the larger the ventilation space, the more energy-saving the

appliance is in operation.

If the appliance is installed with the hinges next to a wall

Fig. 9 (4)

least 40 mm. This corresponds to the projection of the handle when the door is open.

4.5 Disposing of packaging

, the distance between appliance and wall has to be at

4.7.2 Switching on the refrigerator compartment

Note

When the refrigerator compartment is switched on, the

freezer compartment is automatically switched on as well.

Press On/Off button, refrigerator compartment

The interior light is on when the door is open.

The temperature display shines. Refrigerator compartment

and freezer compartment are switched on.

Fig. 3 (1)

Danger of suffocation due to packing material and plastic film!

The packaging is made of recyclable materials:

WARNING

Do not allow children to play with packing material.

corrugated board/cardboard expanded polystyrene parts polythene bags and sheets polypropylene straps nailed wooden frame with polyethylene panel* Take the packaging material to an official collecting point.

4.6 Connecting the appliance

NOTICE

Risk of damage to the electronic control system!

Do not use stand-alone inverters (conversion of d.c. to a.c./

three-phase) or energy saving plugs.

Fire and overheating hazard!

The type of current (alternating current) and voltage at the installation site have to conform with the data on the type plate (see Appliance at a glance).

The socket must be properly earthed and fused. The tripping current for the fuse must be between 10 A and 16 A.

The socket must be easily accessible so that the appliance can be quickly disconnected from the supply in an emergency. It must be outside the area of the rear of the appliance.

u u

WARNING

Do not use extension cables or multiple socket outlets.

Check the electrical connection. Plug in the power plug.

5 Control

5.1 Temperature alarm

The audible alarm sounds if the freezer temperature is not cold enough.

The alarm button flashes at the same time.

The cause of the temperature being too high may be:

warm fresh food was placed inside

too much warm ambient air flowed in when rearranging and

removing food power failure for some time

the appliance is faulty

The audible alarm is automatically silenced, the alarm button

Fig. 3 (7)

when the temperature is sufficiently cold again. If the alarm status persists: (see Malfunction).

Note

Food may be spoilt if the temperature is not cold enough.

5.1.1 Muting the temperature alarm

The audible alarm can be muted. When the temperature is sufficiently cold again, the alarm function is active again.

u w

5.2 Refrigerator compartment

The natural circulation of air in the refrigerator compartment results in zones differing in temperature. It is coldest directly above the plate separating off the BioFresh zone and at the rear wall. It is warmest at the top front of the compartment and in the door.

goes out and the temperature display stops flashing

Check the quality of the food. Do not consume spoiled food.

Press alarm button The audible alarm is silenced.

Fig. 3 (7)

4.7 Switching on the appliance

Note

To switch on the entire appliance it is necessary only to

switch on the freezer compartment. In so doing, the refrigerator compartment is automatically switched on as well.

Put the appliance into operation about 2 hours before first loading food to be frozen.

4.7.1 Switching on the freezer compartment

PressOn/Off button, freezer compartment

The appliance is switched on. The refrigerator compartment

temperature display indicates the set temperature. The freezer compartment temperature display and the alarm button flash until the temperature is sufficiently low. If all LEDs in the display light up, demo mode is activated.

Please contact the after sales service.

Fig. 3 (8)

5.2.1 Food refrigeration

Note

The energy consumption increases and the cooling performance decreases if the ventilation is inadequate.

Always keep the air slits of the fan free.

Place butter and preserves in the upper area and in the door

(see Appliance at a glance). Use recyclable plastic, metal, aluminium and glass

containers and cling film for wrapping. Use the front area of the refrigerator compartment floor only

for briefly putting down cooled products, e.g. when rearranging and sorting. However do not leave cooled products there otherwise they may be pushed back or tipped over when the door is closed. Do not store food too close together to enable good air

circulation. To safeguard bottles from tipping over: move the bottle

holder.

Page 9

Control

At the base of the refrigerator compartment, the integrated bottle shelf or alternatively the glass shelf can be used:

To use the bottle shelf: store

the glass shelf compactly under the bottle shelf. Place the bottles with the

base pointing backwards facing the rear wall. If the bottles project beyond the bottle shelf: set the lower door rack one

position higher.

