Liebert PS036A User Manual

Indoor/Outdoor Process Chiller

Designed for GE Signa or 1.5T Excite

• Dedicated, equipment-matched cooling supplies the proper temperature and water flow year round.

• Factory-tested, piped, wired, and charged for hassle-free start-up and operation.

• Clean, non-ferrous cooling loop, required for sensitive medical equipment.

• Local service and parts for quick and knowledgeable maintenance and service.

• Optional switch-over to alternate water source provides redundant continuous operation.

• Optional remote monitoring systems keep you informed of chiller operation.

• Standard product ETL/CSA certified.

• ISO 9000 certified company.

Signa Horizon & CV Specifications

Fluid Specified Water/Glycol

Max Heat Dissipation - BTUH (kW) 28,320 (8.3)

Fluid Temperature Range, °F (°C) 40-82 (4-28)

Temperature Gradient N/A

Fluid Flow Rate - GPM (l/m) 2.1 (8.0)

Fluid Pressure Drop - PSI (kPa) 36.0 (248)

Liebert Process Chiller Specifications

Model Number PS036A PS036A PS036A

Fluid Circulated Water Ethylene Glycol Propylene Glycol

Net Cooling Capacity - BTUH (kW) 29,500 (8.6) 29,600 (8.7) 28,800 (8.4)

Leaving Fluid Temperature ° F (° C) 50 (10) 53 (11.7) 56 (13.3)

Fluid Flow Rate - GPM (l/m) 5.3 (20.1) 5.3 (20.1) 5.3 (20.1)

Signa Horizon & CV Pressure Drop - PSI (kPa) 36.0 (248) 48 (331) 55.1 (380)

Chiller Pressure Drop - PSI (kPa) 5.1 (35.2) 6.8 (46.9) 7.8 (53.8)

Pump Total Head - PSI (kPa) 64.9 (448) 64.9 (448) 64.9 (448)

Pump HP (kW) 3 (2.2) 3 (2.2) 3 (2.2)

Indoor/Outdoor Process Chiller Designed for GE Signa or 1.5T Excite 1

A-Width

Model No.

PS036A 36 (914) 48 (1219) 32.5 (825) 515 (233) 460, 3-phase

Inches (mm)

B-Height

Inches (mm)

C-Depth

Inches (mm)

Weight

Lbs. (kg)

Voltage

(60 Hz)

208/230, 1- or 3-phase

Voltage

(50 Hz)

400, 3-phase

200/230, 1- or 3-phase

Standard Features

• Indoor/outdoor cabinet

• Hermetic compressor

• Refrigerant dehydrator

• Expansion valve

• Refrigerant receiver

• Stainless steel expansion tank

• Pressure relief valve

• Hot gas bypass capacity control valve

• Stainless steel pump

Optional Features

• Refrigerant gauges and expansion tank heater

Required Options

• 3 HP pump, SFA #E6569-06

• Bypass leg from supply to return with circuit setter on supply line and ball valve on bypass line, SFA #E6483-1

Optional Ship-Loose Accessories

• Emergency Water Switchover (EWS) module

• Enviro-source emergency bypass

• Fluid pressure gauge

•Check valve

• Dial thermometer

• Relief valve

• Circuit setter

• Ball valve

• High temperature thermostat

• Low flow switch

• Liebert RCM4 remote alarm monitor

1050 Dearborn Drive P.O. Box 29186 Columbus, OH 43229 Phone: 800.877.9222 Fax: 614.841.6022

Liebert Web Site—http://www.liebert.com

SL-16558 (2/04)

Indoor/Outdoor Process Chiller Designed for GE Signa or 1.5T Excite 2

Via Leonardo Da Vinci 8 Zona Industriale Tognana 35028 Piove Di Sacco (PD) Italy Phone: +39 049 9719 111 Fax: +39 049 5841 257

23F, Allied Kajima Bldg. 138 Gloucester Road Wanchai Hong Kong Phone: +852 2 572 2201 Fax: +852 2 831 0114

©2004 Liebert Corporation. All rights reserved throughout the world. Specifications subject to change without notice. ®Liebert and the Liebert logo are registered trademarks of Liebert Corporation. All names referred to are trademarks or regisered trademarks of their respective owners.