Liebert PS024A User Manual
Process Fluid Chiller Designed
Keeping Business in Business
For Varian CLINAC 4/100, 6/100 & 600C
• Dedicated, equipment-matched cooling supplies the proper temperature and water flow year round.
• Factory-tested, piped, wired and charged for hassle-free startup and operation.
• Clean, non-ferrous cooling loop, required for sensitive medical equipment.
• Local service and parts for quick and knowledgeable maintenance and service.
• Optional switch-over to alternate water source provides redundant, continuous operation.
• Optional remote monitoring systems keep you informed of chiller operation.
• UL/CSA listing on standard models.
• ISO 9001 certified company.
CLINAC 4/100, 6/100 & 600C Specifications
Fluid Specified Water
Heat Dissipation—BTUH (kW) 23,900 (7)
Fluid Temperature Range—°F (°C) 50-70 (10-25)
Fluid Flow Rate—GPM (l/m) 1 (3.8)
Fluid Pressure Drop—PSI (kPa) 25-40 (172-276)
Performance is based on 95°F condenser ambient.
Note:
Process Fluid Chiller Specifications
Model Number PS024A PS036A PS036A
Fluid Circulated Water Ethylene Glycol Propylene Glycol
Net Cooling Capacity—BTUH (kW) 24,300 (7.1) 24,400 (7.2) 23,900 (7.0)
Leaving Fluid Temperature—°F (°C) 61 (16.1) 47 (8.3) 50 (10)
Fluid Flow Rate—GPM (l/m) 1.3 (4.9) 1.5 (5.7) 1.6 (6.1)
CLINAC Pressure Drop—PSI (kPa) * (*) * (*) * (*)
Chiller Pressure Drop—PSI (kPa) 6.3 (43.4) 2.3 (15.9) 2.8 (19.3)
Pump Total Head—PSI (kPa) 41 (282.7) 41 (282.7) 41 (282.7)
Pump HP (kW) 3/4 (.56) 3/4 (.56) 3/4 (.56)
*Data not available
Process Fluid Chiller Designed For Varian CLINAC 4/100, 6/100 & 600C 1
AIRFLOW
OPTIONAL REFRI GERANT
PRESSURE GAUGES
SHADED AREAS
INDICATE A
RECOMMENDED CLEARANC E
FOR COMPONENT REMOVAL,
ACCESS, AND AIR F LOW.
I
H
1" MAX.
(25mm)
A
1" MAX.
(25mm)
D
36"
(914mm)
UNIT DIMENSIONAL DATA
IN
C*
2"
18"
(51mm)
(457mm)
I
H
UNIT DIMENSIONAL DATA
36"
(914mm)
B
AIRFLOW
OUT
SHADED AREAS
INDICATE A
RECOMMENDED CLEARANC E
FOR COMPONENT REMOVAL,
ACCESS, AND AIR F LOW.
36"
(914mm)
Model No.
A-Depth
in. (mm)
B-Width
in. (mm)
C-Height
in. (mm)
Weight
lbs. (kg)
Voltage
(60 Hz)
Voltage
(50 Hz)
PS018A 36 (914) 40 (1016) 25.25 (641)) 394 (178) 208/230, 1-phase 200/230, 1-phase
PS024A 36 (914) 40 (1016) 25.25 (641) 404 (183) 208/230, 1-phase 200/230, 1-phase
PS036A 36 (914) 48 (1219) 32.5 (825) 515 (233) 460, 3-phase
208/230, 1- or 3-phase
PS048A 36 (914) 53 (1346) 38.5 (978) 592 (268) 460, 3-phase
208/230, 3-phase
PS060A 36 (914) 53 (1346) 38.5 (978) 642 (291) 460, 3-phase
208/230, 3-phase
Standard Features
• Indoor/outdoor cabinet
• Hermetic compressor
• Refrigerant dehydrator
• Expansion valve
• Refrigerant receiver
• Stainless steel fluid reservoir expansion tank
• Pressure relief valve
• Hot gas bypass valve capacity control
Optional Features
• Refrigerant gauges and reservoir heater
• Stainless steel pump
Accessories
• Emergency water bypass
• Enviro-source emergency bypass
• Water level control and alarm system
•Fluid pressure gauge
•Check valve
• Dial thermometer
• Relief valve
• Circuit setter
• Ball valve
• High temperature thermostat
• Low flow switch
• Liebert RCM8 monitor
400, 3-phase
200/230, 1- or 3-phase
400, 3-phase
200/230, 1- or 3-phase
400, 3-phase
200/230, 1- or 3-phase
1050 Dearborn Drive
P.O. Box 29186
Columbus, OH 43229
Phone: 800.877.9222
Fax: 614.841.6022
Via Leonardo Da Vinci 8
Zona Industriale Tognana
35028 Piove Di Sacco
Italy
Phone: 39.049.9719.111
Fax: 39.049.5841257
Liebert Web Site—http://www.liebert.com
SL-16548 (07/00)
23/F Allied Kajima Bldg.
138 Gloucester Road
Wanchai
Hong Kong
Phone: 852.2.572.2201
Fax: 852.2.572.1182
©2000 Liebert Corporation. All rights
reserved throughout the world.
Specifications subject to change without
notice.
®Liebert and the Liebert logo are
registered trademarks of Liebert
Corporation. All names referred to are
trademarks or regisered trademarks of
their respective owners.
Process Fluid Chiller Designed For Varian CLINAC 4/100, 6/100 & 600C 2
Loading...