5.2.2 Setting the temperature

The temperature depends on the following factors:

the door opening frequency

the room temperature at the site where the appliance is

installed the type, temperature and quantity of frozen food

Temperature setting to be recommended: 5 °C The temperature can be changed continuously. Once the 3 °C

setting is reached, it starts again with 9 °C.

To access temperature adjustment: press the setting button,

refrigerator compartment The LED of the current temperature flashes in the tempera-

ture display. Press the setting button, refrigerator compartment

the number of times needed until the required temperature shines in the LED display.

Note

Long pressing of the setting button sets a slightly colder

value within a small temperature range (e.g.: between 5 °C and 6 °C). The LED of the next lower temperature range then shines in the temperature display.

Fig. 3 (2)

once.

Fig. 3 (2)

The glass plate (1) with pull-out stops must be at the front so

that the stops (3) face downwards.

5.2.5 Door racks

Moving the storage rack

Remove storage rack according to

illustration.

Dismantling door racks

The door racks can be dismantled for cleaning.

5.2.6 Removing the bottle holder

Remove the bottle holder according

to the illustration.

5.2.3 Shelves

Relocating the shelves

The shelves have stops preventing them from being unintentionally pulled out.

Lift the shelf and draw it out

forwards. Re-insert shelves at the

required height. The stops must face downwards and lie behind the front shelves.

Dismantling shelves

The shelves can be disman-

tled for cleaning.

5.2.4 Using the sectioned shelf

5.3 BioFresh compartment

The BioFresh compartment allows some types of fresh food to be stored up to three times longer than in conventional refrigerators, without compromising quality.

For food with an indicated best before date, the date specified on the packaging always applies.

5.3.1 HydroSafe

The HydroSafe at the moist setting is suited for storing unwrapped salad, vegetables and fruit with high inherent moisture. When the drawer is well filled, a dewy climate with up to 90% humidity is established. The humidity in the compartment depends on the moisture content of the food stored and on the opening frequency. You can set the humidity yourself.

5.3.2 DrySafe

The DrySafe is suitable for storing dry or wrapped food (e.g. dairy products, meat, fish, sausages). A relatively dry storage climate is established here.

5.3.3 Storing food

Note

Vegetables sensitive to cold, such as cucumbers, auber-

gines, semi-ripe tomatoes, zucchinis and all tropical fruits

sensitive to cold, do not belong in the BioFresh compart-

ment.

Fig. 10

Page 10

Control

To prevent food spoilage due to transfer of germs: Store

unwrapped animal and vegetable products separate from one another in the drawers. This also applies to different sorts of meat. If food has to be stored together due to lack of space: wrap the food.

5.3.4 Storage times

Standard values for storage time at low humidity

Butter up to 90 days

Hard cheese up to 110 days

Milk up to 12 days

Sausage, cold meat up to 9 days

Poultry up to 6 days

Pork up to 7 days

Beef up to 7 days

Game up to 7 days

Standard values for storage time at high humidity

Strawberries up to 7 days

Figs up to 7 days

Blueberries up to 9 days

Raspberries up to 3 days

Currants up to 7 days

Sweet cherries up to 14 days

Kiwis up to 80 days

Peaches up to 13 days

Plums up to 20 days

Cranberries up to 60 days

Rhubarb up to 13 days

Gooseberries up to 13 days

Grapes up to 29 days

Note

Please note that protein-rich food deteriorates faster, i.e.

shellfish and crustaceans deteriorate faster than fish, fish faster than meat.

Standard values for storage time at high humidity

Vegetables, salad

Artichokes up to 14 days

Celery up to 28 days

Cauliflower up to 21 days

Broccoli up to 13 days

Chicory up to 27 days

Lamb's lettuce up to 19 days

Peas up to 14 days

Kale up to 14 days

Carrots up to 80 days

Garlic up to 160 days

Kohlrabi up to 55 days

Lettuce up to 13 days

Herbs up to 13 days

Leek up to 29 days

Mushrooms up to 7 days

Radishes up to 10 days

Brussels sprouts up to 20 days

Asparagus up to 18 days

Spinach up to 13 days

Savoy cabbage up to 20 days

Fruit

Apricots up to 13 days

Apples up to 80 days

Pears up to 55 days

Blackberries up to 3 days

Dates up to 180 days

5.3.5 Adjusting the temperature in the BioFresh compartment

The temperature is regulated automatically. At a temperature of 5 °C in the refrigerator compartment, the temperature in the BioFresh compartment is between 0 °C and 3 °C.

You can adjust the temperature slightly colder or warmer. The temperature is adjustable from 1 (coldest temperature) to 9

(warmest temperature). The preset value is 5. At 1 to 4, the temperature can drop below 0 °C and therefore the food may

freeze a little. The temperature can be changed continuously. Once the value

9 is reached, the selection starts from the beginning again. A combination of LEDs that corresponds to the value shines in the temperature display.

To activate the setting mode: Press the SuperFrost button

Fig. 3 (6)

The SuperFrost button

the set value shines in the temperature display. Press the setting button, freezer compartment

number of times needed until the LED pattern of the value wanted shines. To confirm: Press the SuperFrost button

The temperature is indicated again in the temperature

display. To deactivate the setting mode: press On/Off button, freezer

compartment

-or-

Wait for 5 minutes.

for at least 5 seconds.

Fig. 3 (6)

Fig. 3 (8)

flashes. The LED pattern of

Fig. 11

Fig. 3 (5)

Fig. 3 (6)

the

Page 11

Control

5.3.6 Setting the humidity in the HydroSafe

Low humidity: move the regulator to

the left.

High humidity: move the regu-

lator to the right.

5.3.7 Drawers

Fig. 12

Pull out the drawer, lift it at the back and draw it forwards for

removal. Push the rails in again!

Fig. 13

Pull out the rails.

Attach the drawer to the rails and push it in until it engages

audibly at the back.

5.3.8 Humidity control plate

Fig. 14

To remove the humidity control plate: Having removed the

drawers, carefully draw the plate forwards and lower it for removal. To insert the humidity control plate: Insert the cover mould-

ings of the plate into the rear holder neath and engage them in the holder

Fig. 14 (1)

Fig. 14 (2)

from under-

at the front.

5.4 Freezer compartment

You can store frozen food, make ice cubes and freeze fresh food in the freezer compartment.

5.4.1 Freezing food

The rating plate indicates the maximum quantity of fresh food you can freeze within 24 hours (see Appliance at a glance) under "Freezing capacity ... kg/24h".

The maximum load of frozen food for the drawers is 25 kg each and for the shelves 35 kg each.

CAUTION

Risk of injury due to broken glass! Bottles and cans containing drinks may burst when being frozen. This applies particularly to sparkling drinks.

Do not freeze bottles and cans containing drinks!

In order that the food is rapidly frozen through to the core, do not exceed the following quantities per pack:

- Fruit, vegetables up to 1 kg

- Meat up to 2.5 kg

Pack the food in portions in freezer bags, reusable plastic,

metal or aluminium containers.

5.4.2 Thawing food

- in the refrigerator compartment

- at room temperature

- in a microwave oven

- in a conventional or fan oven

Food once thawed should be re-frozen only in exceptional

cases.

5.4.3 Setting the temperature

Temperature setting to be recommended: -18 °C The temperature can be changed continuously. Once the

-32 °C setting is reached, it starts again with -15 °C.

To access temperature adjustment: press setting button,

freezer compartment

The LED of the current temperature flashes in the tempera-

ture display of the freezer compartment.

Press the setting button, freezer compartment

number of times needed until the required temperature

shines in the LED display.

Note

Long pressing of the setting button sets a slightly colder

value within a small temperature range (e.g.: between

-15 °C and -18 °C). The LED of the next lower temperature

range then shines in the temperature display.

Fig. 3 (5)

once.

Fig. 3 (5)

the

5.4.4 SuperFrost

With this function you can freeze fresh food quickly through to the core. The appliance operates with maximum refrigeration. The noise of the refrigeration unit may be temporarily louder as a result.

In addition, frozen food already in storage is given a "cold reserve". The food stays frozen longer as a result when you defrost the appliance.

The maximum amount of fresh food which can be frozen in 24 h is indicated on the type plate under "freezing capacity ... kg/ 24h". This amount varies according to the model and climate rating.

You have to activate SuperFrost in good time, depending on how much fresh food is to be frozen: about 6 hours before placing the food inside in case of small amounts and about 24 hours in advance in case of the maximum amount of food to be frozen.

Wrap produce and spread it out as far as possible. Do not allow produce to be frozen to touch produce that is already frozen to prevent the latter thawing.

You do not have to activate SuperFrost in the following cases:

when placing frozen food in the freezer

when freezing up to approx. 2 kg fresh food daily

Freezing with SuperFrost

Briefly press the SuperFrost button

The SuperFrost button shines.

The freezer temperature drops, the appliance operates with

the maximum refrigerating capacity.

In case of a small amount of food to be frozen:

wait approx. 6 h.

Place wrapped produce in the bottom drawers.

In case of the maximum amount of food to be frozen (see

type plate):

wait about 24 h.

Remove bottom drawer and place produce directly in the

appliance so that it touches the base or sides.

SuperFrost is automatically deactivated after about 65 h.

Fig. 3 (6)

Page 12

Maintenance

The SuperFrost button extinguishes once freezing is

completed. Place produce in the drawer and then push the drawer back

in again. The appliance continues to operate in the energy-saving,

normal mode.

5.4.5 Drawers

To store frozen food directly on the shelves: pull the drawer

forwards and lift it out.

5.4.6 Shelves

To remove the shelf: lift up at the front

and pull out. To put the shelf back: simply push in as

far as it will go.

5.4.7 VarioSpace

Apart from being able to remove the drawers, you can also remove the shelves, creating space for large items of frozen food. Poultry, meat, large pieces of game and high bakery products can be frozen in one piece and prepared.

The maximum load of frozen food

for the drawers is 25 kg each and for the shelves 35 kg each.

5.4.8 Information system*

With the top drawer removed: to insert cold storage accu-

mulators: slide cold storage accumulator into the top back of the freezer compartment ceiling and snap into place at the front.

With the top drawer removed: to remove cold storage

accumulators: take hold of the cold storage accumulator at the side and press it down for removal.

6 Maintenance

6.1 Manual defrosting

The refrigerator compartment is defrosted automatically. The defrost water evaporates as a result of the heat of the compressor. Drops of water on the rear wall are perfectly normal.

Regularly clean the drain opening to allow the water to flow

away (see 6.2) .

A layer of frost or ice can build up in the freezer compartment after a long period of operation.

The layer of frost or ice builds up faster if the appliance is opened often or if the food is warm when placed inside. However, a thick layer of ice will increase the appliance‘s energy consumption. You should therefore defrost the appliance regularly.

CAUTION

Risk of injury and damage as a result of hot steam!

Do not use electric heaters or steam cleaners, naked flames

or defrosting sprays for defrosting. Do not remove ice using sharp instruments.

Fig. 15

(1) Ready-made meals, ice

cream

(2) Pork, fish (5) Game, mushrooms (3) Fruit, vegetables (6) Poultry, beef/veal

The figures indicate the storage time in months for several types of frozen food in each case. Storage times given are guide times.

(4) Sausages, bread

5.4.9 Cold storage accumulators*

The cold storage accumulators prevent the temperature from rising too fast in the event of power failure.

Using cold storage accumulators*

Freeze and store the cold storage accumu-

lators in the ceiling of the freezer compartment.

Switch on SuperFrost one day before defrosting.

The frozen goods are provided with a "cold reserve".

Switch off the appliance.

The temperature display goes out.

Pull out the power plug or switch off the fuse.

Place cold storage accumulators on top of the frozen food.

If possible, put the frozen goods in the freezer drawer,

wrapped in newspaper or a blanket, and store in a cool place. Place a pan with hot, not boiling

water on a middle shelf.

Defrosting is speeded up.

Leave the door of the appliance open while defrosting.

Remove detached pieces of ice.

If necessary, pick up defrost water several times, using a

sponge or cloth. Clean the appliance (see 6.2) and rub dry.

Page 13

6.2 Cleaning the appliance

Risk of injury and damage as a result of hot steam! Hot steam may damage the surfaces and cause burns.

NOTICE

Incorrect cleaning damages the appliance!

u u u

u u

CAUTION

Do not use any steam cleaners!

Do not use cleaning agents in concentrated form. Do not use any scouring or abrasive sponges or steel wool. Please do not use any aggressive, scouring, sand-, chloride-, chemical- or acid-based cleaning agents. Do not use chemical solvents. Do not damage or remove the type plate on the inside of the appliance. It is important for the customer service. Do not pull off, bend or damage cables or other components. Do not allow any cleaning water to enter the drain channel, ventilation grille or electrical parts. Please use soft cleaning cloths and a universal pH-neutral cleaning agent. Please use cleaning and care products suitable for contact with foodstuffs in the appliance interior.

Malfunction

Put the food back inside.

6.3 Customer service

First check whether you can correct the fault yourself by reference to the list (see Malfunction). If this is not the case, please contact the customer service whose address is given in the enclosed customer service list.

Risk of injury if repair work is not carried out professionally!

WARNING

Have any repairs and action - not expressly specified - on

the appliance and mains cable carried out by service

personnel only. (see Maintenance)

Read the appliance

designation

Fig. 16 (1)

No.

Fig. 16 (2)

serial No.

off the type plate

located inside the

appliance on the left-

hand side.

, service

and

Fig. 16 (3)

Empty appliance.

Pull out the power plug.

Clean plastic outer and inner surfaces with lukewarm

water and a little washing-up liquid.

Do not apply stainless steel cleaning agent to glass or plastic surfaces to prevent them from being scratched. Darker areas at the beginning and quite an intensive colour of the stainless steel surface are normal.*

NOTICE

The stainless steel doors are provided with a high-quality surface coating and must not be treated using the accompanying care product.

Otherwise the surface coating will be affected.

Wipe the coated door surfaces using a soft, clean cloth

only. In case of stubborn dirt, use a little water or a neutral cleaning agent. A microfibre cloth can be optionally used. If the stainless steel side walls are dirty, clean them using

a commercially available stainless steel cleaning agent. Then evenly apply the accompanying stainless steel care product, making strokes in the direction of the grain. Wipe side walls with a paint finish using a soft, clean

cloth only. In case of stubborn dirt, use a little water or a neutral cleaning agent. A microfibre cloth can be optionally used.

Clean drain hole: Remove deposits

with a narrow instrument, e.g. a cotton bud.

Most of the parts can be dismantled for cleaning: see the

relevant chapter. Clean items of equipment by hand with lukewarm water

and a little washing-up liquid.

After cleaning:

Wipe dry the appliance and items of equipment.

Connect the appliance and switch it on again.

Switch on SuperFrost (see 5.4.4) .

When the temperature is sufficiently cold:

Fig. 16

Notify the customer service, specifying the fault, appliance

designation

Fig. 16 (3)

This will help us to provide you with a faster and more accu-

rate service.

Keep the appliance closed until the customer service

arrives.

The food will stay cool longer.

Pull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

Fig. 16 (1)

, service No.

Fig. 16 (2)

and serial No.

7 Malfunction

Your appliance is designed and manufactured for a long life span and reliable operation. If a malfunction nonetheless occurs during operation, check whether it is due to a handling error. In this case you will have to be charged for the costs incurred, even during the warranty period. You may be able to rectify the following faults yourself:

Appliance does not work.

The appliance is not switched on.

→

Switch on the appliance.

The power plug is not properly inserted in the wall socket.

→

Check power plug.

The fuse of the wall socket is not in order.

→

Check fuse.

The compressor runs for a long time.

The compressor switches to a low speed when little cold is

→

needed. Although the running time is increased as a result, energy is saved. This is normal in energy-saving models.

SuperFrost is activated.

→

The compressor runs for longer in order to rapidly cool the

food. This is normal.

A LED on the bottom rear of the appliance (at the compressor) flashes regularly every 15 seconds*.

The inverter is equipped with a diagnostic LED.

→

The flashing is normal.

Excessive noise.

Speed-controlled* compressors may produce varying

→

running noise due to different speed steps.

Page 14

Decommissioning

The sound is normal.

A bubbling and gurgling noise.

This noise comes from the refrigerant flowing in the refriger-

→

ation circuit. The sound is normal.

A quiet clicking noise.

The noise is produced whenever the refrigeration unit

→

(motor) automatically switches on or off. The sound is normal.

A hum. It is briefly a little louder when the refrigeration unit (the motor) switches on.

The refrigeration increases automatically when the Super-

→

Frost, function is activated, fresh food has just been placed in the appliance or the door has been left open for a while. The sound is normal.

The ambient temperature is too high.

→

Solution: (see 1.2)

A low hum.

The sound is produced by air flow noise of the fan.

→

The sound is normal.

Vibratory noise.

The appliance is not fixed to the ground. The running of the

→

cooling unit therefore makes objects and adjacent furniture vibrate.

Adjust appliance via the height-adjustable feet.

Move bottles and containers apart.

The SuperFrost button flashes together with the temperature display.

There is a fault.

→

Contact the customer service. (see Maintenance).

All LEDs are illuminated in the refrigerator compartment temperature display.

Demo mode is activated.

→

Please contact the after sales service. (see Maintenance).

The outside surfaces of the appliance are warm.

The heat of the refrigeration circuit is used to prevent

→

condensate from forming. This is normal.

The temperature is not cold enough.

The door of the appliance is not properly closed.

→

Close the door of the appliance.

Insufficient ventilation.

→

Clear ventilation grilles.

The ambient temperature is too high.

→

Solution: (see 1.2) .

The appliance was opened too frequently or for too long.

→

Wait until the appliance reaches the required temperature

itself. If not, contact the customer service. (see Maintenance). Too much fresh food was placed inside without SuperFrost.

→

Solution: (see 5.4.4)

The appliance is too close to a source of heat (stove, heater

→

etc). Change the position of the appliance or the source of heat.

The interior light is not on.

The appliance is not switched on.

→

Switch on the appliance.

The door was open longer than 15 min.

→

The interior light automatically switches off if the door has

been open for about 15 min. The LED illumination is defective or the cover is damaged:

→

WARNING

Risk of injury due to electric shock! Live parts are located under the cover.

Have the LED interior light changed or repaired only by the

customer service or by specialized personnel trained for the purpose.

Danger of injury by LED lamp! The light intensity of the LED illumination corresponds to laser class 1/1M. If the cover is defective:

WARNING

Do not look into the illumination with optical lenses from the immediate proximity. This can cause injury to the eyes.

8 Decommissioning

8.1 Switching off the appliance

Note

To switch on the entire appliance it is necessary only to

switch off the freezer compartment. In so doing, the refrigerator compartment is automatically switched off as well.

8.1.1 Switching off the freezer compartment

Press ON/OFF button, freezer compartment

least 3 seconds. The temperature displays are dark. The entire appliance is

switched off.

Fig. 3 (8)

for at

8.1.2 Switching off the refrigerator compartment

Press ON/OFF button, refrigerator compartment

for at least 3 seconds. The interior light is off.

The temperature display of the refrigerator compartment is

dark.

Note

If only the refrigerator compartment is to be switched off, e.g

during holidays, then always pay attention: the freezer compartment temperature display has to shine.

Fig. 3 (1)

8.2 Taking the appliance out of service

Empty the appliance.

Pull out the power plug.

Clean the appliance (see 6.2) .

Leave the door open to prevent odour.

9 Disposing of the appliance

The appliance contains some reusable materials and should be disposed of properly - not simply with unsorted household refuse. Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance with the current local regulations and laws.

When disposing of the appliance, ensure that the refrigeration circuit is not damaged to prevent uncontrolled escape of the refrigerant it contains (data on type plate) and oil.

Page 15

Disable the appliance.

Pull out the plug.

Cut through the connecting cable.

Disposing of the appliance

Page 16

Disposing of the appliance